SAFETY
Our compliments for your excellent choice. Your new
electromechanical gear motor has been produced according to a high
quality and a strict reliability, that's why it will assure you long-lasting
performances.
This booklet will offer you all the pieces of information you may need to
install your gear motor and to safeguard your safety.
However, the caut on s unquest onably nd spensable and
noth ng s better than prevent ng acc dents.
ll our products have been made in conformity with the regulations in
force.
WARNING: any repair or adjustment of the working machinery is
strictly prohibited unless all the necessary precautions (electrical
supply disconnected and motor off) have been taken in order to avoid
possible accidents.
WARNING: any repair must be carried out by qualified people.
ll moving mechanisms must be provided with suitable protections.
WARNING: Keep the automatic controls out of the reach of childrens.
The controls must be installed at a minimum high of 1,5 mt. from the
ground surface and out of the work of mobile parts.
WARNING: command pulses must be given from positions where the
gate is visible.
WARNING: use the transmitters only if you can see the gate.
WARNING: GR Srl is not responsible for possible damages or injuries
to people, objects or animals, caused by any unauthorised modification
of the product.
Keep scrupulously this booklet in a suitable place well known by all the
interested people.
In order to make the automation work efficiently; the gate to automate
must have the following characteristics:
- it must be balanced;
- it must oscillate fluently;
- you have to carry out the manual closing and opening the gate
without any effort;
- remember that the motorization has been planned in order to help you
use the gate. This means that it does not resolve the problems caused
by an inadequate installation or by a poor upkeep of the gate.
SAFETY RULES
During the installation and the use of the automation, you have to pay
attention to the following safety rules:
- Security distance!
- Mechanism in movement!
- Do not install the automation in places with presence of iniammable
gasses!
- Electric shock!
- Use the gloves!
- Use glasses for welding!
- Keep the protection carter!
EQUIPMENT
In order to install the automation you have to provide yourself with
keys, screwdriver, metre, slope detector (water level), saw, drilling
machine and welding machine.
