Gotie GSJ-600 Manuale utente
USER MANUAL
SLOW JUICER
GSJ-600 GSJ-610 GSJ-620
SPECIFICATION
– power: 200W
– nominal voltage: 230V ~ 0 Hz
– max continuous operating time: 20 minutes
– rotation speed: 4 - RPM
– BPA free
PRODUCTS FEATURES
1. Non-grinding j icing method feat red by slow sq eezing is
adopted for the product, so the natural flavor and nutrient elements of
fruits and vegetables are well retained. The product has multiple
functions, including making vegetable juice and fruit juice, etc.
2. The squeezing cup may be separated with the mainframe, and it is
convenient to clean.
3. Dual-switch design makes the product safer (make the squeezing cup
installed onto the mainframe; apply the front cover of squeezing body,
and then turn on the switch to make the juicer run).
SAFETY NOTES
Please caref lly read the man al before se the j icer, and
please se
the machine according to the instruction book. Be sure not to use the
product for other purposes.
1. Please do not make the machine share the same power supply with
other high-power electric appliances, and the product shall be used with
30A leakage circuit breaker installed.
2. To prevent electric leakage and other hazards, please use the machine
according to the instruction book.
3. It is forbidden to make the machine power line and plug immersed into
water or other liquids.
4. Be careful to watch it during operation of the machine.
5. If the parts or product structure is found to be damaged (particularly,
the safetyprotection device and power line are damaged), please do not
use the machine. Do not attempt to repair it by yourself, and it shall be
1
Warning: The prod ct is applicable to family se, and it is
inapplicable to commercial se, otherwise its service life may
be shortened. Don't se the nit if the filter damaged.
repaired by professionals.
6. Do not let children or the disabled operate the machine under the
condition that they have not received any guidance or supervision.
7. Please do not make the product used on or beside high-temperature
gas or electric stove.
8. It is forbidden to use finger, spoon or chopstick to push
fruits/vegetables into the feed inlet of the machine.
9. Please do not touch or move any moving part during operation of the
machine.
10. Please do not make metal sheet or other conducting material inserted
into the juicer, so as to prevent fire or short circuit.
11. Before the machine is cleaned, moved or it is not used, please pull
out the plug.
12. Be sure not to put the machine near inflammable goods.
13. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons inorder to
avoid accident.
14. Be sure to hold the plug with hands when the plug is pulled out, and
it is forbidden to pull the power line or touch the wire with wet hands.
15. Please be sure that the juicer is put on a firm plane before it is used.
16. Please be sure to pull out the power plug after the use.
17. Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
18. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
19. This appliance shall not be used by children. Keep the appliance and
its cord out of reach of children.
20. Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
21. Children shall not play with the appliance.
22. This appliance can be used by children and persons with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
2
ELEMENTS
Pict res are for reference only
3
RUBBER PAD INSTALLATION
1. Before the juice cup is installed, please confirm whether the rubber pad
of the marcoutlet at the bottom of the juice cup is properly installed.
Make the rubber pad of marc outlet inserted into the rectangular slot.
Make the rubber pad of marc outlet properly inserted.
Notes: The r bber pad m st be properly installed, otherwise
leakage phenomenonmay occ r.
2. Installation juice outlet stopper
The stopper is separately packed during the packaging process. use, make
the bayonet juice outlet align with the fixed column on juice outlet and
inserted. Before use make the bayonet juice outlet stopper align with the
fixed column on juice outlet and inserted.
3. Installation of marc outlet stopper
The stopper is separately packed during the packaging process. Before
use, make the aligning column on the fixing piece marc outlet stopper
align with the fixing groove on the outlet and inserted.
4
ASSEMBLY OF COMPLETE MACHINE
Step 6
Make the juice cup and marc cup
respectively installed to the juice
outlet of juice cup and the position
that is under the marc outlet.
Step
Make the feeding tube installedto the
squeezing cup.
See the figure, make the mark “^”
on the cover of squeezing cup and the
mark “^”on the squeezing cup
aligned and perform installation
downwards, and then rotate it at
clockwise direction.
Step 4
Make the filter installed into the
squeezing cup. See the figure. Make
the mark “^” on the juicing filter and
the mark “^” on the squeezing cup
aligned and perform installation
downwards.
Step 3
Make the auger installed
into the filter.
Make the hexagonal axis in the auger
align with the outer-hexagonal axis of
motor and perform installation
downwards, and then rotate it at clock
wise direction.
Step 2
Make the filter installed into the
washing rack.
Step 1
Make the squeezing cup installed
onto the main body. See the figure.
Make the trim strip on the squeezing
cup align with the trim strip on the
main bodyand perform installation
downwards, and then rotate it at
clockwise direction.
FUNCTION DESCRIPTION
No. Program Food recommendation
1 Hard 1. Suit hard vegetable and fruit, Carrot, Beet etc;
2. Cut fruit into 1. -2cm block or Length;
3. Put fruit to juicer slowly and ensure marc can go out smoothly ;
4.Touch button “ R” if unit is blocked during working;
2 Medium 1. Suit for not too hard fruit, such as Apple, Pear etc ;
3 Soft 1. Suit for soft fruit, such as Watermelon, grapes etc;
2. Put fruit to juicer slowly and ensure marc can go out smoothly ;
3. For soft fruit, they can not be squeezeed fully and marc will remain little juice;
4 Mixed Juice 1. It is better for soft fruit mix some hard fruit on this program;
2. During working, Juicer will stop seconds for the second fruit;
Vegetable 1. The program suit for vegatable juice;
2. Please use some hard and less fiber vegetable for juice;
3. For celery and other much fiber vegetable, please cut it about 2cm length;
4. Put vegetable to juicer slowly and ensure marc can go out smoothly;
6 Jam 1. This program suit for soft fruit such as: tomato, Strawberry;
2. Stem the Juice outlet by stopper;
3. Put fruit to juicer and squeez it about 3 mins, ensure juice less than
squeezing cup max scale mark;
4. Add some yogurt or honey according to taste, Clean juicer;
5. Jam f nction is only available in models GSJ-600 and GSJ-610;
7 Nuts milk 1. Nuts such as Soybean/ Peanut /almond must be soaked 8-12 hours;
2. Put soaked nuts and water to squeeze together;
3. Fully cook the juice and add milk or sugar according to taste;
8 Salad 1. This function is option, suit for carrot, cucumber, onion etc;
2. Need one set special accessories for Salad function;
3. The salad function can cut vegetable to strip or piece by 2 different knives;
4. Make salad according to need;
5. Salad f nction is only sef l in models GSJ-610 and GSJ-620 with
incl ded accesory. For model GSJ-600 salad accesorry is available
separately;
9 Washing 1. Before using this Slow Juicer, close the juice and Marc outlet stopper;
2. Pour some clean water to squeezing cup and touch “washing” button;
3. Open juice and marc outlet stopper and pour out water, continue making juice;
1. key: It is Power and stop key, After the power is pl gged in and the cover of j ice
1. key: It is power and stop key. After the power is plugged in and
the cover of juice cup is applied, the buzzer will beep and the power lamp
will flash to enter into standby status; click the 『power 』key for power on
6
and the power lamp will be normally on. At this time, the default menu is
『hard 』vegetable and fruit. when all lights are on and press the 『power 』
key, the machine will power off after seconds' reversal operation.
2. key: Click the 『menu 』key for switchover in circulation (from left to
right, from up to down).
3. key: Click the 『start 』key, and the selected menu operation will
start. The machine will pause if the 『start 』key is clicked at squeezing
status; and the machine will continue the work after the 『start 』key is
clicked again.
4. key: Click the 『R 』key, the machine works in backward rotary, and
the machine will pause after 10 seconds' reversal operation. (The 『R 』key
may be used at both pause or squeezing status).
Notes: If switch over to other men options nder sq eezing
stat s, please click the 『power』key firstly, and then click the
『men 』key. If all the display lamps flash and the b zzer beeps,
the machine will pa se and enter into protection stat s. The
machine will recover to the defa lt stat s by clicking any key.
The machine will stop a tomatically after r nning for 20min at
sq eezing stat s, Cool machine abo t 20 min tes and restart it
again if need.
USE METHOD
1. Use method of cover:
7
2. Juicing method:
(1) Use method of big- caliber feed port:
1. Push the cover-opening button leftwards
and the swiveling cover will bounce
automatically, and the feed port will appear.
2. At this time, the whole apple may be put
into the feed port, rotate and press the
swiveling cover until the apple enters into
the squeezing chamber.
3. The pushing rod may be used for
assistance during the squeezing process.
Notes:
1. The fr its and vegetables with the diameter of over 75 mm or
irreg lar shapes shall be p t into the machine after being c t
into small size, so as to prevent nsmooth feeding.
2. M ch fiber vegetable sho ld be c t to 2cm length.
(2) Use method of small feed port:
1. Make the swiveling cover rotated to
be horizontal, and then push the
cover-opening button rightwards to
lock the swiveling cover.
2. Make clean fruits and vegetables
(big-sized fruits and vegetables shall
be cut into proper size) put into the
feed port, and push them inwards by
using the pushing rod.
NOTES FOR USE
* Please read the following contents before use.
1 .The materials shall be put into the machine slowly one by one, and
new materials shall be put into it after the previous materials have
beensqueezed.
2. The materials with large fiber content (such as celery) shall be put into
the machine after being cut into the blocks with appropriate size (10-
20mm). (The materials with particularly strong fiber shall be put into
themachine slowly after being cut into the blocks of about 20mm).
8
3. When the carrot that have been stored at low temperature for over 1
week is used for squeezing, it is better to make it squeezed together with
the materials with large water content (such as pear or orange), because
that such carrot has small water content.
The juice amount will be larger if new materials are put into the machine
after the previous materials have been squeezed (the juice amount will
vary with thewater content of materials).
4. The juice amount will be small if the materials are not fresh. When dry
materials stored in refrigerator are used for squeezing, the materialsshall
be squeezed after being immersed in clear water for sufficient water
absorption, so that the effect will be better.
5. Hard materials are not applicable to make juice (such as kudzu, suga-
rcane, etc).
6. There will be certain friction noise when carrot (hard flesh) or
apple(hard peel) is used for squeezing, but this has no impact on the
product.
7. Juice will be splash from the feed inlet when such materials as cherries
tomatoes and grapes are used for squeezing.
DISASSEMBLY METHOD
1. Stop the machine and pull out the plug.
2. Grip the feeding tube by hands, and rotate the feeding tube - see
figure (1) clockwise direction to the position indicated on figure (2) and
then take out the feeding tube upwards.
9
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Gotie Spremiagrumi
