GYROZEN HyperCOOL HC8080 Manuale utente
Operating Manual
HyperCOOL
HC8080
Freeze Dryer
HyperCOOL
HC8080 - Freeze Dryer-
© 2018 GYROZEN
If you have any questions, contact our Technical Support Center.
+82-2-3452-8966 / [email protected]om
www.gyrozen.com
The appearance or specications of the device is subject to partial change for improvement.
UM-G_HyperCool_8(E)(Rev.0)
INDEX
0. Intended Use ------------------------------------------- 4
1. Safety Precautions ------------------------------------ 5
1.1 Safety Labels on the Device - 5
1.2 Environmental Conditions - 5
1.3 Safety Precautions - 6
2. Product Description ---------------------------------- 7
2.1 Product Description - 7
2.2 Delivery Package - 8
2.3 Technical Specications - 9
3. Installation ---------------------------------------------- 10
3.1 Wheel Lock - 10
3.2 Switching On the Device - 10
4. Operation ---------------------------------------------- 11
4.1 Key Functions of Control Panel - 11
4.2 Performance Properties - 12
4.3 LCD Display - 12
4.4 Defrost - 13
4.5 Vacuum - 14
4.6 Time - 15
4.7 Keylock - 16
5. Maintenance ------------------------------------------- 17
5.1 Outer Part of the Instrument - 17
5.2 Inside the Chamber - 17
5.3 Removing Dirt on the Condenser - 17
6. Troubleshooting -------------------------------------- 18
6.1 Possible Problems - 18
6.2 Error Codes - 19
6.3 Compliance - 20
7. Ordering Information ------------------------------- 21
The appearance or specications of the device is subject to partial change for improvement.
www.gyrozen.com
4 / 22
0. Intended use
This manual is for the users who operate the device for the rst time.
The manual provides information on the detailed instructions, precaution, troubleshooting
and maintenance care.
Please read this entire manual to fully understand the safe and eective use of this device.
Keep this manual nearby for future reference.
HyperCOOL is eective for fast freeze drying of any samples.
Freeze-drying is used for sample preparations and for storage of biological and pharmaceuticals
material.
The freeze dried sample is unchanged, which is easy to long term time storage.
So freeze-drying system can be used to the elds of medicine, chemistry and biological science, etc.
Using this manual
1. Safety Precautions
The labels on the device represent safety instructions and directions.
Ambient temperature range : 5℃ ~ 32℃
Maximum altitude: 2,000 meters above mean sea level
Humidity: 30% ~ 80%
Pollution degree: 2
Main supply voltage uctuations not to exceed ±10% of the nominal voltage.
Attention and warning
Attention and warning for
electric shock
1.1 Safety Labels on the Device
1.2 Environmental Conditions
www.gyrozen.com
6 / 22
1. Safety Precautions
Before using the device, please read this operation manual to ensure correct usage. Incorrect
handling of the device may possibly result in personal injury or physical damage on the
device or its accessories.
1. ALWAYS locate the device on a at, rigid and stable place capable of withstanding the
weight of the device and its operation.
2. ALWAYS make a safety zone of 30 cm around the device to indicate that neither
hazardous materials nor persons should be permitted within the area during operation.
▶ ALWAYS position the device with enough space on each side of device to ensure
proper air circulation.
3. Connect the device to voltage sources, which correspond to the electrical requirements on
the label attached to the device.
4. Only use accessories manufactured by GYROZEN.
GYROZEN does not guarantee any problems occurred by using incompatible accessories.
5. Remove any contaminants inside the chamber before operating the device.
6. Should not use ammable, toxic, radioactive, explosive or corrosive materials.
7. The containers should be kept level while drying the samples in them.
8. Any kind of device repair must be performed only by GYROZEN authorized service
engineers.
9. A proper disinfection procedure should be carried out before delivering the device to
service engineer.
10. Maintain all the accessories dry and clean to keep the best condition and to increase the
lifespan.
11. Avoid exposing the device to direct sunlight, extreme temperatures, or moisture.
12. Keep the accessories and tray clean dry before operation.
13. Use sockets with a protective earth conductor and correct mains cable.
14. Ventilate the room properly when operating the device.
1.3 Safety Precautions
2. Product Description
2.1 Product Description
①Vacuum Release Valve
②Power socket
③Power switch
④Drain valve
⑤Air inlet
⑥Pump oil gradations
⑦ Control panel
①
②
③
④
⑥
⑦
⑤
www.gyrozen.com
8 / 22
2. Product Description
2.2 Delivery Package
- Hyper COOL 8080
- AC Power Cable
- Hose
- Clamp
- Operating Manual
· Check all parts for damage that may have occurred during transportation.
· Check the delivery for completeness.
2. Product Description
2.3 Technical Specications
Ultimate Chamber Temp (at RT) (℃) -80
Chamber Volume (L) 8
Trap (Chamber) Size (Ø x L) 310 x 250
ICE Condensing Capacity (kg) 3
Compressor 1HP x 2
Refrigerant R23 ,R507
Power Requirement (Resting, VA) 1500
Dimension (W x D x H, mm) 710 x 610x 960
Weight (kg) 186
Digital Readout Temperature, Time
Function MODE, DEFROST, VACUUM, TIME
Noise <70db
Power Supply 230v, 50Hz
Power Requirement 5.0kVA
www.gyrozen.com
10/22
3.2 Switching On the Device
3. Installation
3.1 Wheel Lock
1. Connect the AC power cord to the power socket on the backside of the device and put the
plug into a power outlet.
▶ Connect the device to voltage sources, which correspond to the electrical requirements on
the label attached to the device.
2. Switch the device on by pressing the mains switch on the right side of the device.
1. Put the device on a at place.
2. Make sure the device is in parallel with the oor.
3. Turn the lever of the stopper to the right to lock the wheel.
4. Make sure the wheels keep the device from moving.
[Lever of the stopper]
Lock: Turn right
Unlock: Turn left
Indice
