Häfele HSB-0331FW Manuale utente
1
INSTRUCTION
MANUAL
PRODUCTS NAME: Blender HSB-0331FW 2 in 1
Products Applied: 535.43.278
Vietnamese English
2
Blender HSB-0331FW 2 in 1
Please read all instructions carefully before using
3
Key parts name and location
Mixer Grinder
revocpoT.、1 dnatsefinkgnidnelB、.5 pucgnidnirG.、9
dilpucgnidnelB.、2 esabelbatatoR.、6 dnatsefinkgnidnirG、.01
pucgnidnelB.、3 enihcamniaM
、
.7
gnirgnidnelB.、4 hctiwsnoitisoP.、8
4
FEATURES
READ BEFORE USE
WORK TIME
1.The machine is for all your blending and grinding needs.
2.Simple and refined design, beautiful, integrated structure, easy to operate and
easy to clean
3.High rotating speed electrical machinery with overheat protection, high
efficiency, time and energy saving, increase service life for electrical machinery.
4.Safety lock device ensures safe and reliable operation
1.The machine has safety protection device. The electrical machine does not
work when fastener does not closely fasten top cover or knife stand is not
screwed tightly to ensure safe use.
2.Please check if power supply is in line with rated voltage before use to avoid
damage.
3.Clean all dismountable parts (refer to “maintenance and clean”)
4.Please read carefully “Key parts name and location” picture for assembling.
5.Please read carefully the “instruction”before use.
The machine has O position, I position, II position and P button switch(O is stop,
I weak, II strong, P point mobility ). Select point mobility and strong position for
meat blending, mincing, and grinding. Process for 10 seconds and then stop
for 5 seconds, turn on the machine after 1 minute rest when processing for one
minute. Select point mobility or strong position for blending vegetable, fruit and
soybean milk. Select weak position for mixing eggs. Please stop for 15 minutes
when the above jobs are done three times consecutively. Turn on the machine
again after cooling of electrical machinery. In this way we can prolong the service
life of the machine.
5
GRINDING
BLENDING
STIRRING EGG
STIRRING VEGETABLE AND FRUIT
1.Grinding cup is suitable for grinding dry food into
powder. Put 150g into grinding cup every time, cover
grinding blade base and screw it tightly clockwise.
Then put into main machine as shown in the picture.
Screw it tightly with your hand holding grinding cup.
Turn on the switch and then grinding begins.
2.When grinding oily materials like sesame, putting
one spoon of white sugar into the cup will have better
effect.
1. Firstly check if position switch is off (if switch is restored to origin position )
2. Put sealing ring into knife base slot, and then screw the stirring cup tightly with
knife stand. (Lock tightly clockwise and loose anti clockwise) Cover stirring cup
and feeding lid.
3. Hold knife stand and screw it clockwise into main machine. Don’t hold vessel
to dismantle it, otherwise vessel will disconnect with knife stand and food in the
cup will exude.
Put egg into stirring cup and appropriate boiled water. Then add some flour.
Cover the cup lid tightly. Press weak position switch for about one minute.
Peel fruit and vegetable and tip seed firstly, cut into dice. Add 250g-350g of
it and appropriate boiled water. Assemble according to assembling and use
instruction, then turn on the machine.
NOTE: if the machine is running idle, that is, the blade does not
touch food, please turn down the machine and cut off power supply.
Loose the food and then turn on the machine to continue grinding.
6
IMPORTANT
1.Keep out of the reach of children.
2.Put the machine in the stable surface and operate as per the above procedure.
3.Make sure that screen is locked with rotating stand before operation. The
blade does not hard contact with transparent cover. Cover transparent lid, fasten
the fastener then turn on the machine.
4.Do not wash main motor and power plug with water or other liquid. Only wipe
them with damp cloth.
5.Please check fruit grounds or juice in middle holder or grounds cup is too full.
Turn off the power supply and clear it if it is too full.
6.Don’t remove cup lid during operation. Don’t put hand or other vessel
into stirring cup and feeding hole when power is still on. Otherwise accident or
damage will happen.
7.This product must not be idle nor exceed the requirement in processed
amount (normally, less than 60 percent would be best). Otherwise, bearings of
motor and blade will overheat.
8.Blades are very sharp. In order to avoid injury, when washing blades, please
put them under water tap to wash. Do not wash them with hand.
9.Please don’t leave when the machine is working. Don’t let children operate the
machine.
10.It is prohibited to run idle or overload when stirring, meat stirring and grinding.
11.Remove power plug and then pour out the food after every operation.
12.Do not put any parts into high temperature sterilizer to sterilize or boiler to
steam and boil for sterilization.
13.The machine is not recommended for other usage.
14.In order to prolong useful life of the machine, there is overheat protecting unit
on motor. When motor runs too long or with too heavy load, the temperature
reaches warning value, motor will stop automatically. After motor stops, pull out
power supply plug. Wait for motor to cool (about 20 to 30 minutes), then use
again.
7
MAINTENANCE AND CLEANING
1. It is recommended to use the machine often to keep electric machinery dry.
2. Please put the machine in a dry place to avoid electric machinery getting wet
and moldy.
3. Don’t flush the main machine with water. Wipe it with wet cloth. Other parts
can be washed with water like fruit pushing bar, top cover, middle holder,
grounds cup, etc.
4. It is recommended to dismantle blade in stirring cup, meat blending cup.Then
drop edible oil to blade shaft and bearing for lubrication.
5. Add appropriate warm water and detergent when cleaning stirring cup which
is loaded into main machine. Cover the cup lid and press switch. Water it with
fresh water after stirring for 30 seconds.
15.If power supply flexible cord is damaged, to avoid danger, do ask factory, its
service department or other special person to replace.
16.If you have any problem with this machine, do not disassemble by yourself,
contact the service department or after-sale service department of this
Company.
8
HƯỚNG DẪN
SỬ DỤNG
PRODUCT NAME - SERIES NO.:
TÊN SẢN PHÂM: MÁY XAY SINH TỐ HSB-0331FW 2 TRONG 1
Mã sản phẩm áp dụng: 535.43.278
Vietnamese
9
MÁY XAY SINH TỐ
HSB-0331FW 2 trong 1
Vui lòng đọc kỹ tất cả các hướng dẫn trước khi sử dụng
10
Tên các bộ phận và vị trí
Máy xay sinh tố Máy xay khô
1. Núm đậy 5. Đế dao cối xay 9. Cối xay khô
2. Nắp cối xay sinh tố 6. Mâm xoay 10. Đế dao cối xay khô
3. Cối xay sinh tố 7. Thân máy chính
4. Gioăng đệm 8. Núm điều khiển
Indice
Lingue:
Altri manuali Häfele Miscelatore
