GrandTec Grand Manuale utente

The information in this document is subject to change without notice.

Grand IP Media Player

This document contains materials protected by copyright. All rights are

reserved. No part of this manual may be reproduced or transmitted in any

form, by any means or for purpose without express written consent.

(Network Digital Media Player)

CE DECLARATION

This device complies with CE class B.

* EN55024 EN61000-4-5

EN55022 EN61000-4-2 EN61000-4-6

EN61000-3-2 EN61000-4-3 EN61000-4-8

EN61000-3-3 EN61000-4-4 EN61000-4-11

User’s Manual

Printed in Taiwan R.O.C.

All contents are subject to change without notice.

All trademarks are the property of their respective owner.

Table of the Contents CHAPTER 1

Chapter 1 Welcome to Grand IP Media Player 4

1.1 Introduction 4

1.2 Product Features 4

1.3 System Requirements 5

1.4 Package Contents 5

Chapter 2 Hardware Installation and Operation Guide 6

2.1 Connectors 6

2.2 Panel buttons and switch 7

2.3 Remote Controller button function 8

2.4 Installation for IBM PC 9

Chapter 3 Display on TV LCD TV or VGA Monitor 10

Chapter 4 Network Installation and Operation Guide 14

4.1 First time to login IP Media Player 14

4.2 Quick setup in the Router (DMZ function setup) 18

4.3 More than 1 IP media players under the router 20

4.4 Limitation of FTP Protocol 23

4.5 How to Connect to ADSL 27

4.6 How to Upload and Play Media 30

Chapter 5 TROUBLESHOOTING 33

Welcome to Grand IP Media Player

Issue:04/12/2006

Version: A

P/N: 34398000

1.1 Introduction

Grand IP Media Player is network storage player that provides all kinds of

network connection, such as:10/100M Ethernet, fixed IP address, ADSL

PPPoE, Dynamic IP(DDNS).You can upload your favorite multi-media

(picture,MPEG1,MPEG 2,MP3,AVI files)to the CF card from all over the

world. All you have to do is just typing the IP address through Internet

Explorer and remote control the media storage to display multi-media files

on TV.

1.4 Package Contents

1.2 Product Features

1.Grand IP Media Player

2.Remote Controller

1.Remote control media Player through the IE Browser

2.Embedded FTP Server:Upload, delete, download, rename Media Files

under the CF card. 3.Audio cable

4.S-Video cable

3.Support many Network services : HTTP (User Interface) , FTP (File

Management) , PPPoE ( Fixed IPAddress is recommended ) ,

Dynamic DNS , and firewall port forwarding (used in virtual IP address)

5.RJ-45 Cable (Cross over wire)

6.Power Adapter DC 5V/2A (-) Å(●Æ(+)

7.CD Driver

4.Supports multiple file formats: JPEG, MJPEG (AVI), MPEG I/II, MP3. 8.Quick Start

and AVI. 9.YPbPr Cable (Optional)

5.Supports CF Type I/II memory card. 10.Video +Audio SCART cable for EU only (TV with SCART input)

6.Video output Format: Video, S-Video, YCbCr, YPbPr, and VGA.

7.Supports NTSC and PAL by switch.

8.Supports SLIDE SHOW (13 kinds EFFECT): with sequential and

random.

9.Supports SLIDE TIME (INTERVAL) mode: interval time with 1,3,

5,10,30, 60 seconds and manual selection.

10.Supports MUSIC SLIDE show : MP3 with JPEG pictures play at the

same time.

11.Supports ZOOM IN (ON) 4x & PAN, ROTATE, MIRROR, PREVIEW,

REPEAT.

12.Includes Full functions Infrared remote Control.

1.3 System Requirements

1.TV, PDP, PROJECTOR, MONITOR with AV, SVideo, YCbCr, YPbPr and

VGA input.

2.Router ( with DDNS or PPPoE function ) is required

3.10Base-T Ethernet or 100Base TX Fast Ethernet

4.Windows 98SE/ME/2000/XP

5.Intel Pentium3 800GHz, AMD 800 GHz or Faster

6.64M RAM or above

7.VGA card with 8 MB Memory or above

8.Microsoft DirectX 9

YpbPr/YCbCr Output with YPbPr cable ( Cable is Optional )

CHAPTER 2 Compact Flash I/II sockets : Insert cards into the sockets and support CF

I/II.

Hardware Installation and Operation Guide Default :Press this button more than 10 seconds to return to the default

value.

2.2 Panel buttons and switch

IR SENSOR : Infrared input of remote controller.

POWER LED : LED will light, when power on.

POWER ON/OFF switch : Toggle between power on or off.

NTSC/PAL switch : Selects NTSC or PAL video system.

Stop button : press this button during a slide show, audio or video display

will be stopped.

Play/Pause button : press this button to display a photo, play an audio or

video file, and press this button again to pause.

Up/Doen/Left/Right button : Press UP, Down, Left and Right to select

item.

Fig.1 Outline of IP Media Player

2.1 Connectors

DC IN : Plug with power adapter DC 5V/2A (-) Å(●Æ(+).

RJ-45 : Connects RJ-45 cable to your router.

AUDIO OUT : Stereo audio signal output, connect to (amplified) speaker.

VIDEO OUT :Connects to video in of TV or projector.

S-VIDEO OUT : Connects to S-VIDEO in of TV or projector.

VGA/COMPONENT OUT : Connects to VGA/ COMPONENT in of Monitor,

projector or Plasma Display Panel.

2.3 Remote Controller button function

POWER : Toggle between power on or off.

MUTE : Mute the Audio output.

SETUP : Press this button to setup settings.

CARD SELECTION : Not used in this product.

EDIT : Delete, Properties, Rename function

VOLUME/+ : Volume up.

VOLUME/– : Volume down.

UP/DOWN/LEFT/RIGHT : Move up, down, left or right

when selecting on your TV screen.

ENTER : confirm selections on your TV screen.

PgUP : go to the previous page or image.

PgDo : go to the next page or image.

MUSIC : Go to and display all music files.

PHOTO : Go to and display all photo files.

MOVIE : Go to and display all movie files.

FILE : Go to file library (all files).

STOP : Stop the selected file or playback.

PAUSE : pause the playback.

PLAY : play the selected file.

REPEAT : Play file repeatedly until stopped.

REW : Rewind movies.

FF : Forward movies.

PREW : Go to previous file.

NEXT : Go to next file.

S-TIME : Slide show time adjustment 1; 3; 5,10, 30,

60 seconds.

S-MODE : Change slideshow effect with sequential,

random auto slide shows etc 13 kind of

selections.

S-MUSIC : The music slide show function allows you

to play MP3 audio files while a picture

slide show is being displayed.

ROTATE : Rotate photo 90 degrees clockwise on

screen.

ZOOM : zoom in (on) the image up to 4x.

MIRROR : When viewing images, you can use this

button to mirror the image horizontally.

OUTPUT MODE : selection video, s-video, YCbCr,

YPbPr and VGA output..

CHAPTER 3

Display on TV LCD TV or VGA Monitor

1.IP Media Player is Plug and Play. Easy to use with remote control.

2.After you turn on the power ,the following picture are appeared.

Fig. 4 Folder display Fig.5 Root display

3.IP Media Player Setting setup reference.

PHOTO SETUP : This screen lets you change the following settings.

THUMBNAIL DIGEST: These thumbnails load faster

and allow you to browse photos more easily .

MUSIC SETUP : This screen lets you change the following settings.

REPEAT MODE : ONE–Repeats the selected song.

ALL–Repeats all the songs on the memory card.

OFF–Do not repeat any song.

SLIDESHOW SETUP : This screen lets you change the following settings. DEFAULTS : Reset all settings to the original (factory) settings.

SLIDESHOW MODE : Set the slideshow starts automatically or not. FIRMWARE : F/W can upgrade the New F/W from Memory Card.

FOLDER REPEAT: Set all photos are shown once or continuously (loop). EDITION : Can show the F/W versions.

NTERVAL TIME : Set the time each photo is shown. 1, 3,5, 10, 30, 60

seconds. UPDATE : F/W can upgraded by memory cards.

TRANSITION (EFFECT) : Set the transition mode between slides and with

sequential, random auto shows etc 13 kind of

selections.

AUTO START : When turned on, any media

on the memory card plays automatically when the card is

inserted.

MOVIE SETUP : This screen lets you change the following settings.

INTERVALTIME :FAST–A short preview of movie plays in Thumbnail

view.

NORMAL : The whole movie plays in Thumbnail view.

REPEAT MODE : OFF–REPEAT MODE is turned off.

ONE : Plays the selected movie continuously (loop).

ALL : Plays all movies on the memory card continuously (loop).

PREFERENCES : This screen lets you change the following settings.

OSD LANG : Choose the language for the OSD: ENGLISH, CHINESE,

FRENCH, GERMAN, ITALIAN, JAPANESE, PORTUGUESE and SPANISH.

4.Preview mode of Photo picture.

5.Photo Pan function:

Photo can be moved while zoom function mode.

6.Photo Rotation: CHAPTER 4

Photo can be rotated 90 degrees in one time.

f.Properties : display the File Name, File Size, Picture Mode, Resolution

and File created date.

7.Edit Functions:

a.Select the FILE mode( FILE LIBRARY ).

Network Installation and Operation Guide

4.1 First time to login IP Media Player

1.Execute the program in the CD, and remember to select the Unblock

( Windows XP SP2 only )

VIDEO

MUSIC

FILE

SLIDE

b.Press the EDIT key of remote control to execute the delete, New Folder,

Rename and Properties.

c.DELETE : Enter to File Library and directly selected file that you want

to delete. There will be another confirmation will be

displayed and if you are sure, Please press YES. Other

wise press NO.

d.Rename function is only for file not for folder. Select the file and press 2.“http://192.168.1.100/” has been listed in the left side, and Double

click“…http://192.168.1.100/” to login the IP Controller

RENAME bar then key in new name and press STOP.

e.NEW FOLDER : Press the NEW FOLDER bar and key in the Folder

Name and press STOP.

If you can not connect to the Address: 192.168.1.100,please refer to

step3~step6.

3.Click Start->All Programs->Accessories->Command Prompt

4.Type the command “ipconfig” to get the network information

5.Then you can assign IPAddress, Net mask (Subnet Mask) and

default Gateway for the IP Controller

6.You must use the same Subnet Mask” 255.255.255.0 “and Gateway

”192.168.2.254”

7.You can use any IP Address between 192.168.2.1-254, but please

make sure that the IPAddress has never been used or is used by

any other IP addressable device.

8.For example: type the following parameters and click “setting”

Default IPAddress:http://192.168.1.100/

Default User ID: root

Default User Password: admin

First time to setup the Network, please remember reboot the system

4.2 Quick setup in the Router (DMZ function setup)

If your network Architecture likes the following figure,

You will need to setup the router, there are two methods:

Method 1: Assign the DMZ function to the IP Media Player. 4.3 More than 1 IP media players under the router:

Method 2: Assign the Port Number to the IP Media Player.

The

default HTTP Port Number is 80

The default FTP Port Number is 21

1.In this Page http://192.168.1.100/Simple/users.htm (IP Media Player1) ,

please assign two different port numbers for the FTP and Http Protocols

( for example FTP:7777,HTTP:6666)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GrandTec Lettore multimediale

GrandTec

GrandTec Grand Vision Talk 7 Manuale utente

Manuali Lettore multimediale popolari di altre marche

Visual Land

Visual Land Impulse Manuale utente

limHD

limHD 200i Manuale utente

Transcend

Transcend DMP10 Manuale utente

Philips

Philips GoGear Muse SA2MUS08 Manuale utente

Fantec

Fantec MM-HDRL Manuale utente

Dune HD

Dune HD Duo 4K Manuale utente

IAdea

IAdea HMP-505S Manuale utente

Camos

Camos MMS-1000 Manuale utente

Energy

Energy 75 Series Manuale utente

Z3 Technology

Z3 Technology DME-03 Manuale utente

Sony

Sony SVR-2000 Guida utente

Meicheng

Meicheng HD-1080K12 Manuale utente

DENAFRIPS

DENAFRIPS ARCE Manuale utente

Topaz

Topaz CMS Media Player Istruzioni per l’uso

InFocus

InFocus LightCast Manuale utente

IconBiT

IconBiT XDS1003D Manuale utente

Quanmax

Quanmax QDSP-2090 Series Manuale utente

Samsung

Samsung MP-80S Manuale utente