Govee H6071 Manuale utente
3. Cannot connect to Alexa or Google Assistant.
a. Ensure the Wi-Fi connection is stable and working properly.
b. Go to “User Guide” in the app settings page to pair the lamp again.
4. Can multiple users control one lamp?
a. Each lamp can only be controlled by one account.
b. If multiple users want to manage the same lamp, ensure they all use the same account.
FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
1.
2.
3.
4.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
la distance entre l'utilisation et l'appareil ne doit pas être inférieure à 20 cm.
This Class B digital apparatus complies with Canadian ICES-005.
Cet appareil numérique de la classe B est conforme à la norme NMB-005 du Canada.
la distance entre l'utilisation et l'appareil ne doit pas être inférieure à 20 cm.
This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device
should be replaced.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.
Govee is a trademark of Shenzhen Intellirocks Tech Co.,Ltd.
Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.
®
Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
Email: [email protected]
Contact information: https://www.govee.com/support
FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTÉRIEUR UNIQUEMENT
Safety Instructions
Introduction
What You Get
Read and follow all safety instructions in this manual.
Thanks for choosing Govee Smart LED Floor Lamp. This floor lamp has a slender, exquisite
shape, with a flexible gooseneck that can be bent in any direction to light all the spaces of
your home. Connect this lamp to the Govee Home app to control it remotely via Wi-Fi, and
bind with Alexa or Google Home for smart voice control to light up your life hands-free.
Lastly, multiple preset scene modes provide cozy environments at a tap of a finger for
reading or entertainment.
●This lamp is not waterproof. Avoid exposing it to splashing or dripping water.
●Operating temperature should be within-10° to 40°C (14° to 104°F).
●This lamp's internal light source cannot be replaced. If it breaks, you must replace the
entire lamp.
●Do not allow children to assemble the lamp by themselves.
●Avoid placing the lamp near heat sources.
●Avoid placing the lamp near potentially dangerous sources (e.g., candles, liquid-filled
objects, etc.).
Floor Lamp 1
1
1
1
Power Adapter
User Manual
Service Card
At a Glance
12
3
4
56
7
1. Lamp Head
2. Bendable Gooseneck
3. Control Box
4. Post
5. Base
6. Power Cable
7. Power Adapter
Control Box
On/Off Button
Brightness Dimmer
Color Temperature Switch
(Touch to change color temperature)
(Slide to adjust brightness)
(Touch to power On/Off)
Installing Your Device
Installing Steps
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
1.Download the Govee Home app from the App Store (iOS devices) or Google Play
(Android devices).
Pairing Your Lamp with the Govee Home App
What You Need:
1.Assemble this floor lamp by following the provided instructions.
2.Power on the adpater.
Specifications
Troubleshooting
2.Enable Bluetooth on your smartphone.
3.Open the app, tap the “+” icon in the top right corner, and search “H6071”.
4.Tap the device icon and follow the onscreen instructions to complete pairing.
-10° to 40°C /14° to 104°F
Model H6071
AC 100-240V
12V 1A
700lm
CW/WW
2200K-6500K
Touch Control, App, Voice Control,
Adapter Input
Lamp Input
Lumens
Colors
Color Temperature
Control Method
Operating Temperature
1. Cannot connect to the Govee Home app.
a. Check if the lamp is powered on.
b. Check if Bluetooth on the smartphone is enabled, or try connecting with another
smartphone.
c. When connecting for the first time, ensure the smartphone is near the lamp.
d. If the connection error still exists, please delete the connected device from “My Device”
on the app. Reconnect to the Govee Home app by following the instructions provided
previously.
2. Wi-Fi disconnects or fails to connect.
a. Check that the lamp is powered on.
b. Do not skip the Wi-Fi connection steps during the device pairing process.
c. Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
d. Ensure you have entered the correct Wi-Fi password during the Wi-Fi setup process.
e. Try using another smartphone to pair with the lamp to ensure your network is working
properly.
f. Shorten the distance between the lamp and the Wi-Fi router to less than 50 inches,
then reconnect.
Altri manuali Govee Luce da lavoro
