Gram SBZ-600 Manuale utente

USER MANUAL

MANUAL DE UTILIZACION

MANUEL D´UTILISATION

SERIES / SERIE / SÉRIE SBZ

Models / Modelos / Modèles:

SBZ-600

SBZ-1500

SBZ-5000S

SBZ-6000

SBZ-10

SBZ-10 S

SBZ-10 SB

SBZ-20

REV. 1A13M063T

INDEX

Power 5

Keys function 5

Standard cali ration 6

- Weight cali ration 6

- Zero cali ration 6

- Span cali ration 6

Functions setting 7

- Internal value 7

- Weight limits 7

- Auto-turn off 7

- Backlight 8

- Hold function 8

- Zero configuration 8

- Gravity value setup 9

Guarantee 9

EC Declaration of Conformity 20

INDICE

Alimentación 10

Función de las teclas 10

Cali ración standard 11

- Cali ración de peso 11

- Cali ración del cero 11

- Cali ración del span 11

Configuración de funciones 12

- Valor interno 12

- Límites de peso 12

- Autodesconexión 12

- Iluminación interna del display 12

- Función Hold 13

- Configuración del cero 13

- Configuración de la gravedad 14

Garantía 14

Declaración de Conformidad CE 20

SOMMAIRE

Alimentation 15

Functions des touches 15

Cali ration standard 16

- Cali ration de poids 16

- Cali ration du zero 16

- Cali ration du span 16

Configuration de functions 17

- Valeur interne 17

- Limites de poids 17

- Autodéconnection 17

- Éclairage de l´écran 17

- Fonction Hold 18

- Configuration du zero 18

- Pré-cali ration gravitacionnelle 19

Garantie 19

Declaration CE de Conformité 20

POWER

Input: AC 120

240

Output: DC 12V/1A

Rechargea le attery: 6

4AH

(Optional)

POWER CONSUMPTION

with acklight.

Battery hour per charge: approx.l 320 hours ( acklight off)

EYS FUNCTION

To turn off the alance, keep pressed this key until display shows “Off” for

2 seconds.

Press this key to turn on the alance.

Function 1. To select the desired weight unit.

Function 2. To exit from setup mode.

Function 1. To reset the weight to zero “0”, ut the display value has to e

lesser than

2% of maximum capacity.

Function 2. To move one space to the left or downward in setup mode.

Function 1. To su tract the container´s weight.

Function 2. To move one space to the right or upward in setup mode.

Function 1. To view gross or net weight when the alance is on tare status.

All other keys will e disa led when gross weight is activated.

Function 2. To increase values upward in setup mode.

Function 1. Key of confirmation in setup mode.

STANDARD CALIBRATION

Press the and key at the same time to access to standard cali ration.

ECF-1 Weight cali ration (Zero and Span)

ECF-2 Zero cali ration

ECF-3 Span cali ration

Weight calibration ECF-1

1. Press the key to access to mode ECF-1 or press the key to exit and

return to normal weighing mode.

2. The display will show CALZ, press the key.

3. Use the keys ◄, ►, ▲, 0 ~ 9 to introduce the cali ration weight value and confirm

pressing the

4. Place the cali ration weight on the platter and press the key.

5. The alance will automatically cali rate and return to normal weighing mode.

Zero calibration ECF-2

1. Press the key to access to mode ECF-2 or press the key to exit and

return to normal weighing mode.

2. The display will show CALZ, press the key.

3. The alance will automatically perform zero cali ration and return to normal

weighing mode.

Span calibration ECF-3

1. Press the key to access to mode ECF-3 or press the key to exit and

return to normal weighing mode.

2. Use the keys ◄, ►, ▲, 0 ~ 9 to introduce the cali ration weight value and confirm

pressing the

4. Place the cali ration weight on the platter and press the key.

5. The alance will automatically perform span cali ration and return to normal

weighing mode.

FUNCTIONS SETTING

To access to functions setting, press the and key.

UF-1 Internal value / display voltage

1. Press the key to view the internal value.

2. Press again the key to view the attery voltage.

3. To exit and return to normal weighing press the key.

UF-2 Weight limits

1. Press the key to access to weight limits configuration.

2. The display will show the message “0000.0L”

3. Use the keys and to introduce the low limit value, with key to

increase the digit value.

4. Press the key to confirm.

5. The display will show “0000.0H”

6. Use the keys and to introduce the high limit value, with key

7. Press the key to confirm.

UF-3 Auto-turn off

Modes:

-AoFF 00 – Auto-turn off disa le.

-AoFF 01 – The alance will automatically turn off after 1 minute of non use.

The auto-turn off can e configurated up to 99 minutes AoFF01~AoFF99, the default

value is AoFF10 (10 minutes)

1. Press the key to access to auto-turn off configuration.

2. Use the keys and to move from one digit to other and the key

to select the desired mode.

3. Press the key to confirm.

UF-4 Backlight

Modes:

-Lit Off: Disa le.

-Lit A: Automatic

-Lit on: Always activated.

Default value: Lit A (automatic)

1. Press the to access to acklight configuration.

2. Use the key to select the desired mode.

3. Press the key to confirm.

UF-5 HOLD function (keeps the reading fixed on display for few seconds after

removing the load from the platter)

Modes:

-HOLD 0 : Disa le.

-HOLD 1 : Weighing animals mode.

-PCtXXX: To configurate the range from 001~100 in HOLD 1 mode.

-timEXX: To configurate the time from 1 2 4 8 16 32 64 in HOLD 1 mode

Default value: HOLD 0

1. Press the key to access to HOLD function configuration.

2. Use the key to select the desired mode.

3. Press the key to confirm.

UF-8 Zero configuration

ZP 0 Disa le function.

ZP 1 1 division not displayed

ZP 2 2 divisions not displayed

ZP 3 3 divisions not displayed

ZP 4 4 divisions not displayed

ZP 5 5 divisions not displayed

•This function is locked if HOLD 1 function is activated.

Default value: ZP 0

1. Press the key to access to configuration.

2. Use the key to select the desired mode.

3. Press the key to confirm.

UF-9 Gravity Value setup

Although the alance allows the Standard Cali ration, the G value setup provides a

greater accuracy. This pre-cali ration is performed with the switch CAL in ADJ

position. The value will e set to -00- and it will e replaced each time you enter a new

value.

Gravity value of Distri utor: configurated efore the weight cali ration.

Gravity value of User: configurated after the weight cali ration.

The value of gravity will e denied if is greater than 9.83217 (Polar Gravity) or less

than 9.78031 (Ecuador Gravity)

Default value: 9.79423

1. Press the key to access to configuration.

2. The display will show the last value for 1 second.

3. Use the keys and to move from a digit to other and the key to increase

the digit value.

4. Press the key to confirm

GUARANTEE

This scale is guaranteed for one year from the delivery date. The guarantee covers any

fa rication defect of the material.

During this period GRAM PRECISION, covers the manpower and the spare parts necessary for

the reparation of the scale.

This guarantee does not cover the failures caused y an inappropriate use or overcharge.

The guarantee does not cover the freight cost (transport) necessary to repair the scale.

ALIMENTACION

Entrada: AC120

240

Salida: DC 12

Batería recarga le: 6

4AH

(opcional)

CONSUMO

con la iluminación interna del display

DURACION DE LA BATERIA

320

horas

, con la iluminación del display desactivada

FUNCION DE LAS TECLAS

Para apagar la alanza, mantener pulsada la tecla OFF hasta que el

display visualice “Off” durante 2 segundos.

Pulsar esta tecla para conectar la alanza.

Función 1. Para seleccionar la unidad de pesada deseada.

Función 2. Para salir del modo programación.

Función 1. Para poner a cero la lectura del display, siempre y cuando el

valor del peso sea menor al

2% de la capacidad máxima.

Función 2. Para desplazarse hacía la izquierda ó hacía a ajo dentro del

modo de programación.

Función 1. Para sustraer el peso de un recipiente u o jeto.

Función 2. Para desplazarse hacía la derecha ó hacía arri a dentro del

modo de programación.

Función 1. Para visualizar el peso ruto ó neto tras efectuar una Tara.

Cuando el display muestra el peso ruto, las demás teclas

quedan inactivas.

Función 2. Para incrementar los valores introducidos en el modo

programación.

Función 1. Tecla de confirmación en la programación de parámetros.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente