3
1. General Information
Warranty information and how to use the Lamellar Grinding Machines T-20/25
The user manual must be read carefully prior to operate the machine.
Before bringing the machine into service it is essential to check:
Is the machine placed safely? Is the direction of the rotation correct?
The machine must only be connected by a qualified electrician!
1.1 Use and maintenance of the Lamellar Grinding Machines T-20/25
- In the event of unauthorized electrical installation, faulty operation, improper use
according to instructions, structural alterations, removal of protective equipment,
use of Non-ORIGINAL spare parts and accessories, we disclaim any liability. The user
employs our machines at own risk and peril in such cases. If any damage occurs
because of this, the user bears full responsibility himself. -
- Do use only GENUINE spare parts and accessories!
- Defects and damages caused by natural wear and tear do not constitute any claims
against Geiselsöder GS-Schleiftechnik.
- The operator has to be carefully instructed to follow this manual in the operation
and maintenance of T-2 w / d Lamellar Grinding Machines.
- Geiselsöder GS-Schleiftechnik machines fully comply with accident prevention
regulations.
Pay attention to instructions and memorize them!
In line with our warranty conditions we grant warranty for 24 months for the
Geiselsöder GS-Schleiftechnik Lamellar Grinding MachinesT-20/25. The
illustrated presentations of the machines may, according to country-specific
regulations and as a result of technical progress of the machines supplied,
slightly differ. This however is of no influence to our manual.
1.2 Description and Features
The T-20/25 Lamellar Grinding Machines serve to sharpen cutting tools such as:
- Cutting knife
- Cutter knife
- boning Knife
- Cleaver
in the butcher and catering area
