Hafler IRIS COMPACT DISC PLAYER Manuale utente
OWNER’S
MANUAL
IRIS COMPACT DISC
PLAYER
A Division of Rockford Corporation
613 South Rockford Drive
Tempe, Arizona 85281
602
-
967
-
3565
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Installation
Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2
Operation
Explanation Of Keys
......................
Page 2
Remote Control
........................
Page 4
Display Indications
.......................
Page 5
Loading/Unloading Disc
....................
Page 7
PlayingaDisc ........................ Page7
Next/Previous Track Selections
................
Page 8
Searching Function
.......................
Page 9
Random Play
..........................
Page 9
Programming
..........................
Page 11
Additional Information
.....................
Page 13
Technical Data
..........................
Page 16
Symptoms and Their Likely Causes . . . . . . . . . . . . . . Page 17
Factory Service and Limited Warranty . . . . . . . . . . . . . Page 17
INTRODUCTION
The Hafler
IRIS
system is a major step forward in the world
of audio technology. The IRIS CD completes an intensive
engineering effort to create a series of components which
offer superior performance combined with the unprece-
dented convenience of the IRIS remote control.
The basic operation and features of the IRIS CD Player are
described in simplified form in figures 1 and 2. Although
operation of the CD Player is possible by studying these
diagrams only, complete appreciation of its features and
operating modes can only be realized by thoroughly read-
ing this owner’s manual.
We have tried to present this information in an easy to
follow format. We urge you to take the time to read through
this manual as soon as possible.
INSTALLATION
SET-UP OF THE IRIS CD PLAYER
FREE STANDING
Always set the player horizontally on a flat, firm surface.
Allow a minimum space of a least
14"
above the player so
as not to interfere with the cooling of the player.
STACKED
Locate the player preferably at the bottom. Never set the
player directly on top of a high-power amplifier, because
such an amplifier gives off a substantial amount of heat.
RACK MOUNTING
The IRIS CD Player is shipped with removable end caps
on its front panel. Optional rack mounting ears are avail-
able from the factory for mounting the unit in a standard
19” equipment rack.
1
WARNING- Never allow the player to stand for long
periods in direct sunlight or near any heat source.
CONNECTIONS
REMOTE CONTROL
The IRIS CD has two recessed male connectors on the
back panel. They are internally connected together to
allow the IRIS digital data-bus to “daisy-chain” to other
IRIS-compatible accessories.
Connect either end of the supplied ribbon-type umbilical
cable to either of the CD’s connectors. Note that both of
the cable’s connectors are keyed, and therefore fit only one
way. Be sure to insert the plugs fully. Connect the free
end of the cable to the connector on the rear of (either) the
IRIS Preamp or IRIS Tuner.
AUDIO
Output Right/Left: For the signal output to the preamplifier.
Connect a standard RCA-type patch cord from the right
and left outputs into the corresponding CD input jacks of
your IRIS preamplifier.
Digital: For digital output signal to an outboard Digital to
Analog (A/D) converter.
POWER
For AC line (mains) power. Make sure the line voltage on
the rear of the unit is appropriate for your location.
OPERATION
EXPLANATION OF KEYS (Refer to Figure 1)
1. POWER button
For switching on and off.
2. DISPLAY
Indicates the player’s present function.
Displays details from the disc contents list.
The indications on the display are detailed in Figure
2.
3. PLAY button
For starting play (PLAY).
For returning to the beginning of a track (REPLAY).
4. STOP button
For stopping play.
For erasing a program.
5. OPEN/CLOSE button
For opening and closing the disc tray.
6. SHF (SHUFFLE) button
For playing all tracks on a disc in random order.
7. PRG (PROGRAM) button
For storing track numbers in a program.
For erasing track numbers from a program.
For checking the program.
8. REPEAT button
For repeating a disc or a program.
9. W,
>>
(SEARCH) button
For fast search to a particular passage during play.
(G
for reverse, >> for forward.)
1O.PAUSEbutton (HOLD on remote)
For briefly interrupting play and for returning from in-
terrupted play.
11.(
(PREVIOUS),
)1
(NEXT) buttons
For selecting a previous or later track during play.
For selecting the track number you want play to
begin with.
For selecting track numbers when compiling a pro-
gram.
I
IRIS REMOTE CONTROL
TRANSMITTER
You should re-read the remote section of the IRIS
PREAMPLIFIER manual in conjunction with the following
additional information.
HANDSHAKE SYSTEM
The umbilical connection established allows a very con-
venient “HANDSHAKE” operation between IRIS SYSTEM
COMPONENTS. In simple terms, your IRIS CD Player
tells your IRIS Preamplifier that it is connected and
powered. This tells the Preamplifier, when CD is selected,
to automatically “transfer” the remote’s top eight (multi-
legend) keys to perform CD command functions.
All of the KEY functions of the CD Player panel which are
convenient from remote operation are available from the 8
remote KEYS:
PREAMP
PHONO
CD
TUNER
VIDEO
AUX
1
AUX
2
TAPE
1
TAPE
2
TUNER
MEM 1
MEM 2
MEM 3
MEM
4
MEM 5
DOWN
SCAN STOP
SCAN UP
CD
PLAY
STOP
<<
(REVERSE SEARCH)
>> (FORWARD SEARCH)
RPT
(REPEAT)
I4
(PREVIOUS)
HOLD (PAUSE)
bl
(NEXT TRACK)
CLEAR KEY
The CLR
(CLeaR)
key on the remote transmitter causes
the CD Player to stop and allows selection of another input
source to the IRIS Preamp within 3 seconds. If another
source is not selected within three seconds, the remote’s
key functions will remain in CD mode. If you wish to select
another source but keep the CD Player operational:
j
Press the HOLD key (prior to the CLR key).
-
This causes the CD Player to pause
-
Press the CLR key
-
Select another SOURCE
To return to the CD Player:
-
Press CLR key
-
Select CD
-
Press HOLD key
-
The CD Player will now continue playing
RECORD SECURITY
As explained in the “remote” section of the IRIS
Preamplifier Manual, if RECORD SECURITY is in effect
(either RECORD switch is IN on the IRIS Preamplifier), the
CD or Tuner will refuse all IRIS remote commands, includ-
ing CLR. (Volume and Balance are always active.) The
Preamplifier’s red MUTE legend will remind you of this by
its distinctive interrupted-flashing mode.
THE INDICATIONS OF THE DISPLAY
(Refer to Figure 2)
Each Compact Disc has, along with the music, a list of
contents detailing the numbers of the tracks, the playing
time of each track and the total playing time of the disc.
The player always scans this first and stores it in memory
to provide information via the display.
5
1
’
. 9
---’
Lights up when the player is switched on.
-
Flashes during scanning of the disc contents list.
2. TRACK
-
The number of the track which is currently playing.
-
The number of tracks on the disc when the tray is
closed with the OPEN/CLOSE button.
3. ARROW SYMBOL
-
Lights up when the tray is closed by hand, with
PLAY, or with SHF.
4.
TIME
-
The elapsed playing time in minutes and seconds
of the track which is playing.
-
The total playing time of the disc when the tray is
closed with OPEN/CLOSE.
5. PROGRAM
-
Lights up when the first track number of a program
is entered.
6. SHUFFLE
-
Lights up when the disc is played in random order.
7. REVIEW
-
Lights up when checking the program.
8. PAUSE
-
Lights up when the player is in the pause mode.
9. REPEAT
-
Lights up when repeating a disc or program.
10. ‘0)))’ SYMBOL
-
Lights up briefly when receiving a command
through the IRIS Handshake system.
11. ERROR
-
Lights up briefly when an operating error is made.
6
LOADING THE DISC
Open the disc tray by pressing OPEN/CLOSE.
-
Insert the disc into the tray printed side up.
-
Handle disc by edges only
-
do not touch the
surface.
To close the tray:
-
Press the front of the tray lightly or OPEN/CLOSE,
or press PLAY, to simply play the disc.
-
Press SHF to play the disc in random order.
If ERROR lights up after the tray is closed, this means that
the disc is upside-down, dirty, badly scratched or otherwise
faulty.
UNLOADING THE DISC
Open the tray by pressing OPEN/CLOSE.
-
Hold the disc in same way as when
-
Store the disc immediately in its
prevents soiling and damage.
loading.
holder. This
Close an empty tray by pressing OPEN/CLOSE.
-
Avoid leaving the tray open, to prevent dust from
entering.
PLAYING THE ENTIRE DISC
Close the tray by hand or by pressing PLAY
-
The ARROW SYMBOL indication lights up.
-
Track ‘1’ appears on the display.
-
Play starts as soon as the elapsed time indicates
‘
0
:OO’.
Some compact discs have a 3 or
4
second
count-down feature that precedes the actual pro-
gram material.
-
After the last track the disc stops.
-
The ARROW SYMBOL indication goes out.
-
The display again shows the number of tracks and
the total playing time of the disc.
7
GOING BACK TO THE BEGINNING
OF A TRACK (REPLAY)
Press PLAY
-
The current track starts again from the beginning.
SELECTING ANOTHER TRACK
DURING PLAY
SELECTING A HIGHER TRACK NUMBER
Press
)1
(NEXT) until the desired track number appears
on the display.
-
The playing time indication disappears.
-
Play is interrupted until selecting is finished.
-
As soon as the playing time indication returns, the
selected track begins to play.
ifw
(NEXT) is pressed while playing the last track, ERROR
lights up to indicate that there is no next track and playing
of the last track continues. If the player is in the REPEAT
mode, then play continues with the first track.
SELECTING A LOWER TRACK NUMBER
Press
)(
(PREVIOUS) until the desired track number ap-
pears on the display.
-
The playing time indication disappears.
-
Play is interrupted until selecting is finished.
-
As soon as the playing time indication returns, the
selected track begins to play.
If
)(
(PREVIOUS) is pressed while playing the first track,
ERROR lights up to indicate that there is no previous track
and playing of the first track continues. If the player is in
the repeat mode, then play continues with the last track.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hafler Lettore CD
