Green Technik CIP 1300 Manuale

Rev. 01/03

1300

www.green-technik.com

[email protected]

By: GREEN-PRODUZIONE s.r.l.

Via Mons. Vigolungo, 2 - 12040 VEZZA D'ALBA -

AZIENDA CON SISTEMA QUALITÀ

CERTIFICATO

==UNI EN ISO 9001/2008

PROFESSIONAL

CHIPPER

OPERATION AND

MAINTENANCE HANDBOOK

CAUTION !

Befor using the machine, carefully read this Handbook!

CIP1300 – Use and Maintenance Manual 1

INSTRUCTION MANUAL CONTENTS

CHAPTER PAR. DESCRIPTION PAGE

01 Information 3

1.1 Preamble 3

1.2 Main warnings 4

02 General information 6

2.1 Introduction 6

2.2 Regulatory references 6

2.3 Purpose of the document 6

2.4 Use of the manual 7

2.5 Compliance with legislation 7

2.6 Keeping the manual 7

2.7 Information for the User 8

03 Technical description of the machine 9

04 Basic parts of the machine and their

positions 10

05 Safety guards and protection devices 11

06 Residual risks concerning the machine 12

6.1 Considerations regarding safety

conditions and residual risks 12

07 Transporting the machine 14

08 Checks 15

09 Starting the machine 16

10 Using the machine 17

10.1 Positioning the discharge conveyor 17

10.2 Control bar 18

10.3 Clogging of the discharge mouth 21

CIP 1300 – Use and Maintenance Manual 2

11 Ordinary maintenance 22

11.1 Adjusting the rotation speed of the rollers 22

11.2 Immobilising the flywheel for maintenance

operations 23

11.3 Adjusting the blades and the counter-

blade 24

11.4 Replacing the blades 25

11.5 Replacing the counter-blade 26

11.6 Sharpening the blades and the counter-

blade 26

11.7 Maintenance of the spark ignition engine 27

11.8 Checking and replacing the hydraulic oil 27

11.9 Replacing the hydraulic filter 27

11.10 Lubricating the flywheel supports 28

11.11 Lubricating the mobile roller running

guides 28

11.12 Lubricating the coupling collar of the

discharge conveyor 28

11.13 Checking and replacing the multiplier oil (PTO

version) 28

11.14 Checking the tension of / Replacing the

transmission belt (Tractor PTO version) 29

11.15 Checking the tension/Replacement of the

transmission belt (motorised version) 30

12 No-Stress Device 31

12.1 Adjustment of the No-stress device

(optional) 31

13 Malfunctions 32

13.1 Possible malfunctions

Causes and solutions 32

14 Pictographs and symbols 33

14.1 Pictographs and symbols 33

15 Electrical system 34

15.1 No-Stress device electrical system (on

request) 34

16 Identification plate of the machine 35

17 Demolition of the machine 36

18 Warranty 37

Warranty slip 38

CIP1300 – Use and Maintenance Manual 3

Chapter 1 INFORMATION

GENERAL INFORMATION CONCERNING THE USE AND

MAINTENANCE MANUAL OF THE CIP1300 CHIPPER

1.1 Preamble

“CAUTION”: This term is used to identify eventualities that can

compromise the integrity of the machine.

These are shown in italics.

“WARNING”: This term, on the hand, is used to identify eventualities

that can compromise the safety of the operator.

These are shown in italics and in some case in bold.

N.B. In all the chapters of this Instruction Manual, the location of the

accessories and the various parts of the machine is always given as in

the diagram shown below.

LEFT SIDE

RIGHT SIDE

BAC

FRONT

CIP 1300 – Use and Maintenance Manual 4

Chapter 1 INFORMATION

1.2 Main warnings

The protection guards have been put in place by the

manufacturer to protect the safety of the operator.

During operation the protection guards must not be

removed for any reason..

It is extremely important that no one passes through the

work area of the machine except the operator. The

operator must in no case climb onto the structure of the

machine.

All the maintenance, adjustment and replacement

operations described in this Manual must only be carried

out after stopping the machine.

During blade removal, adjustment and replacement

operations, the operator must wear protective gloves to

avoid possible accidents.

(The manufacturer of the machine supplies a pair)

While processing is being carried out the operator is

required to wear anti-noise muffs given the high noise

level of the production cycle (the sound pressure level

measured at a distance of 1 m exceeds 80 dB).

During processing the operator must wear a pair of

glasses to protect the eyes from sawdust from the

processing.

CIP1300 – Use and Maintenance Manual 5

Chapter 1 INFORMATION

Do not throw away residual hydraulic oil, but dispose of it

in accordance with regulations in force.

Do not, for any reason, interfere with the hydraulic system

of the machine, in particular with reference to regulation of

the oil pressure which is set by the Manufacturer and will

never require further action.

The manufacturer has placed on the machine various

pictographs and symbols, in conformity to current

legislation, so as to warn the operator about residual risks

during operation.

While moving the machine in its travel position, there is

the risk of it overturning.

You must therefore check beforehand the slopes and

unevenness of the route to be taken before attempting to

move the machine.

The path taken must not have a gradient greater than 5%.

Do not allow persons not authorised and not assigned to

the work to have access to the controls of the machine.

It is extremely important that no one passes through the

work area. Any persons not connected with the operation

must not pass through or be in the area of the machine’s

movement.

The machine must only be used by one person at a time.

CIP 1300 – Use and Maintenance Manual 6

Chapter 2 INFORMATION

GENERAL INFORMATION CONCERNING THE INSTRUCTION MANUAL

2.1 Introduction

This Manual is a useful aid to knowing your machine and using it correctly: so you

need to read the Manual carefully before using it.

Every machine is sold together with its own INSTRUCTION MANUAL.

The User is responsible for looking after this Manual for the whole life of the machine

and will see to its destruction only when the machine itself is dismantled.

The Green Produzione. firm will not be answerable for any tampering with this

Manual or for any changes made to the User’s machine, after delivery, and not

provided for in this document.

The Manufacturer reserves the intellectual property rights of this Manual and forbids

its distribution, in whole or in part, in any form (print, photocopy, microfilm, or other

means) and also its elaboration, reproduction or distribution via systems, or legal or

physical persons, without its approval and recording.

2.2 Regulatory references

When putting together the Manual, indications contained in the following documents

have been used:

Directive 2006/42/CE, Appendix and modifications

UNI EN ISO 12100-1 – Safety of machinery: Terminology

UNI EN ISO 12100-2 – Safety of machinery: Technical specifications and

principles

2.3 Purpose of the document

The purpose of the Manual is to provide the User with the instructions and

information that should be scrupulously followed for correct use of the machine and

for protecting the safety of the operator called upon to interact with it.

For this reason the User is invited to:

Make this document available in the workplace and make it known and show it to

all the operators.

Pass on the Manual to later owners of the machine.

CIP1300 – Use and Maintenance Manual 7

Chapter 2 INFORMATION

2.4 Use and conservation of the Manual

This Manual is intended for the User of the machine, those in charge of the moving,

installation, use, supervision and final dismantling of the machine.

The purpose of the Manual is to indicate the intended use for which the machine was

designed and its technical features; it provides instructions for moving it, its proper

and safe installation, its assembly, adjustment and use; it provides information for

carrying out maintenance operations, facilitates the ordering of spare parts and

provides indications concerning possible residual risks.

In particular, it must always be possible to consult it for the following information:

Intended conditions of use of the machine;

The work position occupied by the operator;

Instructions relating to:

Putting the machine into operation, its use, transportation, installation, assembly

and disassembly, adjustment, maintenance and repair work, and any training

instructions there may be.

2.5 Complying with legislation

As well as the rules of this Manual, specific legislative provisions in the field of

accidents at work must be followed.

2.6 Keeping the Manual

The Manual is considered an integral part of the machine and must be kept in good

condition until final disposal of the machine.

The Manual must be kept in a protected place, dry, and sheltered from the sun’s

rays, and must always be easy to find and available for consultation, near the

machine.

CIP 1300 – Use and Maintenance Manual 8

Chapter 2 INFORMATION

2.7 Information for the User

1 - This manual reflects the current technical state of the machine and cannot be

considered inadequate simply because it is later updated on the basis of new

experience.

2 - The Manufacturer reserves the right to update production and manuals, without

being obliged to update previous production and manuals.

3 - The characteristics of materials can be changed at any moment, in accordance

with technical developments, without prior notice.

4 - Where the machine is without an electric control and protection device (on board

electric panel) , the Manufacturer does not assume any responsibility concerning

safety problems deriving from electrical parts not conforming to what is advised

and/or laid down.

In any case compliance with all electricity related Laws and Regulations for

equipment the machine is fitted with shall be exclusively the responsibility of the

Customer, who shall install it to the required standard and fit for the purpose for

which it is to be used.

5 - The Manufacturer considers itself relieved of any responsibility where the machine

has been put to:

Qimproper use;

Quse by untrained staff;

Quse contrary to what is set out in this Manual;

Quse contrary to Regulations and Legislation currently in force;

Quse with a mains power supply defect;

Quse with serious lack of specified maintenance;

Quse with modifications or work carried out not explicitly authorised by a written

note from the Manufacturer;

Quse of non-original spare parts or spare parts not specifically defined for the

model;

Quse with total or partial failure to observe the instructions contained in this

Manual.

6 - The general sales warranty is void in case of:

Qpoor conservation;

Qmishaps through incorrect use;

Quse by inexperienced personnel;

Qexceeding performance limits;

Qexcessive mechanical and/or electrical and hydraulic stress

Quse under the non-optimal conditions described in point 5.

Any requests for further copies of this document must be formalised with a purchase

order forwarded to Green Produzione.

CIP1300 – Use and Maintenance Manual 9

Chapter 3

TECHNICAL DESCRIPTION OF THE MACHINE

The CIP 1300 chipper has been designed for the reduction in volume of

pruning residues, branches or woody debris into small size fragments.

The material introduced into the loading mouth is pulled by two rollers against

the cutting disk.

The two pulling rollers are powered by independent speed-adjustable hydraulic

motors.

On the cutting disk, that rotates at a speed of 1500 rpm, two blades are

assembled that reduce the material to splinters of a 5-20 mm. length and a

counter-blade, fixed to the structure, that further reduces the splinters into

“chips”.

The “chips”, through the centrifugal action of the cutting disk, are projected into

a discharge conveyor.

The conveyor can be pointed in the required direction of discharge.

Technical features

•size of loading mouth mm 960 x 670

•MAX shreddable diameter mm 130

•diameter of flywheel mm 680

•thickness of flywheel mm 25

•blades n° 2

•rotation speed of flywheel (max) g/min. 1500

•length of shredded material mm 6 ÷ 12

•diameter of feeder rollers mm 120 -120

•maximum width between the rollers mm 140

•power of independent motor (YANMAR / HONDA) kW 8,2 ÷ 13.5

•hourly production m33 ÷ 5

•airborne noise produced by the machine ( 1 ) Db (A) ?

•weight Kg 420 ÷ 490

( 1 ) The MAX noise level indicated is measured in the operator area, during work

?Greater than 85 dB: the use of muffs is compulsory

Indice

Altri manuali Green Technik Cippatrice

Green Technik

Green Technik CIP 1000 Manuale utente

Manuali Cippatrice popolari di altre marche

Craftsman

Craftsman 79964 Manuale utente

Frontier

Frontier WC1208 Manuale utente

Viking

Viking GE 150 Manuale utente

Victory

Victory WC-8H Manuale utente

GTM Professional

GTM Professional GTS 1300 Manuale utente

Yardbeast

Yardbeast YB3514 Manuale utente

Patriot

Patriot Electric Motors Manuale utente

Echo

Echo CH5540 Manuale utente

DOSKO

DOSKO 13-21T-13H Manuale utente

Craftsman

Craftsman 486.24516 Manuale utente

Garland

Garland 1480 TQG Manuale utente

Vermeer

Vermeer BC160XL Guida rapida

Value Leader

Value Leader z9400 Guida

Timberwolf

Timberwolf TW 230HB Manuale utente

Salsco

Salsco 600PTO Manuale del prodotto

Cub Cadet

Cub Cadet 24A-424M710 Manuale utente

Champion

Champion 91050 Manuale

Kellfri

Kellfri 13-WC17H2 Manuale utente