Guild CAP110D-12 Manuale utente
GUILD
12V CORDLESS INFLATOR
Instruction Manual
Important - Please readthese instructions fully before operating or maintaining your Guild cordless inflator
Theseinstructions contain important information that will help you get the best from your Guild
cordless inflator,ensuring it remains safe to operate.
If you need help orhave damaged ormissing parts, call the Customer Helpline on
After Sales Support
CAP110D-12
0345 640 0800
UK/Ireland 0345 640 0800
1
Contents
Safety Information.....................................................................................................2
In The Box..................................................................................................................7
Accessories................................................................................................................7
Operating Instructions...............................................................................................8
Customer Helpline 0345 640 0800
Maintenance .............................................................................................................10
Trouble Shooting......................................................................................................11
Technical Data ..............................................................................................................11
Environment.............................................................................................................12
Guarantee.................................................................................................................13
2
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
The following warning symbols appear throughout this assembly manual and
indicate the appropriate safety measures you should take when assembling and
operating the cordless inflator.
To reduce the risk of injury, Please read the instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Indoor use only
Do not expose to rain or water
Do not burn
Li-ion battery. This product has been marked with a symbol relating to ‘separate
collection’ for all battery packs and battery pack. It will then be recycled or
dismantled in order to reduce the impact on the environment. Battery packs can be
hazardous for the environment and for human health since they contain hazardous
substances.
Avoid using tool in temperature of 45°C or more.
Li-Ion Li-Ion
Customer Helpline 0345 640 0800
max45°C
：
3
Customer Helpline 0345 640 0800
GENERAL POWER TOOL SAFETY WARNINGS
Safety Information
Customer Helpline
4
Safety Information
GENERAL POWER TOOL SAFETY WARNINGS
0345 640 0800
§
§
§
8Bar (116PSI).
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
§
0.2-8bar (3.0-116PSI) +/- 0.05bar (1.0PSI).
§
§
Tool
§
§
§
5
Customer Helpline 0345 640 0800
Safety Information
ADDITIONAL SAFETY INSTRUCTIONS
Customer Helpline
6
Safety Information
§
§
§
§
§
§
§
§
§
§
o
o
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGERS
0345 640 0800
45
60
60
“Environment”.
§
7
Customer Helpline 0345 640 0800
In The Box
Accessories
Battery Pack (1.3 Ah Li-ion)
Charger (3-5 hours)
12V Car Power Supply
Airbed nozzle
Ball needle
1pc
1pc
1pc
1pc
1pc
Pneumatic Hose
Hose Storage Area
Digital Pressure Gauge
Charger
Airbed Nozzle
Ball Needle
12V Car Power Supply
Car Power Supply Release Button
Battery Pack
Air Chuck
Battery Pack Release Button
LED Light
Lock Button
On/Off Switch
12V Car Power Supply Plug
2
6
5
4
3
1
7
8
9
10
11
12
13
14
15
BAR
2.40
2
6
5
3
1
7
9
10
11
8
4
13
12
14
15
Customer Helpline
8
Operating Instructions
The appliance is intended for inflating car and bicycle tyres and inflatable items for games, sport and
leisure, but not for pumping up inflatable items with a larger volume, such as inflatable boats and very
large air beds.
The appliance is not intended for professional use.
Note: Charge at room temperature. The ambient temperature must be between 0°C and 45°C.
Note: Do not charge if the charger's cord or plug is damaged. Charging with a damaged cord may
result in fire or electrical shock. If the charge is damaged in any way, have it repaired by a qualified
seviceman.
Note: Do not short circuit the terminal of the battery. Take care that metal such as paper clips, nail,
the sides of matal tools boxes, etc, which cause a short circuit in your battery. Extremely high
temperatures and fire can result.
Note: Improperly attached hoses or accessories can become detached under pressure and cause
serious injury.Possible air leaks can cause faulty pressure readings. Make sure all connections are
tightly secured.
Charge the battery with the charger
Connect the charger to the household power socket.
Connect the outlet socket of the charger to the battery
charging port A. The battery will start to charge.
The battery indicator lights( 3 blue LEDs) at the rear
of the battery pack will twinkle while the battery is
being charged. They will gradually (from left to right)
be lighted.
The three blue LED lights will be lit stably, when the
battery is fully charged.
A
4
4
4
9
11
A
0345 640 0800
Battery Capacity Status
30%
70%
100%
9
11
Install and remove battery pack
To install: Align the ribs on the battery pack with the
grooves in the battery ports. Slide the battery pack
in the tools base until in locks (click) in place.
Make sure the latch on the battery pack snaps into
place and that the battery pack is secured in the tool
before operating.
To remove: Pushing the battery pack release button
at the front of the battery pack to release the battery
pack and remove it from the tool.
9
9
Customer Helpline 0345 640 0800
Operating Instructions
Lock and unlock air chuck
Before inflating, make air chuck clamp in unlocked position. Then put on the tire valve and lock the
air chuck.
Start inflating
Press the On/Off switch to start inflating. (If the lock button
is in upper position, slide it down.)
When the pressure reaches the pre-set pressure value, the
tool will stop inflating
Note: To reset the tire pressure measurement unit, press the
"On/Unit" button to reselect after setting pre-set pressure value.
Note: The digital pressure gauge records the last pre-set
measurement unit and value.
Note: After the inflator has reached the pre-set pressure valve,
the digital gauge will go out after 30 seconds, and the tool will
turn off automatically.
Lock button : The On/Off switch can be locked in the On position. To do so, slide the lock on
upwards, while pressing the On/Off switch, then release the On/Off switch while keeping the lock
on button in it’s upper (lock) position. The device can be inflating by continuous mode.
This is convenient when inflator has to inflate for an extended period of time.
To stop continuous mode, push the On/Off switch once. The lock button will turn back to its
unlock (lower) position.
Air chuck clamp in unlocked position Air chuck clamp in locked position
13
14
BAR
2.40
3
Digital Display Gauge
Press the "On/unit" button on the digital display gauge
at the rear of the machine to read the current tire pressure
Press the "On/unit" button again to select tire pressure
measurement unit. (PSI, KPA, BAR & KG/CM.)
Press the "+" or "-" button to adjust the pre-set tire pressure
to the required tire pressure.
The pressure gauge on the inflator is for reference only and
may not reflect exact values.( range /accuracy is 0.2-8bar
(3.0-116.PSI) +/- 0.05bar (1.0PSI). To reduce the risk of
overinflation, use a second pressure gauge during inflation
(from time to time).
3
13
14
10
13
14
13
10 10
10
Indice
Altri manuali Guild Utensili elettrici
Guild
Guild PHG200GL Guida utente
Guild
Guild PMF250G Manuale utente
Guild
Guild PPL900GH Manuale utente
Guild
Guild PSJ550GL Manuale utente
Guild
Guild PRT210GH Manuale utente
Guild
Guild PMF300GH.1 Guida utente
Guild
Guild PSJ700G Manuale utente
Guild
Guild PSJ750GH Manuale utente
Guild
Guild PRT150G Manuale utente
