Grizzly H0600 Manuale utente

1821 VALENCIA ST., BELLINGHAM, WA 98227

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM

WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

PRINTED IN CHINA

12V CORDLESS TRIMMER

MODEL H0600

INSTRUCTION MANUAL

H0600 12V Cordless Trimmer -1-

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

Indicates an imminently hazardous situation which, if

not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if

not avoided, MAY result in minor or moderate injury.

It may also be used to alert against unsafe practices.

This symbol is used to alert the user to useful information

about proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous

conditions. This manual uses a series of symbols and signal words which are

intended to convey the level of importance of the safety messages. The progres-

sion of symbols is described below. Remember that safety messages by them-

selves do not eliminate danger and are not a substitute for proper accident pre-

vention measures.

NOTICE

Safety Instructions For Power Tools

5. KEEP CHILDREN AND VISITORS

AWAY. All children and visitors

should be kept a safe distance from

work area.

6. MAKE WORK SHOP CHILD

PROOF with padlocks, master

switches, or by removing starter

keys.

7. DON’T FORCE TOOL. It will do the

job better and safer at the rate for

which it was designed.

8. USE RIGHT TOOL. Don’t force tool

or attachment to do a job for which it

was not designed.

1. KEEP ALL SAFETY DEVICES IN

PLACE and in working order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of check-

ing to see that keys and adjusting

wrenches are removed from tool

before turning on.

3. KEEP WORK AREA CLEAN.

Cluttered areas and benches invite

accidents.

4. DON’T USE IN DANGEROUS

ENVIRONMENT. Don’t use power

tools in damp or wet locations, or

where any flammable or noxious

fumes may exist. Keep work area

well lighted.

H0600 12V Cordless Trimmer-2-

9. USE PROPER EXTENSION CORD

for the charger. Make sure your

extension cord is in good condition.

Conductor size should be in accor-

dance with the chart below. The

amperage rating should be listed on

the motor or tool nameplate. An

undersized cord will cause a drop in

line voltage resulting in loss of power

and overheating. Your extension

cord must also contain a ground wire

and plug pin. Always repair or

replace extension cords if they

become damaged.

Minimum Gauge for Extension Cords

10. WEAR PROPER APPAREL. Do not

wear loose clothing, gloves, neck-

ties, rings, bracelets, or other jewel-

ry which may get caught in moving

parts. Non-slip footwear is recom-

mended. Wear protective hair cover-

ing to contain long hair.

11. ALWAYS USE SAFETY GLASSES.

Also use face or dust mask if cutting

operation is dusty. Everyday eye-

glasses only have impact resistant

lenses, they are NOT safety glass-

es.

12. SECURE WORK. Use clamps or a

vise to hold work when practical. It’s

safer than using your hand and frees

both hands to operate tool.

Safety Instructions For Power Tools

AMP LENGTH

RATING 25ft 50ft 100ft

0-6 18 16 16

7-10 18 16 14

11-12 16 16 14

13-16 14 12 12

17-20 12 12 10

21-30 10 10 No

13. DON’T OVERREACH. Keep prop-

er footing and balance at all times.

14. MAINTAIN TOOLS WITH CARE.

Keep tools sharp and clean for

best and safest performance.

Follow instructions for lubricating

and changing accessories.

15. DISCONNECT TOOLS before ser-

vicing and changing accessories,

such as blades, bits, cutters, and

the like.

16. REDUCE THE RISK OF UNIN-

TENTIONAL STARTING. Make

sure switch is in off position before

plugging in.

17. USE RECOMMENDED ACCES-

SORIES. Consult the owner’s

manual for recommended acces-

sories. The use of improper acces-

sories may cause risk of injury.

18. CHECK DAMAGED PARTS.

Before further use of the tool, a

guard or other part that is dam-

aged should be carefully checked

to determine that it will operate

properly and perform its intended

function. Check for alignment of

moving parts, binding of moving

parts, breakage of parts, mount-

ing, and any other conditions that

may affect its operation. A guard or

other part that is damaged should

be properly repaired or replaced.

19. NEVER LEAVE TOOL RUNNING

UNATTENDED. TURN POWER

OFF. Don’t leave tool until it comes

to a complete stop.

H0600 12V Cordless Trimmer -3-

Never leave a battery unattend-

ed while charging. While charg-

ing will make the battery and

charging unit warm, if it

becomes hot to the touch, dis-

connect the charger immediate-

ly. There is a possibility of fire

hazard. Have the battery and

charging unit checked by a qual-

ified electrical service techni-

cian.

CHARGING SAFETY

1. READ ALL INSTRUCTIONS and

warnings on the battery and charg-

er before charging the battery.

2. CHARGE ONLY USING THE SUP-

PLIED CHARGER AND BAT-

TERY. Do not use with other batter-

ies, chargers or cordless equip-

ment.

3. DO NOT EXPOSE BATTERY OR

CHARGER TO WET OR RAINY

CONDITIONS. Moisture greatly

increases the risk of a shock haz-

ard.

4. DO NOT TOUCH BATTERY

POLES with any conductive materi-

als.Touching any two poles at the

same time causes a short condition

and can cause sparks, electrical

shock or fire.

5. DO NOT STORE BATTERY WITH

CONDUCTIVE MATERIALS.

Storing the battery in a box of

screws or nails can cause shorting

across the battery poles.

6. DO NOT THROW BATTERY IN

FIRE. Combustion of some of the

batteries’ component materials can

cause toxic fumes and possible

explosion.

7. IF CHARGER LIGHT FAILS TO

COME ON check the incoming

power supply. If power source is

okay, then the fuse inside the

charger needs replacement.

Charger should be serviced by a

qualified electrical technician only.

8. DO NOT ATTEMPT TO MODIFY

THE CHARGER PLUG. Modifying

the plug will result in a safety haz-

ard and will void the warranty.

9. CHARGER IS DESIGNED TO

OPERATE AT 110-120 VOLTS.

Never try to plug into any circuit that

is not 110-120 volts. Never modify

or change the plug that is attached

to the charger unit to attempt to

plug into 220 volt. This can cause

serious electrical damage to the

unit, possible fire or explosion.

BATTERY MUST BE RECYCLED

OR DISPOSED OF PROPERLY.

Consult your local Yellow Pages direc-

tory under the category “Recycling” to

locate a battery recycler in your area.

H0600 12V Cordless Trimmer-4-

INTRODUCTION

Commentary Most importantly, we stand behind our

tools. If you have any service questions or

parts requests, please call or write us at

the location listed below.

Grizzly Industrial, Inc.

2406 Reach Road

Williamsport, PA 17701

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: [email protected]

Web Site: http://www.grizzly.com

To operate this, or any power tool,

safely and efficiently, it is essential to

become as familiar with its characteris-

tics as possible. The time you invest

before you begin to use your Model

H0600 will be time well spent. DO NOT

operate this tool until you are com-

petely familiar with the contents of this

manual. Make sure you read and

understand all of the safety proce-

dures. If you do not understand some-

thing, DO NOT operate the tool.

We are proud to offer the Grizzly Model

H0600 Cordless Trimmer. The Model

H0600 is part of a growing Grizzly family

of fine power tools. When used according

to the guidelines set forth in this manual,

you can expect years of trouble-free,

enjoyable operation and proof of Grizzly’s

commitment to customer satisfaction.

The Model H0600 offers a 12V motor and

cuts a 31⁄2" wide swath through most light

trimming applications. Switch lock keeps it

running without holding the trigger to avoid

stress and hand fatigue.

We are pleased to provide this manual

with the Model H0600. It was written to

encourage safety considerations and

guide you through general operating pro-

cedures and maintenance. It represents

our effort to produce the best documenta-

tion possible.

The specifications, details, and pho-

tographs in this manual represent the

Model H0600 as supplied when the manu-

al was prepared. However, owing to

Grizzly’s policy of continuous improve-

ment, changes may be made at any time

with no obligation on the part of Grizzly. If

you have any comments regarding this

manual, please write to us at the address

below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Operating this equipment has the

potential to propel debris into the air

which can cause eye injury. Always

wear safety glasses or goggles when

operating equipment. Be certain the

safety glasses you wear meet the

appropriate standards of the American

National Standards Institute (ANSI).

H0600 12V Cordless Trimmer -5-

BEFORE YOU START

The battery in your new cordless power

tool will not be fully charged when you

receive it. Follow the instructions below to

charge your battery.

Battery charging with the standard

charger :

1. Plug the power cord for the charger

into the 110/120V outlet.

2. Insert the battery into the charger.

The battery fits into the oval recess in

only one way. Do not force the bat-

tery. Insert until it locks into place.

3. The red LED light on the charging unit

will come on when the battery begins

its charging cycle.

4. Charge battery for 3-5 hours for a full

charge from a fully depleted condi-

tion. The red LED will not go off until

the battery is removed from the

charger base.

Fig 1. Location of controls.

On/Off Trigger

Trimmer

Blades

Rechargeable

Battery

Trigger Lock Button

Control Location

Refer to Figure 1 for the location of the key

components and controls of the machine.

Become familiar with the controls and all of

the adjustments and settings before oper-

ating the Trimmer

Operating Tips

Avoid overloading the trimmer by cutting

objects too large for the blades. A good

indication of motor stress is by listening to

the sound it makes. If the speed drops and

it sounds like the motor is struggling, it

probably is. Use common sense when

using this trimmer, and it will give you

many years of trouble-free service.

H0600 12V Cordless Trimmer-6-

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original

purchaser from the date of purchase. This warranty does not apply to defects due directly

or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of main-

tenance. This is Grizzly’s sole written warranty and any and all warranties that may be

implied by law, including any merchantability or fitness, for any particular purpose, are here-

by limited to the duration of this written warranty. We do not warrant or represent that the

merchandise complies with the provisions of any law or acts unless the manufacturer so

warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price

paid for the product and any legal actions brought against Grizzly shall be tried in the State

of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to persons or property or for incidental, con-

tingent, special, or consequential damages arising from the use of our products.

To take advantage of this warranty, contact us by mail or phone and give us all the details.

We will then issue you a “Return Number’’, which must be clearly posted on the outside as

well as the inside of the carton. We will not accept any item back without this number. Proof

of purchase must accompany the merchandise.

The manufacturers reserve the right to change specifications at any time because they con-

stantly strive to achieve better quality equipment. We make every effort to ensure that our

products meet high quality and durability standards and we hope you never need to use this

warranty.

Please feel free to write or call us if you have any questions about the machine or the man-

ual.

Grizzly Industrial, Inc.

2406 Reach Road

Williamsport, PA 17701

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail:

[email protected]

Web Site: http://www.grizzly.com

Thank you again for your business and continued support. We hope to serve you again

soon.

WARRANTY AND RETURNS

Name__________________________________________________________

Street__________________________________________________________

City____________________State________Zip_________

Phone Number____________E-Mail___________________FAX____________

MODEL # H0600 12V Cordless Trimmer Order#______________________

The following information is given on a voluntary basis. It will be used for marketing purposes to help

us develop better products and services. Of course, all information is strictly confidential.

WARRANTY CARD

9. How many of the machines checked above are

Grizzly? ____________

10. Which portable/hand held power tools do you own?

Check all that apply.

___Belt Sander ___Orbital Sander

___Biscuit Joiner ___Palm Sander

___Circular Saw ___Portable Planer

___Detail Sander ___Saber Saw

___Drill/Driver ___Reciprocating Saw

___Miter Saw ___Router

___Other_________________________________

11. What machines/supplies would you like Grizzly

Industrial to carry?

___12" Table Saw ___Radial Arm Saw

___12" Jointer ___Panel Saw

___Brass Hardware ___Lumber

___Paint & Finishing Supplies

___Contractor’s Supplies

___Combination Planer/Jointer

___Other_________________________________

12. What new accessories would you like Grizzly

Industrial to carry?

___Builders Hardware ___Hand Tools

___Fasteners

___Wood Components

___Other_________________________________

13. What other companies do you purchase your tools

and supplies from?

_________________________________________

14. Do you think your purchase represents good value?

___Yes ___No

15. Would you recommend Grizzly to a friend?

___Yes ___No

16. Would you allow us to use your name as a refer-

ence for Grizzly customers in your area? Note: We

never use names more than three times.

___Yes ___No

17.Comments:________________________________

_________________________________________

1. How did you learn about us?

___Advertisement ___Friend

___Catalog ___Card Deck

___World Wide Web

___Other__________________________

2. What is your annual household income?

___$20,000-$29,999 ___$60,000-$69,999

___$30,000-$39,999 ___$70,000-$79,999

___$40,000-$49,999 ___$80,000-$89,999

___$50,000-$59,999 ___$90,000 +

3. What is your age group?

___20-29 ___50-59

___30-39 ___60-69

___40-49 ___70 +

4. How long have you been a woodworker?

___0 - 2 Years ___8 - 20 Years

___2 - 8 Years ___20+ Years

5. How would you rank your woodworking skills?

___Simple ___Advanced

___Intermediate ___Master Craftsman

6. What stationary woodworking tools do you own?

Check all that apply.

___Air Compressor ___Panel Saw

___Band Saw ___Planer

___Drill Press ___Power Feeder

___Drum Sander ___Radial Arm Saw

___Dust Collector ___Shaper

___Spindle Sander ___Jointer

___Table Saw ___Lathe

___Mortiser ___Wide Belt Sander

___Horiz.Boring Machine

___Vacuum Veneer Press

___Other______________________________

7. How many of your woodworking machines are

Grizzly? _____________

8. Which benchtop tools do you own? Check all

that apply.

___1"x42" Belt Sander ___6" - 8" Grinder

___5" - 8" Drill Press ___Mini Lathe

___8" Table Saw ___8" - 10" Bandsaw

___Scroll Saw ___Disc/Belt Sander

___Spindle/Belt Sander ___Mini Jointer

___10"-12"Thickness Planer

___Other______________________________

FOLD ALONG DOTTED LINE

GRIZZLY INDUSTRIAL, INC.

P.O. BOX 2069

BELLINGHAM, WA 98227-2069

TAPE ALONG EDGES--PLEASE DO NOT STAPLE

Name________________________________

Street________________________________

City______________State______Zip_______

Send a Grizzly Catalog to a friend:

Indice

Altri manuali Grizzly Tagliabordi

Grizzly

Grizzly AHS 2420 Lion Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ET 3500 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 4500 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ERT 230 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly AHS 1852 Lion Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ERB 550-1MS Istruzioni per l'uso e l'installazione

Grizzly

Grizzly BHS 2670 E2 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly AHS 4055 Lion Set Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ERT 320 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 580-52 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 750-69 D Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 600-61 R Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS710-69R Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 900 L-Set Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ERT 530 R Manuale di servizio

Grizzly

Grizzly EHS 900 L Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 6000 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ERT 450/8 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly AHS 4055 Lion Set Istruzioni per l'uso e l'installazione

Grizzly

Grizzly AKHS 18-45 Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ART 4032 Lion Istruzioni per l'uso e l'installazione

Grizzly

Grizzly CH 1800 Li Istruzioni per l'uso e l'installazione

Grizzly

Grizzly ART 2420 Lion Istruzioni per l'uso e l'installazione

Grizzly

Grizzly EHS 500 T Manuale utente

Manuali Tagliabordi popolari di altre marche

MTD

MTD HT 51 E Manuale utente

McCulloch

McCulloch T22 LS Manuale utente

COCKRAFT

COCKRAFT PRO HL36-S Manuale utente

Peco

Peco Z Trimmer ZT-3000 Manuale utente

Solo

Solo 116 Manuale utente

Stiga

Stiga ST 1200 Manuale utente

Echo

Echo GT-225 - 10-09 Manuale utente

RedMax

RedMax BT17 Manuale utente

GreenWorks

GreenWorks STA806 Manuale utente

Parkside

Parkside PHSL 900 A3 Manuale utente

Gardeo

Gardeo PRO GPTHT2560 Manuale utente

Park

Park DT-810870 Manuale utente

Worx

Worx WG209 Manuale utente

Gardenline

Gardenline 43671/HTKS26 Manuale utente

Makita

Makita 3710 Manuale utente

Champion

Champion 100683 Manuale utente

Stihl

Stihl FS 311 Manuale utente

Efco

Efco STARK 38 Manuale