GSI Group PNEG-1405 Manuale utente
Moisture Controller
Installation Manual
PNEG-1405
Version: 2.0
Date: 03-09-16
PNEG-1405
2PNEG-1405 Moisture Controller
All information, illustrations, photos and specifications in this manual are based on the latest
information available at the time of publication. The right is reserved to make changes at any
time without notice.
Table of Contents
PNEG-1405 Moisture Controller 3
Contents
Chapter 1 Safety .....................................................................................................................................................4
Safety Guidelines .................................................................................................................................. 4
Safety Instructions ................................................................................................................................. 5
Chapter 2 Component Installation .......................................................................................................................7
Chapter 3 Electrical Connections .......................................................................................................................12
Chapter 4 Warranty ..............................................................................................................................................17
4PNEG-1405 Moisture Controller
1. Safety
Safety Guidelines
This manual contains information that is important for you, the owner/operator, to know and understand.
This information relates to protecting personal safety and preventing equipment problems. It is the
responsibility of the owner/operator to inform anyone operating or working in the area of this equipment
of these safety guidelines. To help you recognize this information, we use the symbols that are defined
below. Please read the manual and pay attention to these sections. Failure to read this manual and its
safety instructions is a misuse of the equipment and may lead to serious injury or death.
DANGER
WARNING
CAUTION
CAUTION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
This symbol indicates a potentially hazardous situation which,
if not avoided, may result in serious injury or death.
This symbol indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
This symbol indicates a potentially hazardous situation
which, if not avoided, may result in property damage.
This symbol indicates an imminently hazardous situation
which, if not avoided, will result in serious injury or death.
1. Safety
PNEG-1405 Moisture Controller 5
Safety Instructions
Our foremost concern is your safety and the safety of others associated with this equipment. We want to
keep you as a customer. This manual is to help you understand safe operating procedures and some
problems that may be encountered by the operator and other personnel.
As owner and/or operator, it is your responsibility to know what requirements, hazards and precautions
exist and to inform all personnel associated with the equipment or in the area. Safety precautions may be
required from the personnel. Avoid any alterations to the equipment. Such alterations may produce a very
dangerous situation where SERIOUS INJURY or DEATH may occur.
This equipment shall be installed in accordance with the current installation codes and applicable
regulations, which should be carefully followed in all cases. Authorities having jurisdiction should be
consulted before installations are made.
Follow Safety Instructions
Carefully read all safety messages in this manual and
safety signs on your machine. Keep signs in good
condition. Replace missing or damaged safety signs. Be
sure new equipment components and repair parts include
the current safety signs. Replacement safety signs are
available from the manufacturer.
Learn how to operate the machine and how to use controls
properly. Do not let anyone operate without instruction.
Keep your machinery in proper working condition.
Unauthorized modifications to the machine may impair
the function and/or safety and affect machine life.
If you do not understand any part of this manual or need
assistance, contact your dealer.
Read and Understand Manual
Prepare for Emergencies
Be prepared if fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctors, ambulance service,
hospital and fire department near your telephone. Keep Emergency Equipment
Quickly Accessible
1. Safety
6PNEG-1405 Moisture Controller
Wear Protective Clothing
Wear close-fitting clothing and safety equipment appropriate
to the job.
Remove all jewelry.
Tie long hair up and back.
Wear safety glasses at all times to protect eyes from debris.
Wear gloves to protect your hands from sharp edges on
plastic or steel parts.
Wear steel toe boots to help protect your feet from falling
debris. Tuck in any loose or dangling shoestrings.
A respirator may be needed to prevent breathing potentially
toxic fumes and dust.
Wear a hard hat to help protect your head.
Wear appropriate fall protection equipment when working at
elevations greater than six feet (6').
Eye Protection
Gloves
Steel-Toed Boots
Respirator
Hard Hat
Fall Protection
PNEG-1405 Moisture Controller 7
2. Component Installation
Location for the Moisture control box second and
third leg back from dryer control box.
Figure 2A
Moisture control box leg channel. (D01-1656)
Figure 2B
Moisture control box leg channels installed.
Figure 2C
2. Component Installation
8PNEG-1405 Moisture Controller
1. Install moisture control box leg channels on the dryer at the second and third legs back
from the dryer control box using 3/8"-16 x 1" flanged bolts and 3/8"-16 flanged nuts as shown in
Figure 2C.
Moisture control box installed. (D03-0552)
Figure 2D
2. Install moisture control box onto leg channels installed in Step 1 using 3/8"-16 x 1" flanged bolts and
3/8"-16 flanged nuts as shown in Figure 2D.
3. Install the moisture sampler assembly as shown in the installation manual PNEG-1283.
Figure 2E Moisture sampler assembly installed on the discharge box.
2. Component Installation
PNEG-1405 Moisture Controller 9
Figure 2F Moisture Sensor (602E020) Figure 2G
4. The Moisture Sensor (See Figure 2F and See Figure 2G.) latches (C) to the sample tube of the
Moisture Sampler assembly (installed in Step 3 on Page 8) as shown in Figure 2H.
Figure 2H Moisture sensor installed.
5. Connect the ground wire (A) for the Moisture Sensor to the rear auger bearing plate as shown
in Figure 2H.
6. Run the shielded wire (B) connected to the Moisture Sensor through the grey flex conduit supplied.
Connect the conduit to 90° conduit connector already installed on the Moisture Sensor.
Ref # Description
AGround Wire Connection
B Shielded Wire
CLatch
AB
C
2. Component Installation
10 PNEG-1405 Moisture Controller
Figure 2I Grey flex conduit routing
7. Connect another 90° conduit connector to the other end of the grey flex conduit and connect that to
the white junction box on the leg gusset as shown in the Figure 2I, then feed the shielded wire down
the EMT conduit forward to the “T” junction box. Then feed shielded wire through the black flex
conduit and connect conduit to the Moisture Manager control box.
8. To mount the plenum thermocouple, knock out one of the prepunched wholes in either the front or
rear column end panels. Be sure to knock out a hole for the plenum and not the grain column.
Figure 2J Figure 2K Plenum Thermocouple (602E181)
Where to install the Plenum Thermocouple. The Figure 2J and Figure 2K is showing the right rear side of
the dryer (near the rear access door).
Ref # Description
DSecure conduit with conduit clamp here
D
Ref # Description
EPlenum knockout holes
E
Indice
Altri manuali GSI Group Controllori
