Safety Instructions
● Please keep this User Manual for future consultation. If you sell the unit
to another user, be sure that they also receive this instruction booklet.
● Always make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the
decal or rear panel of the fixture.
● This product is intended for indoor use only! To prevent risk of fire or
shock, do not expose fixture to rain or moisture.
● Make sure there are no flammable materials close to the unit while
operating.
● The unit must be installed in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
● Always disconnect from power source before servicing or replacing fuse
and be sure to replace with same fuse source.
● Secure fixture to fastening device using a safety chain.
● Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate
fixture at temperatures higher than this.
● In the event of a serious operating problem, stop using the unit
immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled
people can lead to damage or malfunction. Please contact the nearest
This paragraph contains critical installation, configuration or
operation information. Failure to comply with this
information may render the fixture partially or completely
inoperative, cause damage to the fixture or cause harm to
the user.
This paragraph contains important installation or
configuration information. Failure to comply with this
information may prevent the fixture from functioning
correctly.
