GTD-AMP8-R User Manual
6
Control panel
Panel description
LED indicators:
Power LED: When power is applied to the fixture, the Red power LED indicator will come on.
DMX input: When the fixture is receiving a DMX signal through the XLR connector, the Green DMX input
indicator will come on.
DMX Output. When the fixture is receiving a DMX signal, the eight DMX output indicators will come on in
Green.
Wireless signal: (please see below section 3 for details).
Functions description
Input: DMX512 signal or wireless signal. W512TX-4 wireless transmitter should be used for a wireless signal
communication.
Output: DMX512 signals of 8 ways are non-interference, capable of shaping signals for long-distance transmission.
Distance for wireless signal communication: radius of 250m (in open space).
Interface type: 5 or 3 pins XLR can be selected.
Signal isolation: DMX512 signal input, DMX signal output, power and signal are isolated.
Wireless antenna must be pointing upwards when in use (see below).
Wireless function description
Device: When using the wireless receiving function, the necessary devices are DMX512 console, wireless
transmitter and lighting equipments.
Connection:
Connect the fixture to AC power when the red power LED indicator is on.
Connect the lighting equipments to the DMX outputs of the fixture (AMP8-R).
Connect the wireless transmitter to the signal output of any DMX-512 console, no need to connect any signal
cable between the console and the lighting equipment, the DMX-512 control system will be built between the
console and the lighting equipments.
Wireless signal Indicators
When indicator flashes fast in red and green, it means transmitter is searching for a receiver；and means
transmitter and receiver are searching for each other;
