GOOVIS Pro 2021 Manuale utente
Quick Start Guide
Schnellstartanleitung
Pro
1
To begin using the GOOVIS Pro as quickly as possible, please carefully read this
GOOVIS Pro Quick Start Guide. All pictures here are for general reference only. All
procedures should be based on the actual product received. Shenzhen NED Optics
Co., Ltd. reserves the right of final interpretation.
©2023 Shenzhen NED Optics Co., Ltd. All rights reserved.
Thanks for using the GOOVIS Pro
2
Headband
1. Getting to Know Your GOOVIS Pro
GOOVIS HDMI Adapter
(Free gift)
Pro Headset
Lens Cleaning Cloth
Carrying Case
3
M
Headband Interface
Status Light
• Headset Functions and User Interface
Head Support
Replaceable Face Cushion
HDMI Cable
Earphone Jack
Diopter Adjustment Knob
3D/2D Switch
IPD Adjustment Range
Brightness Adjustment
Display Mode Switch
The Status Light is as follows:
After the headset is powered on
When there is no HDMI video signal input,
the Status Light is flashing;
When there is an HDMI video signal input,
the Status Light is always on.
Press the Brightness Adjustment plus button
for 3 seconds long to turn off/on the status light.
4
1) Pull up the support of the headset gently to the position shown in the figure below.
2. Fitting and Adjustment
5
Headband connection method 1: side strap + top strap
Headband connection method 2: side strap only
2) Connect the ends on both sides of the head strap to the support shown in the figure below
by sliding the ends of the straps in to the slots from below.
6
You can connect GOOVIS Pro via HDMI adapter cable and/or GOOVIS Wireless Cast to GOOVIS
portable media player, HD Blu-ray players, mobile phones/tablets/laptops, desktop
computers/drones/PS4, SWITCH, Xbox and other game consoles/TV set-top-boxes etc.,
which with HDMI video output device, and enjoy the wonderful vision of high-definition large screen.
Please check our website for more detail information. https://www.goovis.net
3. External Device Connection
7
Diopter Adjustment
IPD Adjustment
The GOOVIS Pro accommodates a vision range from +3D hyperopia to -8D myopia, and an IPD
(Interpupillary Distance) from 56mm to 72mm, and separate adjustment of each of the left and
right eyes. For easy vision adjustment, we suggest that, before putting on the headset, you can
initially rotate the vision adjustment knob to a hyperopia/myopia scale that corresponds
somewhat to your eye sight.
• Performing Initial Vision Adjustment
M
Scale
Diopter
-2
-2D myopia -4D myopia -6D myopia -8D myopia
-4 -6 -8 +2
+2D hyperopia
Mapping between the scales on the vision adjustment knob and the diopter
Astigmatic lenses are optional in case of needs. If you are astigmatic, please contact us by
sending your diopters and axis of astigmatism information order the Lenses, check with our
website: www.goovis.net
Hyperopia Adjustment Range
Myopia Adjustment Range
Mark
line
8
Adjust the length of the headband until the strap fits your head circumference so that you can
easily put the headset on your head. Adjust the headset to the right height and angle so that
you can comfortably watch the display window. You can also adjust the headset itself by tilting
it slightly up or down.
• Wearing the GOOVIS Pro Headset
Flippable
Tip: Before putting on the headset, make sure that the lenses on the Pro display windows are clean.
Brightness Adjustment：Seven different levels of brightness available for gradual adjustment.
Press the Brightness Adjustment plus button for 3 seconds long to turn off/on the status
light.
3D/2D switch key: The product is set with two types of video modes: standard and Blu-ray,
which will automatically recognize and enter according to the input signal. By clicking The
3D/2D switch key can switch the video format supported by the headset in the current mode.
In the standard mode, press the 3D/2D switch key to switch between 2D video (2D Video), left and
right 3D (Side by Side), up and down 3D (Top and Bottom). The three video formats are cyclically
switched, and the mode that matches the video format is selected to watch.
• Performing Brightness Adjustment,3D/2D Mode & Video Display Mode Adjustment
M
9
When the headset sits comfortably on your head, rotate the diopter adjustment knobs to the
clockwise or counterclockwise to bring the image into sharp focus. Please close your right eye
when adjusting your left eye, and vice versa. It is suggested that, when adjusting the vision, you
begin from the blurry state until the image is sharpest, without any overlaps or shadows in the
field of view. After adjusting for sharpness in each eye separately, open both eyes, and move
the knobs towards or away from the center in order to find the correct IPD for your viewing
comfort.
Tip: It is very important for you to perform accurate visual adjustment before watching,
otherwise you may feel dizzy or uncomfortable.
• Performing Accurate Visual Adjustment
Brightness Adjustment Display Mode Switch
3D/2D Switch
Altri manuali per Pro 2021
1
Indice
Lingue:
Altri manuali GOOVIS Visore per realtà virtuale
