Govee H61A2 Manuale utente
Govee RGBIC LED Neon Rope Light
Model: H61A2
User Manual
English 01
Deutsch 08
Polski 15
Español 22
Italiano 29
日本語 36
01
Read and follow all the safety instructions:
●
●
●
●
●
●
●
●
●
●
Safety Instructions
Rated as IP67 Waterproof, this product can be used outdoors but
can not be immersed in water.
Use the product with the provided power adapter only.
Keep the product away from sharp objects or strong corrosive
chemicals.
Although this product has good bending performance, when
bending the neon rope light, please try not to x the buckle too
close and bend it too large, so as not to damage the light beads
and then aect the life span.
Do not install the neon rope light near any heat sources.
Do not allow children to install the neon rope light alone.
Avoid installing the neon rope light near potentially dangerous
sources (e.g., candles, liquid-lled objects).
Unroll the neon rope lights before powering them on.
In the case of only using adhesive to x the buckle, if you want to
get the maximum adhesion, it is suggested that you wait for a
period of time to install the neon rope light after xing the buckle.
It is recommended that this product should not be stuck to the
back of TV and display.
English
02
Thanks for choosing the Govee RGBIC LED Neon Rope Lights.This
product is equipped with a 5m RGBIC neon rope light and supports
app, voice (Alexa/Google Assistant). RGBIC is Govee's latest lighting
display technology. You can give free rein to your imagination and
create your own unique neon rope light curve.
Introduction
LED Neon Rope Lights
Adapter
User Manual
Service Card
1
1
1
1
What You Get
At a Glance
Turn the light on/o.
Press to cycle through 9 colors.
Press to enter music mode.
Press and hold to cycle through 6
brightness levels.
03
Installing Your Device
Unpack the box and check all items listed in the packing list.
Power on the neon rope light and check whether it lights up.
❶
❷
Before You Install
Installing Steps
❶Wipe the surface to make
sure it's clean and dry. ❷After tearing o the adhesive lm,
you can stick the buckle to the place
you want and press it rmly (if
necessary, you can reinforce the
buckle with a screw), and then clip
the neon rope light into the buckle.
Peel o the protective lm on
the control box and stick it
on.Place the control box close
to the music source to achieve
the best music eect.
❹Power on the neon rope
lights and start using.
❸
04
●
●
Pairing Your Device with the Govee
Home App
What You Need
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands.
5GHz is not supported.
A smartphone or tablet running iOS 8.0 (or above) or Android 4.3
(or above).
Pairing Instructions
❶
❷
❸
❹
Download the Govee Home app from the App Store (iOS devices)
or Google Play (Android devices).
Turn on Bluetooth on your smartphone.
Open the app, tap the“+”icon in the top right corner and search
for“H61A2”.
Tap the device icon and follow the on-screen instructions to
complete pairing.
Govee Home
05
Controlling the Device with Your Voice
❶
❷
❸
Open the app, then tap the device icon to enter detail page.
Tap the setting icon in the top right corner.
Select Using Guidance and follow on-screen instructions to control
the device using your voice.
Troubleshooting
❶The adhesive tape is not strong enough.
Specifications
Make sure the installation surface is clean and dry.
Firmly press over the strip after sticking.
Reinforce the installation via more clips and tape.
Length
Light Color
Water Resistance
Control Method
Power Supply
5m/16.4ft
RGBIC
IP67 (The adapter and the control
box are NOT waterproof.)
App, Control Box, Voice Control
Adapter 24V
06
Do not skip the Wi-Fi connecting steps in the app.
5GHz network is not supported. Please set the router to 2.4GHz and
then reset it.
Connect your phone to Wi-Fi and check whether the network works
well.
❺Cannot connect to Wi-Fi.
❷Cannot connect to Bluetooth.
Do not skip Bluetooth connection in the app.
Ensure Bluetooth on your smartphone has been turned on.
Your smartphone may be incompatible with the Govee Home
app. Try using a dierent smartphone then reconnect.
Power the neon rope lights and your smartphone Bluetooth o
then on, then try again.
Ensure that your smartphone is within 1m/3.28ft of the neon
rope lights when connecting.
Clear any obstructions that are between the neon rope lights
and your smartphone.
❹Cannot sync the neon rope lights to the beat of my music.
Move the control box closer to the music source.
Clean the mic on the control box then try again.
❸The neon rope lights does not display the full selected color/Some
LED beads do not light up.
Please contact the Govee support team for rapid product
replacement.
07
Make sure you have entered the correct Wi-Fi name and password.
Change your Wi-Fi password to a brief one. 8 numbers and letters are
suggested.
Connect hotspot in your phone to the neon rope lights and check
whether the router works with the neon rope lights.
❻Cannot connect to Alexa.
Pull out every connective part of the neon rope lights and rmly
re-connect them.
Re-connect your phone to Wi-Fi.
Plug out the adapter port and re-plug it in.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Ocial Website: www.govee.com
@Govee.smarthome@Goveeocial
@govee.ocial
@govee_ocial
@Govee
Sicherheitshinweise
Dieses Produkt ist als wasserdicht gemäß IP67 eingestuft und kann
im Freien verwendet werden, es darf jedoch nicht unter Wasser
getaucht werden.
Verwenden Sie das Produkt nur in Verbindung mit dem mitgeliefer-
ten Netzteil.
Halten Sie das Produkt von scharfen Gegenständen oder stark
ätzenden Chemikalien fern.
Obwohl dieses Produkt eine gute Biegeleistung aufweist, vermeiden
Sie beim Biegen des Neon-Lichtbands den Verschluss zu eng zu
befestigen und eine zu starke Biegung auszuführen damit die
Lichtkugeln nicht beschädigt werden. Befestigen Sie den Verschluss
nicht zu fest und biegen Sie nicht zu stark um die Lichtkugeln nicht
zu beschädigen und um deren Lebensdauer nicht zu beeinträchti-
gen.
Installieren Sie das Neon-Lichtband nicht in der Nähe von
Hitzequellen.
Erlauben Sie Kindern nicht, das Neon-Lichtband alleine zu
installieren.
Vermeiden Sie die Installation des Neon-Lichtbands nahe bei
potenziell gefährlichen Quellen (z. B. Kerzen, mit Flüssigkeit gefüllte
Gegenstände).
Rollen Sie das Neon-Lichtband ab, bevor Sie es einschalten.
Wenn Sie den Verschluss nur mit Klebsto befestigen und sie
maximale Klebehaftung erzielen möchten, wird empfohlen, nach der
Anbringung des Verschlusses eine Weile zu warten bevor Sie das
Neon-Lichtband installieren.
Es wird empfohlen, dieses Produkt nicht an der Rückseite eines
Fernsehgeräts oder eines Displays zu befestigen.
Deutsch
08
Lesen und befolgen Sie alle Sicherheitshinweise:
Indice
Lingue:
Altri manuali Govee Attrezzatura di illuminazione
Govee
Govee H6061 Manuale utente
Govee
Govee H613D Manuale utente
Govee
Govee H6179 Manuale utente
Govee
Govee H615A Manuale utente
Govee
Govee H6008 Manuale utente
Govee
Govee H618A Manuale utente
Govee
Govee H6199 Manuale utente
Govee
Govee H6056 Manuale utente
Govee
Govee H61E1 Manuale utente
Govee
Govee H617E Manuale utente
Govee
Govee H7040 Manuale utente
Govee
Govee H7050 Manuale utente
Govee
Govee H6062 Manuale utente
Govee
Govee H6154 Manuale utente
Govee
Govee H6130 Manuale utente
Govee
Govee H6199 Manuale utente
Govee
Govee H61C3 Manuale utente
Govee
Govee H6119 Manuale utente
Govee
Govee H614E Manuale utente
Govee
Govee H610B Manuale utente
