Greenlee 624 Istruzioni operative

OPERATING, SAFETY AND SERVICE

INSTRUCTION MANUAL

For additional copies at no charge order 999 8117.3

624

WIRE GRIP

Read and undesestand this material before operating

or servicing this tool. Failure to understand how to

safely operate could result in an accident causing seri-

ous injury or death. This tool should only be operated

by qualied personnel.

999 8117.3 © 2019 Greenlee Tools, Inc. IM-984 REV 2 10/19

CABLE PREPARATION INSTRUCTIONS:

Strip approximately three inches of insulation off the

ends of the cables to be pulled.

The cable may be reduced in diameter as follows:

1. The central core should be clipped away and the

outer strands used in the grip head.

2. Using the Allen Wrench provided, back out

the set screws far enough to accomodate the

stripped cables.

3. Insert the bare wire strands into the grip head as

far as they will go.

4. Tighten both set screws in each grip jaw securely

against the conductors.

5. CAUTION: If the set screws extend above the

surface of the gripping head, damage to the

conduit could result. To prevent this, wrap the

head with electrical tape.

The Greenlee No. 624 Wire Grip is designed with four

gripping jaws to pull one or more conductors of either

copper or aluminum in 2” or larger size conduit.

The 624 Greenlee Wire Grip contains the following:

• One Each No. 624 Wire Grip

• One Each 905 1208.1 Allen Wrench

• Two Each 905 1352.0 Extra Set Screws

IMPORTANT: To avoid a pulling hazard, use the

following maximum load ratings.

• 1750 pounds maximum when a single wire grip

collar is used.

• 3250 pounds maximum on a wire grip pair, 624S

or 624L.

• 6500 pounds maximum both grip pairs.

NOTE: The grip head should not be more than 60%

lled nor less than 40% lled to assure that the set

screw does not project above the surface of the grip

body when the set screws are tightened down.

Greenlee Tools, Inc.

4455 Boeing Drive, Rockford, IL 61109-2988 USA

800/435-0786, in Illinois call 815/397-7070

Fax: 815/397-1865

Service: 800/435-2932, Canada: 800/233-5924

Indice

Altri manuali Greenlee Utensili elettrici

Greenlee

Greenlee GATOR CUAP32GL Manuale utente

Greenlee

Greenlee 36587 Manuale utente

Greenlee

Greenlee Fairmont RK6040 Manuale utente

Greenlee

Greenlee E12CCXL Manuale utente

Greenlee

Greenlee GATOR CK06FT Manuale utente

Greenlee

Greenlee Quick Draw 90 7906SB Manuale utente

Greenlee

Greenlee RK1550 Manuale utente

Greenlee

Greenlee RK12ID Manuale utente

Greenlee

Greenlee CTR100 Manuale utente

Greenlee

Greenlee GATOR PRO E12CCX Manuale utente

Greenlee

Greenlee ECCXL Manuale utente

Greenlee

Greenlee 750 Manuale utente

Greenlee

Greenlee GREENLEE KWIK-STRIPPER 45019 Manuale utente

Greenlee

Greenlee LPK1240 Manuale utente

Greenlee

Greenlee Tugger 640 Manuale utente

Greenlee

Greenlee CTR200 Manuale utente

Greenlee

Greenlee UT10 Ultra Tugger Manuale utente

Greenlee

Greenlee K2-1BGL Manuale utente

Greenlee

Greenlee GATOR RK12CX Manuale utente

Greenlee

Greenlee GATOR EK1230L Manuale utente

Greenlee

Greenlee EK50ML Manuale utente

Greenlee

Greenlee GATOR LS50L2 Manuale utente

Greenlee

Greenlee GATOR EK06ATL Manuale utente

Greenlee

Greenlee F09 Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale