Grundig CDM 900 Manuale utente

MICRO SYSTEM

CDM 900

DEUTSCH

3 Sicherheit und Informationen 13 CD-Betrieb

4 Auf einen Blick 16 Cassetten-Betrieb

8 Stromversorgung 18 Timer-Betrieb

9 Anschliessen 20 Informationen

10 Lautstärke/Klang 99 Service

10 Radio-Betrieb

22 Safety and information 33 CD mode

23 Overview 36 Tape mode

27 Power supply 38 Timer mode

29 Connection 40 Information

30 Volume/tone 99 Service

30 Radio mode

42 Sécurité, informations 52 Fonction CD

43 Vue d’ensemble 55 Fonction cassette

47 Alimentation en courant 57 Fonction horloge

48 Raccordements 59 Informations

49 Volume/son 99 Service

49 Fonction radio

61 Sicurezza e informazioni 71 Funzionamento CD

62 In breve 74

Funzionamento Cassetta

66 Alimentazione elettrica 76

Funzionamento Timer

67 Collegamento 78 Informazioni

68 Volume/suono 99 Service

68 Funzionamento Radio

80 Segurança e informações 90 Função CD

81 Vista geral 93 Função cassetes

85 Alimentação de corrente 95 Função timer

86 Ligação 97 Informações

87 Volume/som 99 Assistência a clientes

87 Função rádio

___________________________________________________________________

DEUTSCH

ENGLISH

FRANÇAIS

ITALIANO

PORTUGUÊS

Safety

To ensure that this device provides you with long-term satisfaction and

enjoyment, please observe the following instructions:

This device is designed for the playback of audio signals.

Any other use is expressly prohibited.

Protect the device from moisture.

When deciding where to place the device, please note that furniture surfaces

are covered by various types of varnish and plastic, most of which contain

chemical additives. These additives can corrode the device supports, leaving

residues on the furniture surfaces which can be difficult or impossible to

remove.

Do not use any cleaning agent, as this may damage the casing. Clean the

device with a clean, moist leather cloth.

Never open the device casing. The manufacturer accepts no liability for

damage resulting from improper handling.

Thunderstorms are a danger to all electrical devices. Even if the stereo

system is switched off, it can be damaged by a lightning strike to the mains

or the antenna cable. Always disconnect the mains and antenna plugs

during a storm.

Environmental note

As little material as possible was used for packaging your device.

Three types of material were used: Cardboard (box), polystyrene and

polyethylene (bag).

Please observe the local regulations for disposing of the packing material.

Information

This device is noise-suppressed according to the applicable EC directives.

This product fulfils the European directives 89/336/EEC, 73/23/EEC and

93/68/EEC.

This device conforms to the safety regulation DIN EN 60065 (VDE 0860)

and therefore the international safety regulation IEC 60065.

Never open the device casing. The manufacturer accepts no liability for

damage resulting from improper handling.

The type plate is located on the bottom of the device.

Technical and optical modifications reserved!

SAFETY, INFORMATION _____________________

UBS

ULTRABASSSYSTEM

PLLSYNTHESIZERTUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLEMICROSYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CDOPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

°C°C

UBS

ULTRABASSSYSTEM

PLLSYNTHESIZERTUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLEMICROSYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CDOPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

UBS

ULTRABASSSYSTEM

PLLSYNTHESIZERTUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLEMICROSYSTEM

PLAY/

PAUSE

STOP

MEMO.

DISPLAY

/RDS

UBS

ULTRABASSSYSTEM

PLLSYNTHESIZERTUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLEMICROSYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CDOPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

! SERVICE !! SERVICE !! SERVICE !

ANTENNAPHONES

AC~

Ω

ENGLISH

The device

General functions

STANDBY 88Switches the device on and off.

The red »STANDBY« indicator lights up when the

device is switched off (except in battery mode).

CD Selects the input source »CD«.

TUNER/BAND Selects the input source »TUNER«;

Selects the frequency bands »FM« or »MW«.

TAPE Selects the input source »TAPE«.

UBS For ”boosting” the bass.

DSC Selects the sound settings »FLAT«, »ROCK«, »POP«,

»JAZZ«, »DISCO«.

MEMO. For setting the clock and timer.

MODE/TIMER Switches Timer mode on and off.

+ VOLUME – Alter the volume.

PHONES Headphone jack

(ø 3.5 mm) on the top of the device.

DISPLAY/RDS In mains mode: temporarily lights up the display.

In battery mode: calls up the time and temporarily

lights up the display.

OVERVIEW ___________________________________________

UBS

ULTRA BASS SYSTEM

PLL SYNTHESIZER TUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLE MICRO SYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CD OPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

CD mode functions

CD OPEN/CLOSE .Opens and closes the CD compartment.

DISPLAY/RDS Switches from the elapsed track playing time to

the remaining track playing time.

MEMO. Calls up the function for creating a track

memory.

MODE/TIMER Calls up the Intro, Random, Repeat 1 and

Repeat All functions in succession.

ss s6 Press briefly to select the next track.

Hold down to search for a particular

passage.

5a aa Press briefly to select the previous track.

Hold down to search for a particular

passage.

eII PLAY/PAUSE Starts CD playback.

Pauses playback.

■ STOP Ends CD playback.

TUNER mode functions

MEMO. For storing radio stations.

5a aa ss s6 Hold down to start the station search.

Press briefly to change the frequency in small

steps.

DISPLAY/RDS Calls up RDS functions.

Tape mode functions (under the cover panel)

■

Opens and closes the tape compartment.

II Pauses recording or playback.

■Stops the drive functions.

rr Fast forwards the tape to the end.

ee Rewinds the tape to the beginning.

rStarts playback.

●Starts recording.

OVERVIEW ____________________________________________

UBS

ULTRA BASS SYSTEM

PLL SYNTHESIZER TUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLE MICROSYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CD OPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

STANDBY REMOTE

SENSOR

CDM-900

PORTABLEMICRO SYSTEM

TUNER

/BAND

STANDBY

PLAY/

PAUSE

MODE/

TIMER

MEMO.

DISPLAY

/RDS

UBS

ULTRA BASS SYSTEM

PLL SYNTHESIZER TUNER

STANDBY REMOTE

SENSOR

CDM-900

PORTABLE MICROSYSTEM

TUNER

/BAND

TAPE

UBS

STANDBY

CD OPEN

/CLOSE

PLAY/

PAUSE

STOP

DSC

MODE/

TIMER

MEMO.

DISPLAY

/RDS

ENGLISH

Connections and controls on the back of the device

(behind the cover panel)

RL+ – Connections for loudspeakers supplied.

R = right channel, L = left channel.

FM ANTENNA Antenna socket for the rooftop antenna or the

 FM 75 Ωtelescopic antenna.

● ●

For winding up the loudspeaker cables.

FM BEAT CUT

STEREO 2 Switch for FM stereo or mono reception

1and reducing interference while recording

MONO 0 MW radio programmes (Beat Cut).

OPTICAL OUT Audio signal output for copying a CD onto a

digital recording device.

AC ~Mains socket for connecting the mains cable.

The only way to disconnect the device from the

mains supply is to pull out the plug.

OVERVIEW ____________________________________________

ANTENNAPHONES

R L

IMPEDANCE : 3.2 Ohm [Ω]

BEAT

CUT

OPTICAL

OUT

- 2

- 1

- 0

STEREO

MONO -

FM ANTENNA

FM 75 Ω

The remote control

The remote control has a magnet with which it can be attached

to the top of the device.

However, please note that the magnet can damage data on

disks, tape recordings etc.

STANDBY 88Switches the device on and off.

In battery mode the »STANDBY 88«

button can only be used to switch off

the device.

PLAY/PAUSE Starts CD playback.

eII Pauses playback.

STOP ■Ends CD playback.

UBS For ”boosting” the bass.

DSC Selects the sound settings »FLAT«, »ROCK«,

»POP«, »JAZZ«, »DISCO«.

pVOLUME oAdjusts the volume.

R-SKIP F-SKIP In Tuner mode: calls up the previous or

DOWN PRESET UP next preset station.

In CD mode: selects the next or previous track.

Hold down to search for a particular passage.

SLEEP Activates the sleep timer function.

MODE/TIMER Switches Timer mode on and off.

TUNER/BAND Selects the input source »TUNER«.

Selects the frequency bands »FM« or »MW«.

CD Selects the input source »CD«.

Inserting the batteries in the remote control

1Open the battery compartment by twisting off the lid.

2When inserting the batteries (micro type, for example, AAA, UM4, R03)

observe the polarity marked on the base of the battery compartment.

Note:

If the device no longer reacts properly to remote control commands, the

batteries may be flat. Always remove flat batteries. No liability is

accepted for damage resulting from leaking batteries.

Environmental note:

Batteries, including those which are heavy metal-free, may not be

disposed of with household waste. Please dispose of used batteries in

and environmentally sound way, for example at public collection points.

Find out about the legal regulations which apply in your area.

OVERVIEW ____________________________________________

STOP

PLAYPAUSEPAUSE

UBS

DSC

R-SKIP

/DOWN PRESET F-SKIP

/UP

SLEEP

MODE/

TIMER

TUNER

/BAND

STANDBY

OPEN

ENGLISH

Mains operation

Note:

Check if the mains voltage on the type plate (on the bottom of the

device) corresponds to your local mains supply.

The only way to disconnect the device from the mains supply is to pull

out the plug.

1Plug the mains cable supplied into the socket »AC ~« on the device.

2Insert the mains cable plug into the mains socket.

Battery operation

Note:

Remove the batteries when they are flat or when you know that the

device will not be used for a long period of time. No liability is accepted

for damage resulting from leaking batteries. The batteries are switched

off during mains operation.

Environmental note:

Batteries, including those which are heavy metal-free, may not be

disposed of with household waste. Please dispose of used batteries in

and environmentally sound way, for example at public collection points.

Find out about the legal regulations which apply in your area.

1Unplug the mains cable from the device and remove the cover panel on

the back of the device by pressing the snap-catches and removing the

lid.

2Insert eight batteries (C-cell, LR14 or AM2), observing the polarity

marked on the bottom of the battery compartment.

Memory back-up batteries

In order to preserve saved settings while the device is switched off, two

additional back-up batteries must be inserted. Insert the batteries

(Alkaline AAA R03/UM4) into the battery compartment. These batteries

must always be inserted, regardless of the power supply (network or

battery operation).

POWER SUPPLY___________________________________

ANTENNAPHONES

R L

IMPEDANCE : 3.2 Ohm [Ω]

BEAT

CUT

OPTICAL

OUT

- 2

- 1

- 0

STEREO

MONO -

FM ANTENNA

FM 75 Ω

ANTENNAPHONES

AC~

Ω

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved moulded 13 Amp plug. To change

a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI

approved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and

an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a

plug without a fuse is used, the fuse at the distribution board should not be

greater than 5 Amp.

Note:

The severed plug must be disposed to avoid a possible shock hazard

should it be inserted into a 13 Amp socket elsewhere.

How to connect plug

The wires in the mains lead are coloured with the following code: blue =

neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying

the terminals in your plug, proceed as follows:

1Connect the blue wire to the terminal marked N or coloured black.

2Connect the brown wire to the terminal marked L or coloured red.

3Do not connect either wire to the earth terminal in the plug, marked E

(or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped

over the sheath oft the lead – not simply over the two wires.

POWER SUPPLY ______________________________________

Altri manuali per CDM 900

Indice

Altri manuali Grundig Impianto stereo

Grundig

Grundig M 27-C Manuale utente

Grundig

Grundig VERTIGA UMS 5100 Manuale utente

Grundig

Grundig DMS601 IP Manuale utente

Grundig

Grundig M 19-C Manuale utente

Grundig

Grundig RR 630 CD Manuale utente

Grundig

Grundig CDM 900 Manuale utente

Grundig

Grundig Ovation CDS 7000 DEC Manuale utente

Grundig

Grundig CMS 1000 BT Guida rapida

Grundig

Grundig Ovation 3 Manuale utente

Grundig

Grundig RCD8300 Manuale utente

Grundig

Grundig M 25 Manuale utente

Grundig

Grundig M 100-CDC Manuale utente

Grundig

Grundig MF 2000 BT Manuale utente

Grundig

Grundig CDM3000 Manuale utente

Grundig

Grundig CDM 700 Manuale utente

Grundig

Grundig FREAXX 50 Manuale utente

Grundig

Grundig 01M-GLR7640-4320-07 Manuale utente

Grundig

Grundig UMS 12-S Manuale utente

Grundig

Grundig CDS 5000 DEC Manuale utente

Grundig

Grundig CMS 1050 DAB+ Manuale utente

Grundig

Grundig UMS 200 Manuale utente

Grundig

Grundig VERTIGA UMS 4600DEC Manuale utente

Grundig

Grundig Satellit 2400 Manuale utente

Grundig

Grundig FINA ARTS AUDION Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente