GreenTec HX 170 Manuale utente

GreenTec

Hedge Cutter HX 230

HX 170 - 230

Hedge Cutter

Instructions & Spare Parts Book

GreenTec

Hedge Cutter HX 230

This page is left blank

intentionally

GreenTec

Hedge Cutter HX 230

Important Information HX 170 - 230

Manual

1st edition –January 2014

IMPORTANT

The contents of this Manual are based on the applicable information at the time of

publication.

However, as our products are regularly updated, the specifications will be subject

to occasional changes. In case you find information in this Manual that deviates

from the product in question, please contact our ”Aftersale” department for

guidance.

Ensure that this Manual is seen by the operator prior to his first use of the

machine. It is important that the operator fully understands the contents of

this Manual prior to using the equipment.

(In case of resale, this Manual must follow the equipment!)

GreenTec A/S

Merkurvej 25

DK-6000 Kolding

Denmark

Tel: +45 75553644

Fax: +45 75554243

Email: [email protected]

http: www.greentec.eu

GreenTec

Hedge Cutter HX 230

Contents

Contents .......................................................................................................................4

Introduction..................................................................................................................5

Useful Information.......................................................................................................6

EC Declaration of Conformity.....................................................................................7

Safety............................................................................................................................8

Recommendations.....................................................................................................10

Pay attention to the following risks...........................................................................10

Do's..........................................................................................................................10

Don'ts.......................................................................................................................11

Product Description...................................................................................................12

Specifications.............................................................................................................12

Prior to start-up of work............................................................................................13

Setting of Working Posture.......................................................................................13

Starting the Tool.......................................................................................................13

Stopping the Tool.....................................................................................................13

Driving Instructions...................................................................................................13

High-Voltage Cables ................................................................................................14

Mounting / Dismounting............................................................................................14

Field of Application...................................................................................................15

Charts .........................................................................................................................16

Maintenance...............................................................................................................17

Service Check / Re-tightening..................................................................................17

Lubrication................................................................................................................17

Hydraulic Hoses.......................................................................................................17

Oil Supply.................................................................................................................18

Table: Regular Maintenance ....................................................................................19

Bolts and Bushings...................................................................................................19

Storage.....................................................................................................................20

Troubleshooting.........................................................................................................21

Noise Measurement...................................................................................................21

Supplier Details and CE Marking..............................................................................22

Bans - Cautions - Regulations..................................................................................22

Dismantling ................................................................................................................22

GreenTec Warranty Provisions.................................................................................23

Spare Parts.................................................................................................................24

Overview - Main Parts..............................................................................................24

Overview - Main Parts..............................................................................................25

Ram..........................................................................................................................26

Two-way Valve.........................................................................................................27

Cutting knifes, complete...........................................................................................28

Stickers ....................................................................................................................29

GreenTec

Hedge Cutter HX 230

Introduction

Dear Customer!

Your new GreenTec hedge cutter was designed based on more than 20 years of experience with tractor

mounted equipment for the maintenance of green spaces. The hedge cutter was produced using the

newest technology and in accordance with recognized safety provisions, standards and regulations.

Our goal is to provide a product that will not give cause damage, injury or misunderstandings during use,

transport or maintenance.

This User Manual contains information and instructions that are important and useful in order to

preserving the operational reliability and value of your GreenTec hedge cutter. Consequently, you

should carefully read this Manual as it will give you knowledge of its fitting, use, care and maintenance.

Please pay extra attention to the safety instructions.

We invite you to take a look at our website at www.greentec.eu –where you will have access to the

latest instructions and spare parts books updates concerning our entire product portfolio via the vendor

We hope that you will enjoy your new GreenTec machine.

Kind regards,

John Christensen

Sales Director, GreenTec A/S

At GreenTec, our vision is to develop and sell quality machines for the maintenance of green

spaces, at farms, plants, airports, local government locations etc. Using innovative product

development, we aim to become leading within our field.

We use a simple and functional design for all our machines and work closely with vendors and end-

users. It is our goal to cover all market segment needs, preferably providing them with two different

solutions. Using in-depth demand analysis and serious guidance, we strive to provide our customers

with the best possible solution that fulfills all individual needs by means of a modular product portfolio.

Furthermore, we aim to offer the best possible after sales service as well as expedient and efficient

spare parts deliveries.

GreenTec

Hedge Cutter HX 230

Useful Information

In connection with the first use of the machine, the seller must ensure that the buyer

receives this User Manual and that they fully understand its contents before they are is

allowed to proceed. If the machine is resold, this User Manual MUST be handed over

to the new owner.

Please insert the following data. Then you will have the necessary information at hand

when you order spare parts or otherwise contact us.

Serial no.

Date of delivery

Vendor

Tel / fax

GreenTec A/S

Merkurvej 25

DK-6000 Kolding

Denmark

Tel: +45 75553644

Fax: +45 75554243

Email: [email protected]

http: www.greentec.eu

Opening Hours: Mon thru Fri 8:00 am to 4:00 pm

GreenTec

Hedge Cutter HX 230

EC Declaration of Conformity

adapted EEC Directive

89/392/EEC, 91/368/CEE

The Undesigned, GreenTec A/S,Merkurvej 25, DK-6000

Kolding,

do hereby declare that

Product

Model

Serial no. & Date

Type

that was manufactured by the above-mentioned company

conforms to the relevant guidelines of Directives 89/392/EEC,

98/37/EC and AMD 91/368/EEC, AMD 93/44/EEC, AMD

93/68/EEC and corresponds to European standard BSEN

292, part 1: 1991 Safety of machinery - Terminology,

methodology; part 2: 1991 Safety of machinery -Technical

specifications and other national standards that are

associated with its design and construction as mentioned in

the technical documentation.

On behalf of GreenTec A/S

Signed..................................................................

Title............................................. Date .....................

GreenTec

170 - 230

GreenTec

Hedge Cutter HX 230

Safety

Caution

Liquids under pressure.

Please refer to the

Technical Manual for

information about service

procedures.

Caution

Flying objects. Keep

a safe distance from

the machine when in

use.

Caution

Keep a safe distance

from the cutter

knives when the

machine is in use.

Never remove safety

guards / guarded

switches.

Caution

Stay outside the swivel

range of the tools.

Caution

Turn off the engine and

remove the key before

performing any

maintenance or repair work

on the machine.

Caution

Check that all bolts and

nuts are tightened every 8

hours.

Caution

Read the User Manual prior

to operating the machine.

Follow all instructions and

safety provisions when using

the machine.

GreenTec

Hedge Cutter HX 230

This User Manual contains basic references to construction, operation and

maintenance. Thus, this User Manual should be studied by and made available to the

staff prior to start-up.

Never allow the HX 170 - 230 to be operated or maintained by individuals that are not

familiar with this User Manual or the associated risks. The driver is responsible for and

must monitor the staff. Should the staff not be sufficiently trained, such training must

be provided. Furthermore, the driver must ensure that the staff knows and fully

understands the contents of this User Manual.

Maintenance tasks that are not mentioned in this User Manual must be performed by

authorized technicians only.

Failure to observe the safety signs may result in the following risks:

Danger to people near non-secured work areas

Failure of vital machine functions

Failure of designated methods of maintenance or repair

Danger to people in case of mechanical or chemical impact.

Environmental hazards due to hydraulic oil spills

Never work in the vicinity of the machine unless it is completely stopped. The

procedure mentioned in this User Manual to completely halt the machine must be

followed.

Maintenance work with a raised tool is allowed only when appropriate support

elements have been applied. Use appropriate tools and work gloves when replacing

spare parts.

Oil and grease must be discarded properly and responsibly.

GreenTec

Hedge Cutter HX 230

Recommendations

Pay attention to the following risks

You may get stuck when the machine is coupled or decoupled.

The machine may fall over when the wing/wings is/are raised (not all models).

You may get caught by the rotating shaft from the power take-off. (not all models)

You may get hit or caught by moving parts such as knives, saw blades, driving shaft or

wings.

You may get hit by flying objects or machine parts in case of breakdowns.

The machine may fall over when not in use (not all models).

Sprays of oil under high pressure from damaged screw-joints or hydraulic hoses.

Accidents from collisions with other machines or lost objects on the ground.

Pay attention to the freely swinging knives when the wings are folded up. Crush

hazard! (not all models)

Do's

Ensure that the operator has read this Manual and has been trained in the use of the

machine.

Ensure that all guards are in place and that the tractor's windows are closed.

We recommend using impact-proof guards on the tractor.

Before leaving the driver's cab, ensure that the machine is resting on the ground, that

its hydraulics is not pressurized and that the saw blades / knives have stopped rotating

(not all models).

Check that all guards are correct mounted and that the equipment is free from

damaged or loose parts. Take extra care to ensure that all knives, flails and saw blades

are present and free from cracks or other damage.

Check the work area and remove any cords, poles, large stones or other dangerous

objects prior to starting the work.

Ensure that all warning signs are visible, present, undamaged and legible.

Use ear protection when operating the machine from a non-soundproof cab or with the

cab windows opened.

Ensure that all tractor guards are undamaged and adequately fitted.

Drive at speeds suited for the terrain and any other vehicles or obstacles.

Ensure that the tractor complies with the manufacturer's minimum weight

recommendations - use extra ballast if necessary.

Check that all fittings, connectors and couplings are in good condition.

Follow the manufacturer's instructions for coupling and decoupling the machine to/from

the tractor.

Always use knives that are recommended by the manufacturer and ensure that they

are adequately fitted and undamaged.

Ensure that all hydraulic tubes and hoses are correctly placed in order to avoiding

rubbing, stretching, crushing or bending (not all models).

Check that all knives, flails and saw blades have stopped rotating before folding the

machine to its transport position (not all models).

Disconnect the machine, stop the engine and remove the key before exiting the cab,

notwithstanding the reason for exiting.

Remove remaining plant debris and loose objects from the work area.

Always secure the machine using the provided holders when it is not connected to the

tractor (not all models).

Altri manuali per HX 170

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GreenTec Tagliabordi

GreenTec

GreenTec RC 162 Manuale utente

Manuali Tagliabordi popolari di altre marche

MTD

MTD HT 51 E Manuale utente

McCulloch

McCulloch T22 LS Manuale utente

COCKRAFT

COCKRAFT PRO HL36-S Manuale utente

Grizzly

Grizzly CT 1800 Li Manuale utente

Peco

Peco Z Trimmer ZT-3000 Manuale utente

Solo

Solo 116 Manuale utente

Stiga

Stiga ST 1200 Manuale utente

Echo

Echo GT-225 - 10-09 Manuale utente

RedMax

RedMax BT17 Manuale utente

GreenWorks

GreenWorks STA806 Manuale utente

Parkside

Parkside PHSL 900 A3 Manuale utente

Gardeo

Gardeo PRO GPTHT2560 Manuale utente

Park

Park DT-810870 Manuale utente

Worx

Worx WG209 Manuale utente

Gardenline

Gardenline 43671/HTKS26 Manuale utente

Makita

Makita 3710 Manuale utente

Champion

Champion 100683 Manuale utente

Stihl

Stihl FS 311 Manuale utente