Greenbridge PC1500 Guida

OPERATION MANUAL |SPARE PARTS LIST

PC1500

GREENBRIDGE

6277 HEISLEY ROAD, MENTOR, OHIO 44060

PHONE: 440.357.1500, FAX: 440.352.9553

WWW.GREENBRIDGE.COM

CONTENTS

PART I

1 General Safety Instructions ............................................................... A1

1.1 Basic Operation ......................................................................... A1

1.2 Basic Safety Precautions ........................................................... A1

1.3 Safety Instructions Governing Specific Operational Phases ..... A2

1.4 Warning of Electrical Dangers .................................................. A3

1.5 Grounding Instructions Shall Include the Following ................ A3

1.6 Before Operating ....................................................................... A4

1.7 During Operation....................................................................... A4

1.8 After Operating.......................................................................... A4

1.9 Signs and Symbols ....................................................................A5

2 Machine Information......................................................................... A6

2.1 Areas of Application.................................................................. A6

2.2 Environment Information .......................................................... A6

2.3 Storage....................................................................................... A7

2.4 Machine Description ................................................................. A7

2.5 Safety Devices........................................................................... A8

2.6 Technical Specification ............................................................. A9

3 Preparation Before Operating the Machine......................................A12

3.1 Shipping ...................................................................................A12

3.2 Transportation & Centre of Gravity .........................................A12

3.3 Construction Layout .................................................................A13

3.4 Installation ................................................................................A15

3.5 Operation Space .......................................................................A16

3.6 Operating Elements ..................................................................A17

3.7 Instructions for Loading PP Strap.............................................A20

3.8 Auto Strap Feeding Process......................................................A22

3.9 How to connect Upstream and Downstream Machine (B5

Connector) ................................................................................A24

4. Operating the Machine.....................................................................A25

4.1 TP-702Y ...................................................................................A25

4.2 TP-702YA.................................................................................A27

5. Adjustments......................................................................................A29

5.1 Strap Amount in the Accumulator Box.....................................A29

5.2 Adjustment for Feeding Pressure to the AccumulatorBox ......A30

5.3 Adjustment for Heater Temperature .........................................A31

5.4!Necessary Adjustments After Changing Strap Width..............A31

5.5!Adjustment for Feeding/Reversing Pressure ............................A34

5.6!Adjustment on Tensioning Rollers for High Tension ...............A36

5.7 Change Bundle Flow Direction (TP-702YA) ...........................A37

5.8 Speed and Pressure Adjustment of Press Bar and Side Pusher A37

6. Troubleshooting................................................................................A39

7. Maintenance .....................................................................................A41

PART II

1. Pneumatic System Diagram.................................................................B1

2. Wiring Diagram ..................................................................................B2

3. Inverter ParametersSetup..................................................................B57

PART III

1. Strapping Head Unit ...........................................................................C1

2. Bandway Unit...................................................................................C45

3. Accumulator Unit .............................................................................C65

4. Reel Control Group ..........................................................................C91

5. Body Frame Unit ............................................................................C103

6. Electric Control Unit ......................................................................C117

7. Transmission Unit...........................................................................C139

8. Pneumatic Unit................................................................................C155

PART I

-A1-

General Safety Instructions

1.1

Basic Operation

Read the operation and safety manual prior to using the strapping machine.

The operation and safety manual should remain attached to the machine at all times.

The machine may only be operated in accordance with its designated use.

The strapping machine was built in accordance with state-of-the-art standards and

recognized safety rules. Nevertheless, improper use can still result in injury to personnel

or damage to the machine and other material property.

Machine shall only be operated by trained personnel.

Perform inspections and maintenance at regular intervals. Refer to the Maintenance

section of the manual.

The machine may not be put in operation before checking the respective devices.

Safety devices must never be bridged or eliminated by any means.

To transport the equipment only use lifting apparatus and loading devices with sufficient

capacity.

Always disconnect from external power supply when changing the location of the

machine, even if the location should only be slightly changed. Connect power supply

properly before returning to service.

Do not alter or bypass protective interlocks.

Do not alter circuits and machine unless authorized to do so by the manufacturer.

1.2

Basic Safety Precautions

In addition to the instructions for operation, the user is to be instructed in all generally

applicable legal or mandatory regulations relevant to safety or the environment.

Long hair, loose-fitting garments, or jewelry can be a safety hazard. These items must be

secured prior to equipment operation.

Use protective equipment whenever appropriate or when required by law.

Carefully observe all safety instructions and warnings attached to the machine. Keep

safety labels clean and legible.

People that are being trained to operate or service the equipment must be supervised by

experienced personnel.

Any electrical work performed on the equipment must be conducted by a skilled

electrician or under the supervision of a skilled electrician. All work must be observed

good electrical engineering practice and follow safety rules and local wiring standards.

-A2-

1.3

Safety Instructions Governing Specific Operational Phases

Avoid unsafe operation of the equipment.

The machine is only to be operated when it is in good running order. Only operate the

equipment in a safe manner; all protective and safety devices must be in place and fully

functional. This includes removable safety devices, emergency shut-off equipment,

noise-protection devices and exhaust fans.

The machine is to be checked for damage and defects at least once each work shift. Any

changes, including the working behavior of the machine, are to be reported immediately.

If necessary, the machine is to be stopped and locked-out immediately.

In case of a malfunction, the strapping machine is to be immediately stopped and

locked-out until the fault has been eliminated.

Before starting the strapping machine, make sure that the area is clear and safe.

Do not place any tools or parts onto the machine.

Operating personnel needs to be well trained before executing special operations and

maintenance work; this work needs to be done with the proper supervision.

Always check and tighten connections after maintenance or repair.

After completing maintenance or repair, all safety devices must be replaced and checked

for functionality before operating the equipment.

To minimize the environmental impact, all consumables and replaced parts must be

disposed of safely.

Before starting the machine, check that the accessories have been stowed away safely.

Avoid operating the machine in a fashion that could upset its stability.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Greenbridge Attrezzature per l'imballaggio

Greenbridge

Greenbridge B600 Manuale utente

Manuali Attrezzature per l'imballaggio popolari di altre marche

U-Line

U-Line S-15188 Manuale utente

ITATOOLS

ITATOOLS ITA22 Manuale utente

Fieldpiece

Fieldpiece MG44 Manuale utente

Smart wasp

Smart wasp X300 Manuale utente

U-Line

U-Line S-1135 Manuale utente

Z.R. Tools

Z.R. Tools MS25-1 Manuale utente

Sipromac

Sipromac SIPROVAC 620A Manuale utente

strapex

strapex STR 66 Manuale utente

U-Line

U-Line H-5334 Manuale utente

Imetec

Imetec Q5901 Manuale utente

Transpak

Transpak TP-201 Guida

Lacor

Lacor 69352 Scheda tecnica

Eastey

Eastey EXS-100 Manuale utente

Inova

Inova SV 125 Manuale utente

CombiSteel

CombiSteel 7529.0010 Manuale utente

HUALIAN

HUALIAN HVC-260T/1A Manuale utente

U-Line

U-Line H-2079 Manuale utente

Strapack

Strapack iQ400 Istruzioni operative