H3C VS0E1ECDC Manuale utente
H3C Video Encoder/Decoder Frame
Installation Guide
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08050S-20080403-C-1.03
Copyright © 2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www.h3c.com
Technical Support
customer_service@h3c.com
http://www.h3c.com
About This Manual
Organization
The H3C Video Encoder/Decoder Frame Installation Guide describes the
specifications, appearance, and installation of the H3C video encoder/decoder frame
(hereinafter referred to as the frame). Read this manual carefully to avoid any possible
bodily injury or equipment damage during installation. The manual is organized as
follows:
Chapter Contents
Chapter 1 Overview Describes the specifications and appearance of the
frame.
Chapter 2 Installing the
Frame
Describes the procedures of installing the
single-power supply frame and dual-power supply
frame.
Chapter 3 Compliance and
Safety Guide for the
Frame
Describes the compliance and safety specifications
for the frame.
Conventions
The symbol used in this manual is described in the following table:
Symbol Description
Note Means a notice during the operation
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
Installation Guide
H3C Video Encoder/Decoder Frame Table of Contents
i
Table of Contents
Chapter 1 Overview.......................................................................................................................1-1
1.1 Specifications.....................................................................................................................1-1
1.2 Appearance........................................................................................................................1-1
Chapter 2 Installing the Frame.....................................................................................................2-1
Chapter 3 Compliance and Safety Guide for the Frame............................................................3-1
3.1 Regulatory Compliance Information ..................................................................................3-1
3.1.1 Regulatory compliance standards...........................................................................3-1
3.1.2 European Directives compliance.............................................................................3-2
3.1.3 USA regulatory compliance.....................................................................................3-2
3.1.4 Canada regulatory compliance ...............................................................................3-3
3.1.5 Japan regulatory compliance..................................................................................3-3
3.1.6 产品符合中国CCC认证要求 ....................................................................................3-3
3.2 Safety Information Sicherheits informationen安全信息 .....................................................3-4
3.2.1 Overview Überblick 概述 .........................................................................................3-4
3.2.2 Electricity Safety Elektrische Sicherheit 用电安全 ..................................................3-7
3.2.3 Fuse Sicherung保险丝 ..........................................................................................3-11
Installation Guide
H3C Video Encoder/Decoder Frame List of Figures
ii
List of Figures
Figure 1-1 Front view (dual-power supply frame)..................................................................1-2
Figure 1-2 Rear view (dual-power supply frame)...................................................................1-2
Figure 2-1 Install dual-power supply frame............................................................................2-1
Figure 2-2 Install single-power supply frame.........................................................................2-2
Installation Guide
H3C Video Encoder/Decoder Frame List of Tables
iii
List of Tables
Table 1-1 Specifications of the frame.....................................................................................1-1
Table 3-1 Regulatory compliance standards..........................................................................3-1
Table 3-2 Safety symbol and description ...............................................................................3-6
Installation Guide
H3C Video Encoder/Decoder Frame Chapter 1 Overview
1-1
Chapter 1 Overview
H3C video encoder/decoder frame (hereinafter referred to as the frame) is a hardware
component of the video surveillance system developed by Hangzhou H3C
Technologies Co., Ltd. (hereinafter referred to as H3C). It is used to install video
encoders and decoders in a centralized way, and to provide power supply module and
ground terminals for the encoders and decoders.
The frame falls into two types: single-power supply frame and dual-power supply
frame.
1.1 Specifications
Table 1-1 Specifications of the frame
Item Single-power supply
frame Dual-power supply
frame
Model VS0E1ECDC VSM3ECDC
Number of
encoder/decoders that the
frame can hold 9 8
1 2
Number of power supply
modules 90V to 264V AC,12V/12.5A
Physical dimensions (H x
W x D) 219.5 × 440 × 254 mm (8.64 × 17.32 × 10 in.)
Operating temperature 0°C to 45°C (32°F to 113°F)
Operating humidity
(noncondensing) 5% to 95%
1.2 Appearance
The single-power supply frame is similar with the dual-power supply frame in their
appearance. The following takes the dual-power supply frame for description.
Installation Guide
H3C Video Encoder/Decoder Frame Chapter 1 Overview
1-2
(1)
(3)
(2)
(4)
(1)
(3)
(2)
(4)
(1) Mounting bracket (2) Power supply module
(3) AC power interface (4) Slide rail for installing EC/DC
Figure 1-1 Front view (dual-power supply frame)
(1)
(3)
(2)
(4)
(1)
(3)
(2)
(4)
(1) Cable guide for power cable (2) Power cable X9
(3) Power supply status detection wire (4) Ground terminal
Figure 1-2 Rear view (dual-power supply frame)
Note:
The power supply status detection wire (as shown inFigure 1-2(3)) is connected with
the alarm input interface of the encoders/decoders, and used to detect the status of the
power supply module of the frame.
Installation Guide
H3C Video Encoder/Decoder Frame Chapter 2 Installing the Frame
2-1
Chapter 2 Installing the Frame
After unpacking the frame, ensure the components are complete and intact according
to H3C Video Encoder/Decoder Frame Packing List. If any problem is found, please
contact the local agent of H3C.
Before using the frame, follow the installation procedures in Figure 2-1or Figure 2-2 to
install the frame according to the frame type.
Figure 2-1 Install dual-power supply frame
Installation Guide
H3C Video Encoder/Decoder Frame Chapter 2 Installing the Frame
2-2
Figure 2-2 Install single-power supply frame
Altri manuali per VS0E1ECDC
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali H3C Convertitore multimediale
