LED window will show “ ”, the fan speed cannot be adjusted.
3. When used as dehumidifier only, do not use the air exhaust dust.
TIME SET FUNCTION
1.To set time to start the machine with the unit off (but power supplied), press “TIMER”
button, the LED window will show “ ”, press the “TIME “ button, set the time to start as you
like. The setting range is 1-24 hours.
2.If have set switch on/off after 24 hours, press this key again so not to cancel the timing.
FAN SPEED FUNCTION
Press the “SPEED” button. You can choose high, middle or low-speed of air delivery.
Water level auto alarm function in water tank
Cooling only unit: In the random mode, the water level switch will close, and water full
indicator will light up if the water level is higher than the below picture water level. Otherwise,
the water full indicator will turn off and the unit will restore to work if the water level is lower
than the below picture water level.
MAINTENANCE/SERVICE
MAINTENANCE METHODS
Pull the plug out of the socket before cleaning.
Make sure there is no power to the unit before beginning to maintain or repair to prevent
accident caused by electric shock.
Do not use chemical solvent (like benzene, alcohol glazer) to clean the surface of the unit. If
you do so, the surface will be scratched, damaged, even the whole casing could become
deformed.
AIR FILTER
If the air filter is blocked with a lot of dust, the air flow volume will reduce. Clean the filter once
every two weeks.
Open the air filter
1. Open the air filter cover downwards, then take off the air filter.
2. Take the air filter and active carbon filter out of filter cover.
