Installation instructions BC-C-00-00-00-01-BAEN Page
1 Introduction..........................................................5
1.1 Brief description 5
1.2 Type approval 5
1.3 Further information 5
2 Important notes....................................................6
2.1 Intended use 6
2.2 Operating the heating system 6
2.3 Guarantee and liability 6
2.4 Safety instructions 7
3 System components..........................................11
3.1 Cutaway diagram of BIOCOM 11
4 Safety systems...................................................12
5 Description of control panel .............................13
6 Overview of menu and levels............................14
6.1 Information level 15
6.2 House level 16
6.3 User level 16
6.3.1 Heating Circuit menu 17
6.3.2 Hot Water menu 17
6.3.3 Heating Circuit menu 18
6.3.4 Boiler Cascade menu 18
6.3.5 User menu 19
6.3.6 Detail View menu 19
6.3.7 Date/Time menu 19
6.4 Service level 20
6.4.1 Service menu Reset Data 20
6.4.2 Service menu Error List 20
6.4.3 Service menu Begin Service 21
6.4.4 Service menu Heating Circuit/Screed Drying Prog. Parameters 23
6.4.5 Service menu Hot Water Parameters 23
6.4.6 Service menu HP0 Parameters 24
6.4.7 Service menu District Heating Pipe Parameters ZUP 25
6.4.8 Service menu District Heating Pipe Parameters PUP 25
6.4.9 Service menu District Heating Pipe Parameters LAP 25
6.4.10 Service menu System Settings 26
7 User settings ......................................................27
7.1 Activating a heating programme 27
7.2 Deactivating a heating programme 28
7.3 Setting a timer programme 29
7.3.1 Programming en bloc 29
7.4 Changing the heating characteristic 30
7.5 Changing the hot water temperature setting 31
7.6 Analogue room stat 32
7.7 Digital room controller 32
