Goodyear GY500X Manuale utente

Model, Modelo : GY500X

n a v i g at i o n s y s t e m u s e r g u i d e

sistema de navegaCiÓn manuaL deL usuario

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA

Contents

In the Box 2

Charging your GPS 2

Quick Start Guide 3

The GPS Unit 4

What’s in the Box 5

What’s On Screen 6

Common Tasks 7-10

Set up Vehicle Profiles 7

Plan a Simple Route 7

Plan a Multi-Stop Route 8

Find a Point of Interest near your Current Location 8

Find a Point of Interest near a Specific Location 8

Add/Manage your Favorites 9

Set up your Bluetooth Hands Free Connection 9

Sync your Mobile Phone’s Phonebook to the GPS 9-10

GPS Setup 10

Troubleshooting 11

Warning Information 12

Warning 12

Battery Warnings 12

Important Information 12

FCC Compliance 13

Industry Canada Compliance 13

Limited Warranty 14

In The Box

Your Goodyear GY500X box contains the following items :

(1) Navigation Unit

(1) Instruction Manual

(1) Car Charger

(1) USB Cable

(1) Windshield Mount and Bracket

(1) External Antenna

(1) Dashboard Disc

(1) Home Charger A/C

Note : The USB Cable is used for software upgrades to your GPS unit. It can also be used to

charge your GPS when not in a vehicle – simply turn the GPS to the O position, and connect

the USB cable to the GPS and to a computer to charge.

Charging your GPS

To charge your GPS, plug it into the car charger included with the device. You may also use

the included USB Cable to charge the GPS by connecting it to any computer. For faster

charging, be sure that the GPS unit is switched to the O position. Fully charge for 6 hours

before rst use. The LED indicator on the front of the GPS unit will show Red for charging,

or Green for charging complete.

WARNING : This product contains a non-user-replaceable lithium-ion battery.

See the Battery Warnings section for important battery safety information.

Quick Start Guide

•Step 1 : Prepare the GPS Mount

Select a suitable location to mount your GPS unit. Clean and dry the suction

cup and the selected area of your windshield.

Fit the bracket onto the windshield mount, making sure that it locks into place.

Hold the windshield mount at against the windshield (or onto the dashboard disc),

and push the lever back to secure the mount.

•Step 2 : Turn the GPS On

Plug the power cable into the GPS, and the other end into your vehicle’s power outlet.

Activate the unit using the On/O power switch on the back.

Place the GPS onto the mount by tting the bottom of the GPS onto the bracket,

then gently pushing the top of the GPS back until it snaps into the bracket.

Adjust the mount until you have a comfortable viewing angle.

•Step 3 : Software License Agreement

When your GPS starts for the rst time, you will be presented with license agreement.

You must accept the Agreement to continue.

• Step 4 : Vehicle Details

On this page, you can enter your vehicle dimensions, weight, hazardous material levels, and

choose on-screen icons to display, Select each vehicle attribute that you wish the GY500X

to consider for commercial navigation. To save your Vehicle Details for future routes, click

Save/Load Settings.

Note : TO DISABLE COMMERICAL VEHICLE ROUTING and to use the GY500X as a regular

passenger vehicle GPS, click Enabled – the icon will change to“Enabled: No.”

Click the left arrow icon on the bottom right of the screen to continue.

•Step 5 : Goodyear Disclaimer

You must read and accept the Disclaimer to continue.

•Step 6 : Select your Destination

The GY500X comes with two modes – Easy Navigation mode and Full Navigation mode. The unit

starts in Easy Navigation mode by default, and from here you can select An Address, a Point of

Interest, or Just Drive (display map). See“Common Tasks”for a guide on entering your address,

nding a point of interest, or planning a multi-stop route.

•Step 7 : Drive!

The GPS will give you audio prompts and turn-by-turn navigation. It will automatically reroute

if you go o-course, so there’s no need to touch the screen again once your course is set.

Questions? Call customer service toll-free at 1-800-730-3707.

We are available to help Mon-Fri 10am to 6pm EST. 3

The GPS Unit - GY500X

SD Slot

Port for External Antenna

On / O Switch

Speaker

Stylus

Audio Out

Sleep / Resume Button

LCD Touchscreen

Mini USB Port for Charging

(on bottom)

Power Indicator

Bluetooth Indicator

What’s In The Box

GY500X Unit USB Cable

Windshield Mount and Bracket

A/C Home Charger

Product Manual

Premium Dash Mounting Disc

25Ft. External Antenna

12V Car Charger

Sleep / Resume Button

Power Indicator

What’s On Screen

Explanation of GPS map screen

The top left bar shows the upcoming turn direction and distance.

The on-screen compass at the top shows your current direction.

Tap the + or – icons to zoom in or out of the map.

The left Info. box shows your Estimated Time of Arrival, Journey Time, Distance to Go,

Speed and Direction, or GPS Signal Strength (Tap any box to change).

Tap to change Current / Next Road.

Bluetooth icon.

Volume Settings – tap this icon to raise or lower the speech volume and button volume.

GPS Satellite Strength – Red means weak or no signal. You can tap this icon to see a

larger compass, number of satellites present, and your current latitude and longitude.

Battery Indicator – shows current battery strength, or if the GPS unit is plugged

into a power source.

Local Points of Interest icons show selected locations nearby.

1 •

2 •

3 •

4 •

5 •

6 •

7 •

8 •

9 •

10 •

567

Set up Vehicle Proles

1) When your GPS rst starts, change the options that are applicable for your vehicle.

For example, if you are driving a large commercial truck, you may select “Favor preferred

truck routes”to select specic routes that are rated for commercial vehicles.

2) Select “Gross Weight,”“Axle Weight,”and “Height,”“Length”and“Width”to set the correct

parameters for your vehicle.

3) Select “Hazardous Materials”to change the HazMat categories applicable to your vehicle load.

4) When done setting up the vehicle, select“Save/Load Settings”and then“Save Current” to

save this prole.

5) Type a name for the prole (i.e.“Truck 1 No Load”) and tap“Go”when nished.

6) The next time you want to select this prole, select“Save/Load Settings”and choose

your named prole..

Tip : You may save up to 50 vehicle proles.

Plan a Simple Route

In Easy Navigation Mode:

1) Select “An Address”.

2) Follow the on-screen guide to enter the Zip Code, City, or State of the address.

3) Continue with #3 below.

In Full Navigation Mode:

1) Select“Drive To”.

2) Select “Recent” to choose a recent address, or select“Enter Address”for a new address.

Note : You may wish to“Select State”to choose a dierent state than the one listed.

3) Begin typing the City or Zip Code for your address, and tap GO when you see it appear

on screen.

4) Begin typing the Street name for your address, and tap GO when you see it appear on screen.

Tip : If your street name is not listed, try entering it in a dierent manner. For example, streets

with directionals in them (East, West) might be listed with just the street name. For“East Main St,”

try typing “Main St.” If your street name does not appear, select“Try Wider Search” to look for the

street in surrounding areas. Some streets are listed dierently in dierent maps – for example,

“Route 25”might be listed at“Rt 25”or“US Route 25.” When in doubt, you should consult an online

map site to see how the street is ocially listed.

5) Type the house number and tap GO when it is complete.

Common Tasks

This section deals with the most common tasks when using your GY500X.

Some of the tasks have dierent directions depending on whether you are

currently in Easy Navigation or Full Navigation modes.

Plan a Multi-Stop Route (Full Navigation Mode only)

1) Select “Plan Route”.

2) By default, the route will begin from your current location. To change this, select “Start”

and Enter the Address from your start point.

3) Select “End” and select “Enter Address”to input your nal destination.

4) Select “Add Via”to enter any stops along the route – you may select a recent address,

enter a new address, a point of interest, or choose from your favorites.

5) When ready, tap“Options.” From here you can see a full Route Map, view a Demo of the

actual drive, see the Route Text (including all turns, distances per turn, and estimated time),

or hit“Drive”to start your route.

Find a Point of Interest near your Current Location

In Easy Navigation Mode:

1) Where would you like to go - Click“A Point of Interest”.

2) Find your POI by starting with - Click “Your Current Location”.

3) Choose a POI category.

4) The closest POI in your category is listed – you may start typing to nd a specic business,

or hit the down arrow to see a full list sorted by distance.

5) Tap your selected POI to navigate to that location.

In Full Navigation Mode:

1) Select“Drive To”.

2) Select “POI”.

3) Choose a POI category.

4) The closest POI in your category is listed – you may start typing to nd a specic business,

or hit the down arrow to see a full list sorted by distance.

5) Tap your selected POI to navigate to that location.

Tip : If you do not have a good GPS signal, the GPS will ask you for your start address to

nd a nearby POI.

Tip : You can also select a POI while on route – simply tap the map screen, then tap POI.

Find a Point of Interest near a Specic Location (Full Navigation Mode only)

1) Select “Enter Address”.

2) Enter your City or Zip code.

3) You may select “POI near town”to nd all POIs in that area, or continue entering a street

name and/or a house number.

4) At any time during the address input, you may select “POI near…”to choose a POI near

your selected city, street, or exact address.

Indice

Lingue:

Altri manuali Goodyear Sistema di navigazione per auto

Goodyear

Goodyear GY120 Manuale utente

Goodyear

Goodyear GY130 Manuale utente

Manuali Sistema di navigazione per auto popolari di altre marche

Clarion

Clarion Navigation In-Car Entertainment Manuale utente

Rosen

Rosen DP-1001 Manuale utente

Alpine

Alpine INE-W970HD Manuale utente

Skoda

Skoda AMUNDSEN+ Manuale utente

Blaupunkt

Blaupunkt TravelPilot DX-N Manuale utente

Pioneer

Pioneer MZ360500EX Manuale utente

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Manuale utente

Kenwood

Kenwood DNN991HD Manuale utente

AvMap

AvMap Geosat 2C Manuale utente

Eonon

Eonon GE01B Manuale utente

Pioneer

Pioneer AVIC-Z920DAB Manuale utente

Nextar

Nextar M3-MX - Automotive GPS Receiver Manuale utente

Furrion

Furrion NV2200 Manuale utente

Mio

Mio MOOV 200-Series Manuale utente

Prestigio

Prestigio GeoVision 5150 Manuale utente

Hummer

Hummer 2006 H3 Manuale utente

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Guida alla configurazione

Garmin

Garmin StreetPilot c510 Manuale utente