goodnature X-1 mini pro Manuale utente
SERIAL #
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
02
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
MACHINE SPECIFICATIONS
Introduction
VAC: 120V | Amps: 9A | Frequency: 60Hz
Single Phase | IPX1 / Max operating pressure: 80 psi
Weight: 150 lb
WARNING: To limit risk of potential injury and material damage, all users must read these instructions
in their entirety and follow them strictly.
Check our YouTube channel at youtube.com/goodnaturepro for video guides and how-to’s, which we update regularly.
The X-1 Mini Pro is a commercial cold-press juicer that allows you to serve your customer fresh, cold-pressed juice in
minutes. The patent pending Herbivore® Grinder and Adaptive Pressing System work together in perfect harmony to
bring you the world’s greatest juice.
APPLICATION
WHOLEFRUIT
HOPPER
ADAPTIVE
PRESSING
SYSTEM
FRESHFILTER®
PRESS BAGS
PRESSAFE
INTERLOCKS
HERBIVORE®
GRINDER
ELEGANT
DESIGN
03
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Table of Contents
SECTION 1
SECTION 2
SECTION 3
SECTION 4
SECTION 5
SECTION 6
SECTION 6A
SECTION 6B
SECTION 7
SECTION 8
SECTION 9
SECTION 10
SECTION 11
PAGE 04
PAGE 05
PAGE 06
PAGE 07
PAGE 14
PAGE 15
PAGE 18
PAGE 19
PAGE 22
PAGE 23
PAGE 24
PAGE 24
PAGE 24
Safety Precautions
Unpacking
Enclosed Parts List
Setup
Produce Preparation
Operation
Grinder Operation
Press Operation
Cleaning
Maintenance
Warranty
Replacement Parts
Contact Information
04
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 1: Safety Precautions
DANGER: This machine is not intended for use by persons (including children) with reduced physical,
sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the machine by a person responsible for their safety.
WARNING: Disconnect all power before performing maintenance to avoid risk of serious electric shock and
mechanical hazards.
WARNING: Always check with your local health department regarding procedures required to ensure proper
cleaning and sanitation in order to avoid serious food borne illness to consumers. For the US: FDA.gov/food.
WARNING: Discontinue use immediately and have machine serviced if any components are damaged or
malfunctioning to avoid risk of personal injury and damage to the machine.
WARNING: Never tamper with or override any of the safety features of the machine, including the press
chamber cover. Tampering with safety features can result in unsafe operating condition and can result in
harm to the operator.
WARNING: Be aware of all pinch points and moving parts, and take precautions to keep loose clothing, hair, or
foreign objects away from them to avoid personal injury and damage to the machine.
DANGER: Never place any body parts inside the unit while the machine is running. Failure to follow this
instruction could result in serious personal injury due to crushing or cutting. Never place hands, body parts,
clothing, hair or any foreign object in machine while it is operating. Failure to do so can result in bodily harm,
or damage to the machine.
CAUTION: Only locate or set up machine on a sturdy counter or cart with locked casters.
05
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 2: Unpacking
Inspect the shipping container of your new press prior to opening. Ensure it is free of any handling damage that
may have occurred during shipping. Notify the shipping carrier of any damage to the shipping container as soon as
it is received.
Carefully open the shipping container, inspecting for any damage.
If any items are damaged, notify the freight carrier as soon as possible.
Review the enclosed parts list on the next page. Inspect all enclosed parts carefully and make sure no parts are
missing. If any parts are missing or damaged, please contact Goodnature.
Machine comes bolted to the base of the packaging to prevent damage. With the supplied 9/16” wrench, remove
bolts from feet of machine by turning them counter-clockwise. These can be accessed from the side of the crate,
underneath the platform.
Once machine has been unbolted from the base, the feet can be attached to the machine by screwing them into the
legs. Do not tip machine onto its side.
Machine can be lifted onto the counter, table, or cart where it is intended to be used.
After unpacking, review the X-1 Mini Pro diagrams in section 3 to become familiar with the features and
components of the machine.
We recommend cleaning the machine and components prior to its first use. The cleaning procedure is located in
section 7 of this manual.
Prior to applying any electrical power to the equipment, complete the SETUP steps of the setup section.
Machine should be lifted by a minimum of two able people. One person can lift from the front legs of the machine near
the feet, and one person can lift from the rear legs. We recommend removing all removable parts before lifting.
1
2
3
4
5
6
7
8
9
LIFT INSTRUCTIONS
PREASSEMBLY STEPS
06
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 3: Enclosed Parts List
Pusher
Agitator Knob
Front Press Rack
X-1 Mini FreshFilter® Press Bags Tool Kit & Accessories
Grinder Ring
Press Chamber
Vibration Pad
Hopper Door
Press Guard
Moving Platen
Hopper
Grinder Disc
Bottom Press Rack
07
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 4: Setup
The grinder can be freely rotated to
the “Up” position. To rotate “Down”,
press in and hold the release button.
While lowering, guide the hopper
with opposite hand.
08
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 4: Setup
PRESS SETUP
09
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 4: Setup
Insert the Bottom Press Rack into
the Press Chamber, by sliding it
down from the top of the chamber
until it drops in place.
Place the Moving Platen snugly into
the back of the Press Chamber, with
the grooves facing toward the front
of the press.
Slide the Front Press Rack into
place. The round cutouts on the top
edge should go around the pins in
the Press Chamber.
Place FreshFilter® Press Bag in the
Press Chamber.
Place the Press Chamber snugly
into the front of the press.
Push each side of the FreshFilter®
Press Bag over the Bag Pins, so the
pins are protruding through the
bag.
1
4
2
5
3
6
10
25
X-1 MINI PRO OWNER’S MANUAL
ASSEMBLY & OPERATOR INSTRUCTIONS
Section 4: Setup
HERBIVORE® GRINDER SETUP
Altri manuali per X-1 mini pro
2
Indice
Altri manuali goodnature Spremiagrumi
