greenPRO GP1200 Manuale utente
PROUDLY AUSTRALIAN
OWNED & OPERATED
GP1200
6-in-1 seeder
MANUAL
ADDRESS
Greenpro Solutions Pty Ltd
9 Research Street
Coolum Beach
QLD 4573
PHONE
1800 768 748
ONLINE
info@greenpro.com.au
www.greenpro.com.au
READ THIS OPERATION MANUAL CAREFULLY BEFORE
ATTEMPTING TO OPERATE THE UNIT
No part of this manual may be reproduced without
written permission.
All information in this manual is based on the latest
product information available at the time of printing.
Greenpro Solutions Pty Ltd
GP1200 6-IN-1 Seeder
Operations and Guidelines
Updated: July 2022
Original Instruction
All information, illustrations and specifications in this manual are based on the latest information at the time of publication.
The right is reserved to make changes at any time without notice.
COPYRIGHT© 2022
greenPRO
Greenpro Solutions Pty Ltd
All rights reserved
Previous Editions
COPYRIGHT© 2022
WARNING
On behalf of greenPRO we would like to thank you for
investing in the GP1200 6-IN-1 Seeder
Every greenPRO implement is manufactured to meet our
high Australian standards so that we can provide our owners
with the best product and service possible. Our aim is to
offer the right solutions to combat challenges so that you
can enjoy the lifestyle you’ve worked hard to create.
As an Australian owned business, your investment has
enabled our every success. Over 30 years combined active
involvement in this community has allowed our team to
provide solutions to combat challenges that Australian
farmers face in agriculture today.
We appreciate your patronage and hope you enjoy many years
of safe and satisfied use of your implement.
This manual should be considered a permanent part of your
greenPRO GP1200 6-IN-1 Seeder and stored in a safe place
for future reference.
Welcome to where the grass is greener.
CONGRATULATIONS,
YOU’RE A PRO.
SECTION 1
System Overview
SECTION 2
Set Up and Unpack
SECTION 3
Basic Operational Information
SECTION 4
Seed Flow Control Handle
SECTION 5
Available Attachments
SECTION 6
Dimensions and Specifications
SECTION 7
Maintenance
SECTION 8
Trouble Shooting Guide
SECTION 9
Helpful Planting Hints
SECTION 10
Your Notes
1
2
5
7
11
12
13
14
16
19
TABLE OF
CONTENTS
GP1200 6-in-1 Seeder
OPERATION MANUAL
SECTION 11
Warranty Policy
Warranty
Registration Form
Contact
20
24
25
1
GP1200 6-IN-1 SEEDER OPERATION MANUAL
1SYSTEM OVERVIEW
12v
Actuator
Rear seed
hopper
Seed ow
control handles
RollerDrawbar top
link levelling
adjustment
Drag bar
and mesh
2
GP1200 6-IN-1 SEEDER OPERATION MANUAL
1SYSTEM OVERVIEW
Disc plough
assembly
Electric seeder
brush motor
Optional extra
seed hopper
Wheels for moving
the seeder in
transport mode
Radio
Receiver
Standard
seeder box
2
GP1200 6-IN-1 SEEDER OPERATION MANUAL
2set up and unpack
The GP1200 will arrive with the tow
bar packed in the stowed position.
Pull both the drawbar and turnbuckle
down until the turnbuckle head
locates in the top link position on
the drawbar. When located correctly,
insert the top link & linch pins to
lock drawbar in position. Crank the
turnbuckle handle to adjust the
drawbar to your desired height.
To connect your GP1200 to your
tow vehicle, rstly, position tow ball
underneath the tow hitch. Lift the
hitch handle until it locks into the
open position and lower the drawbar
onto the tow ball by cranking the
turnbuckle. The handle on the tow
hitch should lock onto the tow ball
when located. If this does not occur,
raise drawbar, and repeat step until
locked correctly in position. You may
need to physically push down on the
tow hitch to force engage the tow
ball lock.
3
GP1200 6-IN-1 SEEDER OPERATION MANUAL
15 Amp blade fuse holder.
Plug your Anderson plug into the
Anderson plug attached to the
control box wiring harness.
Hook up your wiring harness to your
12 volt battery supply. Red wire is +
and black wire is -.
Before you tow your GP1200, connect
power to the unit using the supplied
battery extension cable, connected
through the Anderson plug located
near the drawbar pivot. Using the radio
remote supplied in your machine kit,
lower the wheels until the plough discs
are approximately 150mm clear of the
ground.
Note:
The axle legs are painted red to
indicate a maximum safe tow height.
2SET UP AND UNPACK
4
GP1200 6-IN-1 SEEDER OPERATION MANUAL
2SET UP AND UNPACK
13mm spanner / socket
Brush Cover
10mm spanner / socket / 5mm hex key & 1/8” hex key
Seed Brush
REQUIRED TOOLS:
AS OF OCT 2019:
CHANNEL 1 – ON/OFF switch for
auger brush system in the FRONT
seeder box.
CHANNEL 2 - Operation to LIFT
seeder wheels which in return drops
the cutting discs further into your
soil.
CHANNEL 3 - Operation to DROP
seeder wheels which lifts the cutting
discs further out of the soil.
CHANNEL 4 - ON/OFF switch for
auger brush system in the REAR
seeder box.
remote control for
Seeder Operations
RADIO TRANSMITTER
TIP: Always use a high quality 9volt battery to power your radio transmitter. Replace the
9volt battery at least every 3 months OR more often with continual use. As the battery
voltage drops, the effective radio range will drop accordingly.
5
GP1200 6-IN-1 SEEDER OPERATION MANUAL
PLEASE READ OPERATING INSTRUCTION CAREFULLY BEFORE USE.
› Do not turn GP1200 with plough discs engaged. Lower axle before turning to reset
for your next pass.
›Do not sit, stand or ride on the seeder while in use
› Maximum capacity of the seeder box seeder 1200 is 25kg per box
› Do not put hands in seed box while seeder motor is in the on position
› Do not put lime in seeder
› Only use granulated fertiliser
› Keep hands and feet clear when raising and lowering unit
› Keep hands and ngers clear when raising or lowering the drag and/or press
roll to avoid pinching
› The GP1200 tow hitch accommodates a 50mm, ensuring compatibility with most
standard tow vehicles, including ATVs, UTVs and Tractors. We do not recommend
using a car, as it impedes your view of the machine whilst in operation.
› Seeder is designed for off road use. DO NOT tow on public roadways.
› Make sure that the battery clips are connected to the proper terminals to avoid
damage to your electrical system and/or your UTV/tractor.
(Red = positive terminal. Black = negative terminal)
› Avoid coming in contact with any other metal parts on the vehicle when
connecting the battery clips to your battery.
› Adding lime or non-granular fertiliser to your seeder will void the warranty of
“all” parts associated with the seeding system.
› In addition the density of Lime is much greater than seed and can bind your
brush shaft causing the motor to “burn out”.
› Seed is far lighter and will not compact around your Seeder Brush and cause
damage to your seed motor like lime/non-granular fertiliser can.
› 10km max tow speed
DO NOT OPERATE YOUR SEEDER ON INCLINES
GREATER THAN 10°.
WARNING
BASIC OPERATIONAL
3INFORMATION
Indice
