Gripe Lite GRTFR83 Manuale utente

OPERATOR’S MANUAL

www.grip-rite.com

AND PARTS LIST

GRTFR83, GRTFR83L, GRTFC83 & GRTFW83

SHORT BODY FRAMING NAILERS

MODELS

GRTFW83

GRTFC83

GRTFW83

GRTFR83(L)

TABLE OF CONTENTS

------------------------------------------------2

TABLE OF CONTENTS

SPECIFICATIONS

GRTFR83(L) Fastener Selection Chart

SAFETY

TOOL PARTS & DESCRIPTIONS

OPERATION --------------------------------------------------------------16

Loading Fasteners

Adjusting Nail Drive -------------------------------------------------17

Selecting Trigger Operation --------------------------------------17

TOOL OPERATION

Sequential Operation

Contact Trip Operation

MAINTENANCE

Lubrication

Cleaning

Trigger Check

TROUBLESHOOTING

TOOL CHECKS

IMPORTANT SAFETY INFORMATION

You must read this entire manual and familiarize yourself with

all safety, operating, and service instructions before loading,

handling, or using your tool. When used correctly, pneumatic

fastening tools provide a lightweight, powerful, and safe means

of fastening. Used improperly, these tools can cause serious

injury to you and those around you.

GRTFC83 Fastener Selection Chart

GRTFW83 Fastener Selection Chart

GRTFR83(L)

GRTFC83

GRTFW83

GRTFR83 PARTS SCHEMATIC & LIST

GRTFR83L PARTS SCHEMATIC & LIST

GRTFC83 PARTS SCHEMATIC & LIST

GRTFW83 PARTS SCHEMATIC & LIST

WARRANTY---------------------------------------------------------------30

----------------------------------------------------------29

-------------------------------------------------28

--------------------------26

--------------------------24

-------------------------22

-------------------------20

---------------------------------------------------------------19

-------------------------------------------------------------19

---------------------------------------------------------19

---------------------------------------------18

-----------------------------------------------18

-----------------------------------------------------18

---------------------------------------------------16

----------------------------------------------------------------14

-----------------------------------------------------------------12

--------------------------------------------------------------10

---------------------------------5

----------------------------------------------------------------------6

---------------------------------4

------------------------------3

--------------------------------------------------------3

----------------------------------10

Size Box Shank Bright Galvanized

GRTFR83(L) FRAMING NAILERS

FASTENER RANGE 2” - 3 1/4” (50 mm - 83 mm)

.113” - .148” dia. (3 - 3.8 mm) Round Head

FASTENER TYPE 21° Round Head Plastic Collation

MAX MAGAZINE CAPACITY 75 Nails

MAX AIR PRESSURE 120 psi (8.3 bar)

MIN AIR PRESSURE 70 psi (4.8 bar)

TOOL WEIGHT 6.9 lbs. (3.1 kg)

TOOL LENGTH 21.7” (55.1 cm) [GRTFR83L - 22.1” (56.1 cm)]

TOOL HEIGHT 12.4” (31.5 cm)

TOOL WIDTH 4.5” (11.4 cm)

TRIGGER TYPE SELECTABLE - SEQUENTIAL OR BUMP FIRE

AIR INLET MALE SWIVEL QUICK CONNECT COUPLER

LUBRICATION 10W Air Tool Oil (Provided)

NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 3774, ISO 11201:

A-weighted single-event sound

pressure level at operator’s position ------------------------------------LpA, 1s = 93 dBA

A-weighted single-event sound power level ---------------------------LwA, 1s = 102 dBA

A-weighted single-event surface sound

pressure level -----------------------------------------------------------------LpA, 1s = 89 dBA

VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8862-1

Weighted root mean square acceleration ------------------------------= 3.6 m/s

For best results, use Grip-Rite® collated fasteners.

GRTFR83(L) FASTENER SELECTION CHART

6D 2”x .113 5M Smooth GR03 GR05G GR05HG

6D 2”x .113 5M Ring GR04 GR04G GR04HG

8D 2-3/8”x .113 5M Smooth GR07 GR09G GR09HG

8D 2-3/8”x .113 5M Ring GR08R GR08G GR06RHG

10D 2-3/8”x .148 4M Smooth GR8D148 GR8D148HG N/A

10D 3” x .120 4M Smooth GR301 GR301G GR301HG

10D 3” x .120 4M Ring N/A GR408G GR408HG

10D 3” x .131 4M Smooth GR014 N/A N/A

12D 3-1/4” x .120 4M Smooth GR444 GR444G GR444HG

16D 3-1/4” x .131 4M Smooth GR024 GR034G GR034HG

12D 3-1/4” x .148 4m Smooth GR314148 N/A N/A

SPECIFICATIONS

GRTFR83(L) SPECIFICATIONS

MODEL

HD Galvanized

Size Box Shank Bright Galvanized

GRTFC83 FRAMING NAILERS

FASTENER RANGE 2” - 3 1/4” (50 mm - 83 mm)

.113” - .131” dia. (3 - 3.3 mm)

FASTENER TYPE 30°-34 Clipped & Offset Round Head Paper Collation°

MAX MAGAZINE CAPACITY 80 Nails

MAX AIR PRESSURE 120 psi (8.3 bar)

MIN AIR PRESSURE 70 psi (4.8 bar)

TOOL WEIGHT 7.3 lbs. (3.3 kg)

TOOL LENGTH 21.7” (55.1 cm)

TOOL HEIGHT 13.5” (34.3 cm)

TOOL WIDTH 4.5” (11.4 cm)

TRIGGER TYPE SELECTABLE - SEQUENTIAL OR BUMP FIRE

AIR INLET MALE SWIVEL QUICK CONNECT COUPLER

LUBRICATION 10W Air Tool Oil (Provided)

NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 3774, ISO 11201:

A-weighted single-event sound

pressure level at operator’s position ------------------------------------LpA, 1s = 93 dBA

A-weighted single-event sound power level ---------------------------LwA, 1s = 102 dBA

A-weighted single-event surface sound

pressure level -----------------------------------------------------------------LpA, 1s = 89 dBA

VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8862-1

Weighted root mean square acceleration ------------------------------= 3.6 m/s

For best results, use Grip-Rite® collated fasteners.

GRTFC83 FASTENER SELECTION CHART

6D 2”x .113 2.5M Smooth GRSP6D GRSP6DG GRSP6DHG

6D 2”x .113 2.5M Ring GRSP6DR GRSP6DRG GRSP6DRHG

8D 2-3/8”x .113 2.5M Smooth GRSP8D GRSP8DG GRSP8DHG

8D 2-3/8”x .113 2.5M Ring GRSP8DR GRSP8DRG GRSP8DRHG

10D 3”x .120 2M Smooth GRSP10D GRSP10DG GRSP10DHG

10D 3” x .120 2M Ring GRSP10DR GRSP10DRG GRSP10DRHG

10D 3” x .131 2M Smooth GRSP10DZ GRSP10DZG N/A

12D 3-1/4” x .120 2M Smooth GRSP12D N/A N/A

12D 3-1/4” x .120 2M Ring N/A GRSP12DRG GRSP12DRHG

12D 3-1/4” x .131 2M Smooth GRSP12DZ GRSP12DZG GRSP12DZHG

16D 3-1/2” x .131 2m Smooth GRSP16DZ GRSP16DZG GRSP16DZHG

SPECIFICATIONS

GRTFC83 SPECIFICATIONS

MODEL

HD Galvanized

Size Box Shank Bright Galvanized

GRTFW83 FRAMING NAILERS

FASTENER RANGE 2” - 3 1/4” (50 mm - 83 mm)

.113” - .131” dia. (3 - 3.3 mm)

FASTENER TYPE 28° Wire Weld Framing

MAX MAGAZINE CAPACITY 95 Nails

MAX AIR PRESSURE 120 psi (8.3 bar)

MIN AIR PRESSURE 70 psi (4.8 bar)

TOOL WEIGHT 7.5 lbs. (3.4 kg)

TOOL LENGTH 17.0” (43.2 cm)

TOOL HEIGHT 13.25” (33.7 cm)

TOOL WIDTH 4.5” (11.4 cm)

TRIGGER TYPE SELECTABLE - SEQUENTIAL OR BUMP FIRE

AIR INLET MALE SWIVEL QUICK CONNECT COUPLER

LUBRICATION 10W Air Tool Oil (Provided)

NOISE CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 3774, ISO 11201:

A-weighted single-event sound

pressure level at operator’s position ------------------------------------LpA, 1s = 93 dBA

A-weighted single-event sound power level ---------------------------LwA, 1s = 102 dBA

A-weighted single-event surface sound

pressure level -----------------------------------------------------------------LpA, 1s = 89 dBA

VIBRATION CHARACTERISTIC VALUES IN ACCORDANCE WITH ISO 8862-1

Weighted root mean square acceleration ------------------------------= 3.6 m/s

For best results, use Grip-Rite® collated fasteners.

GRTFW83 FASTENER SELECTION CHART

6D 2”x .113 2.5M Smooth GRS6D GRS6DG GRS6DHG

6D 2”x .113 2.5M Ring GRS6DR GRS6DRG GRS6DRHG

8D 2-3/8”x .113 2.5M Smooth GRS8D GRS8DG GRS8DHG

8D 2-3/8”x .113 2.5M Ring GRS8DR GRS8DRG GRS8DRHG

10D 3”x .120 2M Smooth GRS10D GRS10DG GRS10DHG

10D 3” x .120 2M Ring N/A GRS10DRG GRS10DRHG

10D 3” x .131 2M Smooth GRS10DZ N/A N/A

12D 3-1/4” x .120 2M Smooth GRS12D GRS12DG GRS12DHG

12D 3-1/4” x .120 2M Ring N/A GRS12DRG GRS12DRHG

12D 3-1/4” x .120 2M Screw N/A GRS12DSG GRS12DSHG

16D 3-1/4” x .131 2M Smooth GRS12DZ GRS12DZG N/A

SPECIFICATIONS

GRTFW83 SPECIFICATIONS

MODEL

HD Galvanized

16D 3-1/2” x .131 2M Smooth GRS16DZ GRS16DZG GRS16DZHG

SAFETY

SAFETY LABELS

These pneumatic fastening tools include a warning label to help remind you of

important safety information when operating the tool. The safety label must be

legible at all times, and must be replaced if it becomes worn or damaged.

SAFETY SYMBOLS

These safety symbols provide a visual reminder of basic safety rules, and

the personal injury hazard that may arise if all safety and operating

instructions are not followed. Make sure you understand the meaning of

each of these symbols, and protect yourself and others by obeying all safety

and operating instructions.

SYMBOL DESCRIPTION

- The manual

READ THE MANUAL

contains important safety and operating

instructions that must be followed. All tool

users must read the manual before using

the tool.

WEAR SAFETY GLASSES - Tool operator

and bystanders must wear safety glasses

with side shield that meet ANSI Z87.1

requirements.

RISK OF PERSONAL INJURY - Failure to

follow all safety and operating instructions,

or misuse of the tool, can result in serious

injury to tool operator and bystanders.

WARNING

USER MUST READ OPERATION MANUAL BEFORE USING TOOL TO REDUCE THE RISK OF INJURY. FAILURE TO

FOLLOW THESE OPERATIONS MAY RESULT IN SERIOUS INJURY. ALWAYS WEAR SAFETY GLASSES BEFORE

USING THE TOOL. NEVER USE BOTTLED OR COMBUSTIBLE GASES (OXYGEN, ACETYLENE, ETC) ONLY USE

REGULATED AIR. DISCONNECT AIR SUPPLY WHEN CLEARING A JAM, REPLACING NO-MAR PAD, SERVICING,

OR WHEN TOOL IS NOT IN USE. NEVER CARRY TOOL WITH FINGER ON THE TRIGGER. KEEP FINGER OFF

TRIGGER WHEN NOT DRIVING FASTENERS AND WHEN LOADING OR UNLOADING NAILS. ALWAYS KEEP TOOL

POINTED IN A SAFE DIRECTION. MAX 120 PSI / 8 BAR

GRTFR83

21° FRAMING NAILER

USE 2.87~3.3mm RH NAIL 2”~3-1/4”

(50~83mm)

WEAR SAFETY GLASSES

Always wear safety glasses with side shields that meet ANSI

Z87.1 requirements when operating the tool. Make sure all

others in work area wear safety glasses.

WEAR HEARING PROTECTION

Wear hearing protection to protect your hearing from noise.

Prolonged exposure to loud noise can result in hearing loss.

NEVER OPERATE THE TOOL WITH OXYGEN OR OTHER

BOTTLED GASES

Oxygen and other reactive or high-pressure bottled gases can

cause the tool to explode. Use clean, dry regulated

compressed air from a properly operating air compressor.

DO NOT EXCEED MAXIMUM RECOMMENDED OPERATING

AIR PRESSURE OF 120 PSI /8.6 Bar.

Exceeding the maximum recommended air pressure can

cause the tool housing to burst, or cause premature failure of

components.

NEVER CONNECT THE TOOL TO AN AIR SUPPLY THAT

HAS THE POTENTIAL TO EXCEED 180 PSI/12.4 Bar.

Using a regulated air supply with a line or tank pressure

greater than 180 psi can cause the tool to burst if the air line

regulator fails suddenly.

USE AN AIR HOSE RATED FOR 180 PSI/12.4 Bar OR

GREATER

Always use air hose rated to handle 180 psi or the maximum

potential pressure of the air supply.

ONLY USE A RELIEVING-TYPE AIR COUPLING IN THE

TOOL

AIR INLET OPENING

Use of a non-relieving air coupling on the tool can trap air

inside the tool housing, and allow the tool to drive a fastener

SAFETY

SAFETY INSTRUCTIONS

even after the air hose has been disconnected.

120 psi

4.9 bar

70 psi 8.3 bar

SAFETY

DO NOT ATTEMPT TO OPERATE THE TOOL IF THE

TOOL’S OPERATING CONTROLS HAVE BEEN MODIFIED

OR ARE NOT WORKING PROPERLY.

Attempting to use a tool with modifed or malfunctioning trigger

or workpiece contact can result in a fastener being driven

unintentionally.

USE CORRECT FASTENERS

Only use the correct fastener for the tool. Using fasteners

with incorrect specifcations can jam the tool or cause serious

injuries.

USE THE CORRECT FASTENERS FOR THE APPLICATION.

Using the wrong fasteners can cause the workpiece to split

and allow the fastener to fy free.

KEEP TOOL POINTED IN A SAFE DIRECTION WHEN

FASTENERS.

Never point the tool at yourself or anyone else when loading

fasteners.

DO NOT LOAD TOOL WITH TRIGGER OR WORKPIECE

CONTACT DEPRESSED.

Depressing the trigger or workpiece contact during loading

can result in an unintentional fastener drive if both devices are

accidentally actuated at the same time.

KEEP FINGER OFF TRIGGER UNTIL TOOL IS IN POSITION

TO DRIVE A FASTENER.

An unexpected bump or sudden contact with your body or that

of a bystander can result in serious injuries.

AVOID DRIVING FASTENERS INTO KNOTS, ON TOP OF

OTHER FASTENERS, AT WORKPIECE EDGES, OR INTO

BRITTLE MATERIALS.

Driving fasteners into extremely hard materials, or driving into

workpiece edges, can cause fasteners to defect away from

SAFETY INSTRUCTIONS

the workpiece. Flying fasteners can cause serious injuries.

SAFETY

KEEP HANDS AND BODY PARTS AWAY FROM AREA

BEING FASTENED.

Fasteners can defect and turn as they are being driven into

the workpiece, and penetrate fngers, hands, and other body

parts that may be in the fastening area.

DO NOT OVERREACH OR WORK WHILE ON UNSTABLE

FOOTING

If you lose your balance while fastening, you could drive a

fastener into yourself or a bystander.

DO NOT USE TOOL IF TOOL MALFUNCTIONS OR BEGINS

LEAKING AIR.

Operating a malfunctioning tool can result in an unexpected

fastener discharge and injury to yourself or others.

DISCONNECT THE TOOL FROM THE AIR SUPPLY TO

RELOAD, CLEAR JAMS, OR PERFORM MAINTENANCE.

Never attempt to reload a tool, clear a jam, or perform

maintenance without frst disconnecting the air supply.

NEVER LEAVE A LOADED, PRESSURIZED TOOL

UNATTENDED

A loaded, pressurized tool could be picked up or handled by

someone who is unfamiliar with the tool or that has not read

the tool manual.

KEEP TOOLS OUT OF THE REACH OF CHILDREN

Place the tool back in the tool box after use, and store the tool

out of reach.

DO NOT MODIFY TOOL

Modifcations can cause a tool to be unsafe and can cause the

SAFETY INSTRUCTIONS

tool to operate improperly.

DESCRIPTION

GRTFR83(L) TOOL PARTS

Altri manuali per GRTFR83

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Gripe Lite Pistola sparachiodi

Gripe Lite

Gripe Lite GRTFR83 Manuale utente

Manuali Pistola sparachiodi popolari di altre marche

Performance Tool

Performance Tool M643 Manuale utente

Hitachi

Hitachi VH650 - Fencing Nailer, Full Head Manuale utente

Parkside

Parkside PET 25 B1 Manuale utente

Senco

Senco Fusion Technology F-35XP Manuale utente

Grizzly

Grizzly G1847 Manuale utente

Ryobi

Ryobi R18N18G Manuale utente

Black & Decker

Black & Decker 492848-00 Manuale utente

HOLZMANN MASCHINEN

HOLZMANN MASCHINEN TN90 Manuale utente

Metabo HPT

Metabo HPT NR 3690DC Manuale di istruzioni

Surtek

Surtek CN650 Dimensioni e guida di installazione

Makita

Makita GF600 Manuale utente

Parkside

Parkside PET 25 B1 Manuale utente

Senco

Senco AirFree 25 Manuale utente

Freeman

Freeman P50LSLW Manuale utente

Aicon PRO

Aicon PRO DAC4507 Manuale utente

DAJ

DAJ XR150A Manuale utente

Makita

Makita AN923 Manuale utente

Grizzly

Grizzly T20644 Manuale utente