Groov-e GVSP480 Manuale utente

Wireless Portable Music System

Model : GVSP480

USER MANUAL

E-2

NOTE: CAUTION SYMBOLS ARE PRINTED ON REAR OF UNIT OR ACCESSORIES.

PLEASE REFER TO INSTRUCTION MANUAL.

PLEASE NOTE: YOU WILL FIND THE RATING LABEL FOR THIS PRODUCT LOCATED

ON THE REAR OF THE UNIT.

CAUTION: GROUNDING OR POLARIZATION: THE PRECAUTIONS SHOULD BE TAKEN

SO THAT THE WIDER BLADE OF THE AC PLUG (OF AC-ADAPTOR) MUST MATCH THE

SLOT IN RECEPTACLE "WALL SOCKET". (ONLY IF YOUR AC PLUG IS POLARIZED)

The lightning flash and arrowhead within the triangle is a warning sign

alerting you of "dangerous voltage" inside the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

To reduce the risk of electric shock, do not remove cover (or back). No

user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION:

The exclamation point within the triangle is a warning sign alerting you of

important instructions accompanying the product.

- KEEP MINIMUM DISTANCES (5cm) AROUND THE APPARATUS FOR SUFFICIENT

VENTILATION.

- THE VENTILATION SHOULD NOT BE IMPEDED BY COVERING THE VENTILATION

OPENINGS WITH ITEMS SUCH AS NEWSPAPER, TABLE-CLOTHS, CURTAINS ETC.

- NO NAKED FLAME SOURCE SUCH AS LIGHTED CANDLES SHOULD BE PLACED

ON THE APPARATUS.

- ATTENTION SHOULD BE DRAWN TO THE ENVIRONMENTAL ASPECTS OF BATTERY

DISPOSAL.

- THIS APPLIANCE/ APPARATUS IS INTENDED FOR USE IN A MODERATE CLIMATE

AND INDOOR USE.

EXCESSIVE SOUND PRESSURE FROM EARPHONES AND HEADPHONES CAN CAUSE

HEARING LOSS.

CAUTION : DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.

REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. BATTERY REPLACEMENT

MUST ONLY BE DONE BY A QUALIFIED PROFESSIONAL TECHNICIAN.

WHEN EL ECTROST ATIC DI SCHARGE ( ESD) OCCURS AT THE F RONT SURF ACE

(WHETHER METAL OR PL ASTIC) OR NEAR ANY PART OR ANY BUTTON OF THI S

UNIT, OR AT THE USB PORT AND/ OR SD- CARD SL OTS (IF THEY EXI ST ON THIS

PRODUCT), THERE MAY BE A POSSI BILITY THAT THE PRODUCT MAY STOP

OPERATION AND/ OR SHUT DOWN IMMEDIA TELY. THIS IS A NORMAL CONDI TION

AND INTENDED TO PROTECT THE UNI T AND INTERNAL COMPONENTS AGAINST

DAMAG E.

IN SUCH A CASE, PL EASE RESET THE UNI T (BY POWERING OFF THE UNI T AND

DISCONNECTI NG AND RECONNECTI NG AC-POWER SOURCE) TO REVERT THE

UNIT TO NORMAL OPERA TION.

ELECTROST ATIC DISCHARGE (ESD) PRECAUTION

CAUTION:

To reduce the risk of fire or electric shock or damage, do not expose this

appliance/ apparatus (including all it’s accessories such as AC-adaptor, etc.)

to dripping or splashing liquids, and no object filled with liquids should be

placed on the appliance/ apparatus (including all it’s accessories).

1. Main Speaker (Left & Right)

2. Slot for placing your Smartphone/ Tablet

3. Handle

4. Liquid Crystal Display

5. Volume Control Knob

6. Bass + Key

7. Bass - Key

8. Treble + Key

9. Treble - Key

10. Function Key Panel

11. Power Button

12. Tune - / Back Key

13. Play / Pause / Pairing Key

14. Tune + / Next Key

15. Function Key

16. 10 Song Skip Forward Key (MP3)

17. P-mode / FM mode Key

18. Stop / Program Key

19. Memory - / Folder - Key

20. Memory + / Folder + Key

21. Charging Indicator LED

22. USB MP3 Port

23. SD Card Slot

24. Pairing Indicator LED

25. Telescopic antenna

26. Headphone Jack

27. Auxillary Input

28. USB Charging Port

29. DC Input (Micro USB)

E-4

LOCATION OF CONTROLS

E-3

OPERATION

POWER SOURCE

IMPORTANT

SOUND CONTROL:

26 27 28 2925

6 7

Enlarge view of the

Function key panel:

12 13 14 15

19 20

21 22 23 24

- This unit runs via internal rechargeable Lithium-ion battery.

- It can be recharged from any standard USB port (eg. PC USB port.)

- It can be also recharged with the provided Micro-USB AC adaptor.

- Please ensure your country’s AC-voltage is within the AC-Adaptor’s voltage range.

- Insert the micro USB plug of the AC Adaptor into the Micro USB Socket at the back of the unit.

- Plug the AC adaptor into a wall outlet with AC power.

- Press “On/Standby” key to switch ON the unit.

- The unit is charging if the charging LED indicator is on.

- Once the unit has been charged, it can simply be unplugged and taken anywhere to be used.

- Total play time when fully charged is about 5-6 hours.

- When the unit is not being used, we suggest to keep it plugged in and charging.

FOR BEST RESULT, FULLY CHARGE THE UNIT BEFORE USE EACH TIME.

IF THE BATTERY IS FULLY DRAINED, PLEASE ALLOW IT TO RECHARGE

FOR A FEW HOURS BEFORE USE

- Adjusting loudness can be done by using the volume control on this unit and also the volume

control of the device you have already connected to (if using Bluetooth or AUX-Input Jack).

- You can also adjust the bass & treble knob (for stronger bass/ highs) for quality sound effect.

- To enhance the quality of music, this powerful sound system comes with two additional

equalization functions. At anytime during playback, you can use the Bass (b) and Treble (t)

button (+/-) for stronger bass / highs.

- The display will indicate the levels of the bass / treble (b/t), based on your adjustments.

IMPORTANT: If there is NO sound, ensure the volume on both devices is not set to 0.

FUNCTION KEY

Pressing the FUNCTION F Key repeatedly will allow you to see and select one of the different

source functions, as follows :

Bluetooth® WIRELESS PLAYBACK (A2DP Audio Streaming)

- This unit can wirelessly playback audio from any device with Bluetooth A2DP function.

- The wireless range is approximately within 10m (30Ft.)

- Simply pair your device (eg. Smartphone) to this unit to enjoy Wireless Audio Streaming.

How to pair your device to this unit:

- Make sure Bluetooth is switch ON in your Device (Smartphone/ Tablet).

- Switch on the speaker unit, and press “FUNCTION” key repeatedly until display shows BT.

- Once the PAIRING LED Indicator begins flashing, you will find the unit listed in the Bluetooth®

connection list of your device (eg. In your Smartphone or Tablet).

- Make connection on your device (eg. Press “CONNECT”).

- If asked for a pass code, enter “GVSP480.”.

- This is one-time event per device. To pair your unit with another device, please repeat the

above steps. The unit remembers up to 4 devices.

- There is no need to repeat this pairing procedure for up to 4 devices, even if unit is

powered off.

- The unit will also automatically pair with the LAST paired device if it is found when the unit

is powered ON and switched to Bluetooth® mode.

- Note that only one device can be paired at any given time, but the unit will remember up to

4 devices in memory.

- The PAIRING LED light will indicate the Bluetooth Status of the unit:

Searching LED flashes slowly

Pairing LED blinks faster

Connected LED stays on

STATUS PAIRING LED LIGHT

BT FM USB SD AUX

Bluetooth Radio MP3

player

MP3

player

Input

Jack

E-6

OPERATION

E-5

OPERATION

USB & SD CARD MEMORY PORTS (For MP3 PLAYBACK)

KEY

FUNC.

BACK

For USB thumb drive & SD Card

Skip to next song

+ 10

FOLDER +/ FOLDER -

PLAY/ PAUSE

P-MODE

Press repeatedly until “USB” or “SD” is displayed

Skips 10 tracks forward during MP3 play (USB / SD card)

Choose folder location on your USB/ SD Card (Not usable in RANDOM play mode)

Skip to previous song

USING THE FM RADIO

NOTE:

It takes time to “Open & Verify” a large USB-Drive/ SD-Card, and count all the song files.

If there are many files, it can take up to 60 seconds for this process.

IMPORTANT: REMOVAL OF USB DRIVES & SD CARDS

Never remove SD Cards or USB drives from the unit during playback.

Always STOP playback, then press “FUNCTION” key to switch to another mode (FM/BT/AUX)

before removing your USB/SD memory to prevent damage to your song files and memory

devices itself.

- Press “FUNC” key repeatedly until display shows FM.

- To improve radio reception, adjust position of the unit. To further enhance reception, extend the

telescopic antenna found at the rear of the unit.

- After tuning into a desired station, use “FM MODE” key to select (MONO/STEREO) mode.

- In some case, when the reception is poor, we highly recommend to use “MONO” mode for

better clarity.

Manual Frequency Adjustment (Scan Mode)

- Press & immediately release “TUNE+” or “TUNE-” key to manually adjust the radio frequency

1 step at a time.

- When the desired station is reached, it can be saved into one of the “MEMORY” positions.

(See “Radio Memory” section for further details).

Automatic Frequency Adjustment (Seek Mode)

- Press & Hold (For 2 seconds) “TUNE+” or “TUNE-” key to seek the next available radio station

frequency.

- When the desired station is reached, it can be saved into one of the “MEMORY” positions.

(See “Radio Memory” section for further details).

Radio Memory

- After tuning into a desired station, it can be stored into one of the 20 available memory positions.

- Short Press “PROG.” key to go to memory tuning mode. Display will show “P-01” (FLASHING).

- Press & release “MEMORY+” or “MEMORY-” key to choose the desired memory storage

position you would like to store into (P-01 to P-20).

- Short Press “PROG.” key again to confirm selection. The display will stop flashing.

Recalling a saved memory station

- Short press “MEM+”/ “MEM-” key to find a saved memory position.

- To erase a saved radio station, simply replace it with a new station in same memory position.

- The following chart shows how to use USB/SD mode:

Using Audio Line-in Connection (AUX-input)

- This unit comes with an Audio Line-input jack(Labelled Aux-Input), allowing you to connect a

device using an Auxillary cable.

- Connect your external device to this unit using a standard stereo headphone (3.5mm to 3.5mm)

cable.

- Press “FUNCTION” key repeatedly until display shows “AUX”.

- Switch on your external device & activate playback on it.

- Playback of external device will start momentarily. Adjust the volume control of the main unit

and your external device to the desired level.

- Playback control can be done only through your external device.

- Remember to switch off the unit when you finish using the external device.

USB charging port

This unit is equipped with a DC 5V USB charging port on the back panel. To utilize this feature,

simply connect the device you would like to charge (eg. Smartphone or Tablet) to a suitable USB

cable and plug it into the USB charging port. (This function is only active when the unit is plugged

into an AC adaptor). The external device will be charged automatically when it is successfully

connected, even during playback.

Start playback or pause playback

STOP Stop playback

- - -

Power Supply : ............... Rechargeable Lithium 3.7V/ 2100mAh X 1 PC. (Built-in)

Recharge Power : ........... USB 5V (500mA)

SPECIFICATIONS

NORMAL

PLAY

REPEAT

FOLDER

REPEAT

ALL

RANDOM

PLAY

FM STEREO INDICATOR

106.5

FM MHz

((( )))

Altri manuali Groov-e Impianto stereo

Groov-e

Groov-e GV-TT03 Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente