GoFlight GF-T8 Manuale utente
GF-T8 MANUAL 2012
1
Virtual Pilot Operating Handbook
`
GF-T8 GFT8 2
8-Toggle Switch/LED Panel
Cockpit Control System
Congratulations on your purchase of a
GoFlight GF-T8 (8-Toggle Switch/LED
Panel Module), part of the extensive
family of GoFlight GF Cockpit Control
System modules.
The GF-T8 is designed to operate with a
wide variety of simulated aircraft and is
sure to make your flight simulation experience more realistic and enjoyable.
The steps below will assist in ensuring the GF-T8 will be easy to install, configure and use. Following
these instructions will help to get you up in the “virtual skies”as quickly as possible.
NOTE If you own other GoFlight hardware and have already installed the most
current
version of software on your system, you do not need to install the software
again.
Simply skip the software installation steps in the instructions
below.
Installing a GF-T8 Module
1. Using a web browser go to www.goflightinc.com.
2. On the GoFlight home page click Support.
3. Click on “GF Config x.xx”to download the latest module drivers and configuration
software.
4. Click “Run” or “Save” and then follow the instructions to install the software.
If the software installer detects that GoFlight software is already installed on your system, it will
prompt you to overwrite. Click the Yes button to overwrite the existing version of GoFlight
software. This is useful if you wish to keep the configuration settings for other GoFlight
modules installed on your system. However, you should first make sure that the software you
are overwriting is an older version and not a newer one.
5. If you are going to mount the GF-T8 module into a GoFlight module rack, install the module in
any desired location in the rack using the two thumbscrews provided.
GF-T8 MANUAL 2012
2
Virtual Pilot Operating Handbook
NOTE: When tightening the GF-T8 mounting thumbscrews, be careful not
to
over-tighten the screws as it is possible to strip the threads in the mounting
holes
or break the mounting screws if excessive force is
applied.
6. Plug the provided USB cable “B” connector end (square) into the connector on the back of the
GF-T8 module.
7. Plug the USB cable “A”connector end (rectangular) into a USB port on your computer or hub.
The message “New Hardware Found”may appear briefly, showing that the GF-T8 was
detected.
*To configure your GF-T8 for use with your favorite flight simulator, run the GFConfig program.
Either click
Start-->Programs-->GoFlight
to access the GoFlight program
or…
*Double-click on the GoFlight Config icon on your desktop, if you chose to create one
8. Click on the graphic illustration of the GF-T8. It will become highlighted in a red outlined border.
Then assign the desired function for each toggle switch from the drop-down list provided for
each of the 8 toggle switches.
Please be sure to also refer to the GF-T8 functionality as described in GFConfig On-Line Help
-
under Help on the GFConfig menu bar, Select the Contents tab. Then select the GF-AC
Function
Reference and then select the GF-ATC Function Reference. Here you will find all the
usable
functions with their definitions and Usage Notes for the GF-T8
module.
GF-T8 MANUAL 2012
3
Virtual Pilot Operating Handbook
GF-T8 Warranty
This product is warranted to the original purchaser to be free from defects in materials and workmanship for a period
of one (1) year from the date of purchase. During this warranty period, GoFlight Technologies, Inc. ® (“GoFlight”) will,
at its option, repair or replace, at no charge, any component determined to be defective. The liability under this
warranty is limited to the repair and/or replacement of the defect or defective part, and does not include shipping
expenses. This warranty does not apply if, in the determination of GoFlight, this product has been damaged by
accident, abuse, improper usage, or as a result of service or modification by anyone other than GoFlight.
NO OTHER WARRANTIES ARE EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF SALABILITY AND FITNESS FOR A PARTICULAR PURPOSE. GOFLIGHT TECHNOLOGIES,
INC. IS NOT RESPONSIBLE FOR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
GoFlight Technologies, Inc. 163 SW Freeman Ave. Suite D, Hillsboro, Oregon, USA
97123
Phone:
1-503-895-0242
www.goflightinc.com
P/N GF=T8-vPOH-002 Revision 2.2 25Sep2010
Copyright © 2010 GoFlight Technologies, Inc. All rights reserved.
GF-T8 MANUAL 2012
3
Virtual Pilot Operating Handbook
Indice
Altri manuali GoFlight Pannello di controllo
