Gosafe G6S Manuale utente
G6S User Manual
V1.2
Copyright © 2013 Gosafe
G6S User Manual
2
ATTENTION!
Do not disassemble the device. Do not touch before unplugging the power supply if the device is
damaged, the power supply cables are not isolated or the isolation is damaged.
All wireless data transferring devices produce interference that may affect other devices which are
placed nearby.
The device may be connected only by qualified individuals.
The device must be firmly fastened in the predefined location.
The device is susceptible to water and humidity.
INSTRUCTIONS OF SAFETY
This chapter contains information on how to operate “G6S” safely.
BY following these requirements and recommendations you will avoid dangerous situations. You must
read these instructions carefully and follow the strictly before operating the device!
The device uses a 8V-32V DC power supply. The nominal voltage is 12V DC. It is advised to transport
the G6S device in an impact-proof package.
Before usage, the device should be placed so that its LED indicators are visible, which show what
status of operation the device is in.
When connecting the connection (2x8) cables to the vehicle, the appropriate jumpers of the power
supply of the vehicle should be disconnected.
Before dismounting the device from the vehicle, the (2x8) connection must be disconnected.
G6S User Manual
3
LEGAL NOTICE
Copyright © 2013 Gosafe
All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this
document in any form without the prior written permission of Gosafe is prohibited.
1-Wire is a registered trademark of Dallas Semiconductor.
Other products and company names mentioned herein may be trademarks or trade names of their
respective owners.
INTRODUCTION
The G6S Feature Rich Powerful GPS Tracker is the latest solution for track and trace applications and
extreme level fleet management.
G6S is designed for service providers, integrators, and enterprise customers to enhance mobile
resources and improve their dispatch system; the G6S is a dependable quad-band GSM/GPRS tracking
device, delivering the key features fulfilling the most demanding applications: fleet management,
insurance telemetric, dispatch, vehicle location and recovery, and more.
With accurate GPS location performance, a robust programmable rules engine, 3-axis accelerometer for
measuring driver behavior and vehicle impacts, geo-fencing, messaging and much more, the G6S is
designed for powerful solution deployment. The G6S also includes optional routing and optimization
with Garmin® FMI (Fleet Management Interface) - a key part of today’s fleet management.
The G6S is powered by over-the-air device management and maintenance system, (Programming,
Updates, and Logistics System). FOTA (Firmware update over the air), GSM Jamming detection and 32
hardware based geo-fences makes this the perfect choice for superior safety and security of your
vehicle.
G6S User Manual
4
Contents
ATTENTION!.........................................................................2
INSTRUCTIONS OF SAFETY.................................................. 2
LEGAL NOTICE..................................................................... 3
INTRODUCTION................................................................... 3
1. Packing List...................................................................... 4
2. Specifications.................................................................. 5
3. Overview......................................................................... 6
4. Installation.......................................................................8
5. I/O Connector................................................................10
6. LED Indicator Behavior.................................................. 11
7. User Command............................................................. 11
8. Message Explanation.................................................... 13
Appendix........................................................................... 16
Optional accessory........................................................ 16
G6S User Manual
5
1. Packing List
￭Standard
The G6S box is packaged with all the components that is necessary for operation, it contains:
G6S device x1
2*8 PIN I/O connector cable x1
To connect with external power
supply and optional accessory
To the back panel of
device
NOTE: SIM card which for GSM/GPRS connectivity is not supplied in the package, please consult your
local SIM provider for further information.
￭Optional accessory
Name Purpose
USB cable To configure device via configuration tool
External GPS antenna It helps to fix GPS faster
Microphone It enables device to collect sound for voice monitoring
Speaker It enables device to play sound for call
iButton For driver ID verification via 1WIRE link
DS18B20 Tempreture sensor via 1WIRE link
Immobilizer It enables the device to kill/restore engine
Panic button Device reports certain message when this button is being pressed
RS232 to DB9 Converter for connection with computer
RS232 to GARMIN Output for GARMIN PND
Magic tape It helps to fix device
Fuse Protecting device from over voltage
Backup battery Li-Po 3.7V, 250mAh
Please refer chapter Appendix for further details and installation guide for optional accessory
G6S User Manual
6
2. Specifications
Physical Dimension 80(L)x51.5(W)x26(H)mm
Weight ~75g (With battery)
Environment Operating temperature -40℃~+80℃(not using backup battery)
-10℃~+50℃(using backup battery)
I/O connector
ACC input 1 channel
Digital input 2 channels
Analog/Digital
selectable 2 channels
Digital output 3 channels
1Wire 1WIRE device data link
RS232 convert RXD/TXD
Microphone 1 channel
Speaker SPK+/SPK-
USB Mini USB
CPU ARM STM32F103 UcOS
LED indicator GSM,GPS,POWER
Power supply
External DC 8 to 32V
Backup battery Type Li-Po 3.7V, 250mAh
Power
consumption Standby: ~70mA@12V, Working: ~100mA@12V
GSM/GPRS
Antenna Internal
Model
Cinterion: BGS2-W
Quad band: GSM 850/900/1800/1900MHz
Multiple-slot Class 8 (dual band)
or 10 (quad band)
GPRS class 10/Station class B
TCP/IP over PPP
SIM card 1.8/3.3V
GPS
Internal antenna 25X25 with amplifier
External antenna GPS Active Antenna
Model uBlox NEO 6M
Channel 50 Parallel Channels
Accuracy Autonomous<2.5M
Sensitivity -162dBm
Sensor Vibration sensor Internal
Accelerate sensor 2D
Flash storage 4Mbits
G6S User Manual
7
3. Overview
3.1. Device Capabilities
FOTA (Firmware Update OTA)
Flexible Programming Rules
Garmin® FMI (Fleet Management Interface) enable
1-Wire® Interface
GSM Jamming Detection
Quad Band GSM Modem
HDOP for Precise Location
Multiple Data Upload Modes
2-axis accelerometer sensor
156 Hardware Based Geo-Fence/Point of interest
Over Speed Management
Multiple Inputs & Outputs
Configurable Inputs & Outputs
Internal Backup Battery
G6S User Manual
8
3.2. Mechanical construction
￭Front panel view
￭Rear panel view
Battery power supply switcher
Cover remove slot
USB cable port
2*8 sockets I/O connector
GPS external antenna connector
LED indicator
This side towards to the sky,
G6S User Manual
9
4. Installation
4.1. Remove the cover
4.2. Insert the SIM card
1, On the front panel of the device, there
is a small slot at the top of it.
2, Find a screwer or sticker, insert it to the
slot a little bit.
3, Swing the screwer at the direction as
illustrated then the cover will slide out.
1, Flip up cover of sim holder, facing metal
side of SIM card to the PCB board as
illustracted.
2, Insert SIM card to cover then flip it
down, pull the cover at the direction as
to lock up sim card firmly.
Note: For this step please disconnect
any kind of power source for device in
advance.
G6S User Manual
10
4.3. Install direction
￭G6S has accident detecting functionality that based on hardware G-sensor. Its accuracy will be
affected by install direction of device, please find the sticker on housing of device for recommended
direction。
By default you need to point side “0” to the engine,
which is the direction of vehicle heading.
If you prefer other side pointing to engine, please
send command to change the default setting of
installation direction.
E.g.:
Side “1” is pointing to engine,
Command to send:
1234,BDS;1
Note: 1234 is the default user password to send
command, and default is 1234,BDS;0
*Command BDS must be enabled for User.
*For user please set phone number as UNO before
sending this command.
Altri manuali per G6S
2
Indice
Altri manuali Gosafe GPS
Gosafe
Gosafe G1C Manuale utente
Gosafe
Gosafe GOS-606 i Manuale utente
Gosafe
Gosafe G626 Manuale utente
Gosafe
Gosafe G6S Manuale utente
Gosafe
Gosafe G79 Manuale utente
Gosafe
Gosafe G606 Manuale utente
Gosafe
Gosafe G91I Manuale utente
Gosafe
Gosafe G6S Manuale utente
Gosafe
Gosafe G626 Manuale utente
Gosafe
Gosafe G7S Manuale utente
