Grozone Control CO2 Meter Manuale utente
www.grozonecontrol.com
USER GUIDE
CO2 Meter
Portable CO2 Monitor
SETTING
Seng temperature unit
Seng altude unit
The default seng is Celsius "CELS". If you want to change the
temperature unit to Fahrenheit, slide the switch to select''
TEMP '', press blue knob and hold it for 5 seconds unl '' FAHr ''
appears on screen. Release the knob, the monitor is now in Fa-
hrenheit. If you want to return to Celsius, press blue knob and
hold it for 5 seconds unl "CELS" appears on screen release the
knob.
The default seng is zero. If you want to change the altude
unit, slide the switch to select '' CO2 '', press blue knob and hold
it for 5 seconds unl ''EL'' appears on the screen ,release the
knob and select the altude level between 0 and 9500 feet by
pressing the knob. Once the level has been chosen keep the
buon pressed unl "GOOD" appears on the display. The al-
tude level is now recorded.
0.0 = sea level
0.5 = 500 feet
1.0: 1000 feet
1.5: 1500 feet
Etc.
2
s
3
OPERATION MODE
3
To know the ambient CO2 level slide the switch to select "CO2".
The CO2 monitor warms up for 30 seconds before dispaying a valid
CO2 reading.
To know the ambient temperature, slide the switch to select
"TEMP".
To turn off the monitor slide the switch to select "OFF."
The monitor will automacally shut down aer 5 minutes of no
use, just click blue knob to restart it.
IMPORTANT NOTICE:
This step is not required for a new unit (factory calibrated). Verify CO2
sensor precision by exposing your unit to outdoor air every 6 months
(correct value stands between 300 and 500 ppm).
If you need to calibrate the sensor, please follow these instrucons. At
any me before the last step, the calibraon procedure may be can-
celled, causing the controller to return to normal operaon.
CO2 SENSOR CALIBRATION CO2 SENSOR CALIBRATION
4
Steps
IMPORTANT : Before beginning the calibraon , bring the
controller outdoor (fresh air being use as a reference) and
wait unl the reading is stable (2-3min). If the value on the
screen is around 350 to 450 ppm, YOU DO NOT NEED TO
RECALIBRATE YOUR UNIT.
1
Press knob and hold it for 10 seconds, unl "CAL" appears
on screen.
2
Release the knob, "CO2" and "CAL" appears on the screen
alternately (blinking).
CO2 SENSOR CALIBRATION
3
Click knob again, then "CAL" and "400" appears on the
screen alternately (blinking).
4
TO CALIBRATE: press knob and hold it at least 5 seconds,
unl "CAL" shows up on the screen (not blinking), then
release the knob.
IMPORTANT : If you "click" the knob without holding for 5
seconds, you will exit WITHOUT calibrang.
5
The calibraon process only takes a few seconds. When
completed, "CAL" and "GOOD" appear on the screen alter-
nately (blinking) for 5 seconds, then the controller returns
to normal operaon.
IMPORTANT : You MUST see "GOOD" on the screen at the
end of the calibraon process. If not, the calibraon has
FAILED. You need to go back to step 1.
CO2 SENSOR CALIBRATION
5
WARRANTY & CUSTOMER SERVICE
DO YOU HAVE A PROBLEM WITH YOUR CONTROLLER ? PLEASE READ
THESE INSTRUCTIONS CAREFULLY AND SAVE THEM FOR FUTURE
REFERENCE.
Technical Support is available Monday through Friday, from 8:00 AM to
8:00 PM, Eastern Time.
WARRANTY & CUSTOMER SERVICE
I think my controller is damaged, or it simply does not work as indi-
cated in the user guide, what should I do?
1. Contact us at 1-855-262-1800
2. Send us an EMAIL at ser[email protected]
3. VISIT our Technical Support Center at
www.grozonecontrol.com/techsupport.html
6
2. I’ve been through the troubleshoong steps. What do I do if I meet a
problem at any of these steps? Is my product covered by the
WARRANTY?
· Grozone controllers are covered by a 1-year warranty (*). We will
replace any DAMAGED PRODUCT WITH A BRAND NEW PRODUCT.
· Covered or not covered? We do not authorize the replacement of fully
working products nor altered (tampered) products. The Troubleshoong
steps will help you idenfy a damaged product. Do not hesitate to
contact us or contact your retailer to make sure the controller is not fully
working or damaged before returning it to the store.
· My product is not fully working or damaged, I want a replacement unit:
in order to get a replacement product, you MUST return all modules
and applicable accessories to the retailer. To avoid being charged for
the accessories, be sure to include all pieces. Thanks for your
cooperaon.
· Any Grozone Control product that is returned with obvious signs of user
neglect will not be covered by the warranty. Grozone Control exercises
the right to make final decisions in these maers.
(*)The warranty period begins from the date of purchase at the retail level.
The retailer/consumer must keep their proof of sale/purchase. Otherwise,
Grozone Control will consider the manufacturing date to apply the warranty
coverage.
IMPORTANT MESSAGE TO RETAILERS
Retailers must call Grozone Control to get authorisaon to replace the
defecve product and a RMA number.
1-855-262-1800
WARRANTY & CUSTOMER SERVICE WARRANTY & CUSTOMER SERVICE
7
GUIDE D’UTILISATION
CO2 Meter
www.grozonecontrol.com
Moniteur de CO2 portable
AJUSTEMENT DES PARAMÈTRES
Ajustement des unités de température
La valeur par défaut est Celsius ‘’CELS’’. Si vous désirez
changer l’unité de température en Fahrenheit, poussez
l’interrupteur pour séleconner ‘’TEMP’’, Appuyer 5 se-
condes sur le bouton bleu jusqu’à ce que
‘’FAHr’’apparaisse à l’écran relâchez le bouton le moni-
teur est maintenant en Fahrenheit. Si vous voulez revenir
en Celsius, appuyer 5 secondes sur le bouton bleu jusqu’à
ce que ‘’CELS’’apparaisse à l’écran relâchez le bouton.
Ajustement de l’altude
La valeur par défaut est zéro. Si vous désirez changer la
mesure de l’altude, poussez l’interrupteur pour sélec-
onner ‘’CO2’’, appuyez 5 secondes sur le bouton bleu
lorsque ‘’EL’’ apparait sur l’écran relâchez le bouton et
séleconnez le niveau d’altude entre 0 et 9500 pieds
en appuyant sur le bouton. Une fois le niveau choisi
tenez le bouton enfoncé jusqu’à ce que ‘’GOOD’’ appa-
raisse sur l’écran. Le niveau d’altude est maintenant
enregistré.
0.0 = niveau de la mer
0.5 = 500 pieds
1.0 : 1000 pieds
1.5 : 1500 pieds
Etc.
2
Indice
Lingue:
