Gyration Cyberview3000 Manuale utente
Smart Video Doorbell kit
User manual
Cyberview3000
1. Doorbell*1
2. Mounting bracket*3
3. Use instructions*1
4. USB power cord*1
5. Installation screw kit
(Spare and expansion plugs)*1
6. 3M Adhesive for flat support*1
7. Removal Pin*1
8. Installation wire kit*1
9. Wiring cap (optional)*1
10. Indoor chime kit*1
Packing list
01
Removal hole
Infrared
light
Microphone
Lens
Indicator
light
human body
Infrared sensor
Doorbell
button
Speaker
Port micro-USB
Power button
Micro-SD card
slot
Reboot hole
Exploded views of
functional
interface on both
left and right sides
without flat support
Product appearance
Doorbell
02
Volume
plus
Volume
reduction
Pairing
selection
Pairing
Indicator
light
Speaker
Micro-USB port
Chime
03
Quick Start
Android
Download
Download
App Store
Download and install the app
Adding the doorbell
The smart doorbell supports both wireless battery
power supply and wired powersupply.
The doorbell can be connected and operated via smart
phones running on both Android and iOS platforms. For your
best experience, please scan the QR code below, download
and install the App and follow the instructions to complete
user registration.
Login to the app and follow the instructions to connect
Wi-Fi and add the doorbell (please keep the doorbell close
to the router when it is configured).
Scan the QR code or go to the link to download
and install the app:
https://www.cyberviewplus.com/download/
04
05
Connecting the chime
1) Connecting the doorbell chime with a charger
The power button can control the doorbell on/o function
or enter the network configuration mode. You need to first
remove the doorbell from the bracket before the button can
be pressed.
Connect the doorbell chime to the power supply of 5V/1A~
5V/2A, and the doorbell chime will ring once.
2) Bringing your doorbell close to the chime
Move the doorbell within 2 meters of the doorbell Chime, so
that the doorbell and the doorbell chime can be paired
stably.
Power on/o and
network configuration
Installation and use of the device
must be in strict accordance with
your local electrical safety regulations.
Use a UL certified power supply
that meets LPS requirements if
an adapter is used.
Use the recommended cordset
(power cord) in accordance with
the specified ratings.
DC-5 V
Power button
< 2m/7ft
06
3) Putting the doorbell chime into sync state
Press and hold the "SYNC" button on the side of the doorbell
chime until the indicator light flashes.
4) Synchronizing the doorbell with the chime
Press and hold the doorbell button for 6 seconds, the
doorbell will ring twice, send a connection signal, and the
doorbell chime will ring.
5) Connection Successful
Press the doorbell button for testing. When a chime rings, it
indicates that the connection is successful.
07
Doorbell binding
1) Click the "Add Now" button in the app, press and hold the
doorbell switch button for 3 seconds to turn on the
doorbell, and the app will automatically search for devices
that are on and not bound. Select the device you want to
bind in the search results for the next step.
2) For users who need to be shared with, click "+" on the
homepage and select "Add Friend's Device" to enter the
scan code page.
To ensure a long-distance connection, the doorbell only
supports a 2.4 GHz Wi-Fi network with stronger wall
penetration capability and does not support Wi-Fi with
enterprise-level authentication. Please make sure that
your Wi-Fi meets the requirements.
3) After a while, the doorbell will play a sound indicating that
the connection is successful. At this point, please set a
name for the doorbell on the app and select the location
where you want to place the doorbell. Click Finish to
complete the pairing.
08
Doorbell sharing
You can use this feature when you need to use the doorbell
with other family members or friends. Only the admin user
who has bound the doorbell for the first time can share and
set up the doorbell, while other members can only view the
live video or video playback feature of the doorbell.
1) For admin user of the doorbell, find the doorbell you wish
to share on the app homepage or doorbell settings screen,
then click the share button and enter the Share page. Click
"Device Sharing" to generate a shared QR code.
Possible problems with binding:
When you hear the "Password error", please check
whether the Wi-Fi password you entered in the App is
correct.
When you hear the "Authentication method error", please
make sure that your Wi-Fi network is not in an
enterprise-level network connection mode, as the
doorbell only supports networks with a security level
below WPA-2.
When you hear the "AP does not exist", please check if you
have selected or entered the correct Wi-Fi name. Please
place the doorbell near the Wi-Fi router and make sure the
router is powered on. Also, please note that 5 GHz Wi-Fi
cannot be searched by the doorbell either.
When you hear the "IP acquisition timeout", it means that
you have too many devices connected to the router and to
connect more devices, please delete some infrequently
used devices or reboot the router to clear the unconnected
doorbell whose lease has expired, and you may need to
contact the router administrator.
When you hear the "Server connection failed", please
check if your router is properly connected to the external
network. This is usually the case when your home network
is disconnected or the router you choose is a server on the
LAN. Please make sure the network connection is normal,
and try to connect again by temporarily turning o the
firewall.
09
3) After the shared user
successfully scans the QR
code on the admin user's
mobile phone, the admin
user will receive a
confirmation notification,
then click "Accept" to
complete the doorbell
sharing.
2) For users who need to be shared with, click "+" on the
homepage and select "Add Friend's Device" to enter the scan
code page.
Installation
Your doorbell comes with a built-in
battery pack, and it also works with
the existing 8V~24V AC hardwire
power source. It enables you to
make use of your legacy doorbell
wiring for retrofitting installation.
Retrofitting installation (optional)
To replace your existing doorbell, please follow below
installation steps:
1) Shut o the master circuit breaker in your house.
Failure to turn o your power might result in serious
injury.
Use a multimeter to test the voltage.
Check if the voltage is printed on the
transformer that supplies power to
your existing doorbell.
Indice
Lingue:
