GOAL ZERO Skylight Manuale utente
PORTABLE AREA LIGHT
SKYLIGHT™
IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions and caution labels carefully before use to avoid
personal injury and/or damage to the unit and any connected products.
Goal Zero reserves the right to update this document without prior notice.
Please visit www.goalzero.com to find the latest product information.
DISCLAIMER
For assistance with your device, visit our contact page at
www.goalzero.com/contact or call 1-888-794-6250.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS.
• WARNING - Tip Hazard. Ensure the Skylight is properly secured. Avoid using
in windy conditions.
• WARNING - Ensure that all cords are properly secured to avoid becoming a trip
hazard.
• WARNING - Keep away from children. Do not allow children to interact with
moving parts, especially any levers or hinges.
IMPORTANT SAFETY INSTRUCTIONS
Please read all instructions and caution labels carefully before use to avoid
personal injury and/or damage to the unit and any connected products.
Goal Zero reserves the right to update this document without prior notice.
Please visit www.goalzero.com to find the latest product information.
DISCLAIMER
For assistance with your device, visit our contact page at
www.goalzero.com/contact or call 1-888-794-6250.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY
TO PERSONS.
• WARNING - Tip Hazard. Ensure the Skylight is properly secured. Avoid using
in windy conditions.
• WARNING - Ensure that all cords are properly secured to avoid becoming a trip
hazard.
• WARNING - Keep away from children. Do not allow children to interact with
moving parts, especially any levers or hinges.
1
Durable metal tripod
with independently
extendable legs
• 33Wh internal Li-ion NMC battery
• IPX4 rated for outdoor/indoor use
6 adjustable
LED light panels
Quick release adjustment
clamps to control extension
height (up to 12.5 feet)
Shoulder
Strap
Carrying
Handle
Screw-top
Cap
Stakes
included
Quick release
sliding handle
Get to Know Your Gear 1
How it Works 2
Setting Up Your Skylight 4
i. Powering the Skylight 6
ii. Runtimes 6
Taking Down Your Skylight 7
Technical Specifications 8
Français 9
Deutsch 17
Español 25
Italiano 33
Portugués 41
日本語 49
Suomalainen 57
Nederlands 65
Svenska 73
Table of Contents Get To Know Your Gear
What’s Included
1. Skylight
2. Hard Protective Carrying Case
3. 12V Aux Plug to Female 6mm Adapter
4. Stakes
1
3
2
4
1
Durable metal tripod
with independently
extendable legs
• 33Wh internal Li-ion NMC battery
• IPX4 rated for outdoor/indoor use
6 adjustable
LED light panels
Quick release adjustment
clamps to control extension
height (up to 12.5 feet)
Shoulder
Strap
Carrying
Handle
Screw-top
Cap
Stakes
included
Quick release
sliding handle
Get to Know Your Gear 1
How it Works 2
Setting Up Your Skylight 4
i. Powering the Skylight 6
ii. Runtimes 6
Taking Down Your Skylight 7
Technical Specifications 8
Français 9
Deutsch 17
Español 25
Italiano 33
Portugués 41
日本語 49
Suomalainen 57
Nederlands 65
Svenska 73
Table of Contents Get To Know Your Gear
What’s Included
1. Skylight
2. Hard Protective Carrying Case
3. 12V Aux Plug to Female 6mm Adapter
4. Stakes
1
3
2
4
32
How It Works
Long press:
Turn on/off
Short press:
Cycle through
brightness levels
Battery Level Indicator
32
How It Works
Long press:
Turn on/off
Short press:
Cycle through
brightness levels
Battery Level Indicator
54
1. Choose a flat level surface to set up the Skylight.
Unscrew the lid on your carrying case and remove
the light.
WARNING - Tip Hazard. Ensure the Skylight is
properly secured. Avoid using in windy conditions.
2. Lift the LED light petals. Detach the cable clip
from the cable and rotate the hook to release it.
(Note: As the light is extended, the cord will be
pulled through the pole). See illustration.
3. Grip the light with one hand directly above the
handle and press the button on the handle with
your other hand and pull down until it locks into
place. See illustration.
4. Adjust each individual tripod leg
a. Open the lever, extend the leg to desired height
b. Close the lever
5. Secure the light with the U shaped stakes
attached to the bottom of the tripod legs.
a. Remove the stakes from the legs by pulling away
and then up. See illustration.
Setting Up Your Skylight
b. Insert the stakes into holes in the foot of the
tripod legs at an angle. See illustration.
6. Adjust the light panels to your preferred angle.
7. Adjust the height of the light
a. Open the top lever on the pole and extend to
desired height, then close the lever to secure at
that height. See illustration.
b. Continue to the next lever and extend the height
as needed. As you extend the light, the cord will
pull through.
Use caution when adjusting the height. The
Skylight may collapse quickly if not secured when
the levers are released.
8. Plug the Skylight into the 6mm port on your Goal
Zero Yeti power station (or a 12V aux port in your
car using the adapter included with your light).
WARNING - Ensure that all cords are properly
secured to avoid becoming a trip hazard.
9. Use the wired remote to turn the light on. Press
and hold the button to power it on. Then press the
button to cycle through brightness settings.
NOTE: For additional stability, you can attach a heavy
stable object or your Yeti power station to the hook at
the center of the tripod. See illustration.
WARNING - Keep away from children. Do not allow
children to interact with moving parts, especially any
levers or hinges.
2
3
90˚
5b
7
5a
54
1. Choose a flat level surface to set up the Skylight.
Unscrew the lid on your carrying case and remove
the light.
WARNING - Tip Hazard. Ensure the Skylight is
properly secured. Avoid using in windy conditions.
2. Lift the LED light petals. Detach the cable clip
from the cable and rotate the hook to release it.
(Note: As the light is extended, the cord will be
pulled through the pole). See illustration.
3. Grip the light with one hand directly above the
handle and press the button on the handle with
your other hand and pull down until it locks into
place. See illustration.
4. Adjust each individual tripod leg
a. Open the lever, extend the leg to desired height
b. Close the lever
5. Secure the light with the U shaped stakes
attached to the bottom of the tripod legs.
a. Remove the stakes from the legs by pulling away
and then up. See illustration.
Setting Up Your Skylight
b. Insert the stakes into holes in the foot of the
tripod legs at an angle. See illustration.
6. Adjust the light panels to your preferred angle.
7. Adjust the height of the light
a. Open the top lever on the pole and extend to
desired height, then close the lever to secure at
that height. See illustration.
b. Continue to the next lever and extend the height
as needed. As you extend the light, the cord will
pull through.
Use caution when adjusting the height. The
Skylight may collapse quickly if not secured when
the levers are released.
8. Plug the Skylight into the 6mm port on your Goal
Zero Yeti power station (or a 12V aux port in your
car using the adapter included with your light).
WARNING - Ensure that all cords are properly
secured to avoid becoming a trip hazard.
9. Use the wired remote to turn the light on. Press
and hold the button to power it on. Then press the
button to cycle through brightness settings.
NOTE: For additional stability, you can attach a heavy
stable object or your Yeti power station to the hook at
the center of the tripod. See illustration.
WARNING - Keep away from children. Do not allow
children to interact with moving parts, especially any
levers or hinges.
2
3
90˚
5b
7
5a
76
LIGHT RUNTIMES WITH A YETI POWER STATION
GOAL ZERO
POWER
STATION
RUNTIME ON
LOW RUNTIME ON
MEDIUM RUNTIME ON
HIGH RUNTIME ON
BOOST
125 hours 40 hours 15 hours 8 hours
250 hours 80 hours 30 hours 15 hours
375 hours 125 hours 45 hours 20 hours
Plug the 6mm charging cable into one of the 12V 6mm ports on your Yeti to power your
Skylight. This will also charge the internal battery. You can also use the included 10A
car charging cable/adapter to power/charge from a vehicle or any 12Vvehicle auxiliary
power port (including a Yeti).
Powering the Skylight
Runtimes
NOTE: The highest brightness level (Boost) requires external power (Yeti power station,
vehicle, etc.)
Light runtimes on internal battery
As the battery discharges and voltage drops, your brightness settings will automatically
adjust to preserve battery life.
• Low setting (400 Lumens): 8 hours
• Medium setting (1350 Lumens): 2.5 hours (then it will auto adjust brightness
setting to preserve battery life)
• High setting (3500 Lumens): 1 hour (then it will auto adjust brightness setting to
preserve battery life)
1. Turn off the Skylight, unplug it from power, and
make sure the area is clear.
2. Open the bottom lever on the pole to collapse the
light. Then repeat with levers above. Once all are
collapsed, close the levers.
Use caution when collapsing the Skylight
extensions. The Skylight may collapse quickly if
not secured when the levers are released.
3. Remove the U-shaped stakes from the feet of the
tripod. Insert the stakes down into the holes on the
tripod leg and snap the stakes back onto the tripod
legs.
4. Press the button on the handle and slide up to
collapse the tripod.
5. Collapse all extended legs by opening the lever,
adjusting, and closing the lever to secure.
6. Wrap the power cord back around the hook.
7. Fold light petals down and insert the Skylight into
the carrying case feet first.
Taking Down Your Skylight
7
3
Altri manuali per Skylight
1
Indice
Altri manuali GOAL ZERO Attrezzatura di illuminazione
GOAL ZERO
GOAL ZERO Light-A-Life mini Manuale utente
GOAL ZERO
GOAL ZERO Crush Light Chroma Manuale utente
GOAL ZERO
GOAL ZERO Torch 500 Manuale utente
GOAL ZERO
GOAL ZERO LIGHT-A-LIFE Manuale utente
GOAL ZERO
GOAL ZERO LIGHTHOUSE micro CHARGE Manuale utente
GOAL ZERO
GOAL ZERO Light-A-Life Quad Manuale utente
GOAL ZERO
GOAL ZERO Skylight Manuale utente
GOAL ZERO
GOAL ZERO TORCH 500 Manuale utente
GOAL ZERO
GOAL ZERO Lighta Life 350 Manuale utente
GOAL ZERO
GOAL ZERO CRUSHLIGHT CHROMA Manuale utente
