HAI 68A02-1 Manuale utente
Day/Night Color Bullet Camera
w/ 36 IR LEDs
OPERATING MANUAL
Model 68A02-1
2
Table of Contents
Features 3
Dimensions 3
Parts Name & Descriptions 4
Connections 5
Vari-focal, DC Auto Iris Lens Adjustments 6
OSD Menu Instructions 7
Menu & Setting Details 7
OSD Menu Control 9
OSD Menu ENTER / EXIT 9
Main Menu 10
Specifications 14
Document Number 68I02-1 Rev. A
January 2008
3
Features
• 1/3” CCD Sensor
• High Resolution – 550 TV Lines(Color), 600TV Lines(B/W)
• 3.8~9.5mm Vari-focal Lens, DC Auto Iris
• Day/Night Function with ICR
• 36 IR LEDs
• Auto Switching CDS Sensor
• IR Visual Distance: Up to 100 ft
• 0.1 Lux(Color), 0.00 Lux(B/W, IR LED On)
• Weatherproof (IP65)
• Sun-shield w/ Feed-Through Bracket
• Power: 12VDC/24VAC Dual Voltage
• Compact Size
Dimensions (UNIT: mm)
4
Parts Name & Descriptions
5
Connections
Service Monitor Cable
(suppplied)
• Power connection - Requires 12VDC or 24VAC. (Auto-Polarity Detection and Protection)
• All camera model are supplied with second video output on the camera module. To use
this feature along with a service monitor, second monitor cable/connector is required.
•Power connection - Requires 12VDC or 24VAC (Auto-Polarity Detection and
Protection).
•This camera is supplied with a second video output on the camera module.
T
o use this feature along with a service monitor, a second monitor and cable is
required.
6
Vari-focal, DC Auto Iris Lens Adjustments
1Untighten Main Body Ring cover from the Base Ring.
4
2
2
Loosen Zoom & Focus screws and make necessary adjustments as shown.
Field of View: Telephoto( T ) to Wide( W )
Focus: Near( N ) to Infinity( )
2
T------- W
------- N
Adjust Focus
Adjust Angle for Field of View
3
Tighten Main Body Ring back to the Base Ring.
Please refer to Page 10 of this manual for further instructions.
4
7
OSD Menu Instructions
Menu & Setting Details
LENS
SHUTTER
WHITE BALANCE
BACKLIGHT
AGC
DNR
DSS
• DC
• NONE
• FLK
• ESC
• ATW
• MANUAL
• AWC
• OFF
• LOW
• MIDDLE
• HIGH
• OFF
• NORMAL
• HIGH
• OFF
• LOW
• MIDDLE
• HIGH
• OFF
• AUTO
BRIGHTNESS
BRIGHTNESS
MODE
RED
BLUE
N/A
BRIGHTNESS
BRIGHTNESS
LIMIT
1-70 (25)
1-70 (25)
NORMAL
SPECIAL
0-256(32)
1-256(39)
1-70 (25)
1-70(25)
x2 - x128 (x8)
Main Menu
8
OSD Menu Instructions
Menu & Setting Details
SPECIAL • CAMERA ID
• COLOR
• DZOOM
• SYNC
• MOTION DET
• PRIVACY
• MIRROR
• SHARPNESS
• RESET
• RETURN
OFF
ON
ON
AUTO
BW
OFF
ON
INT
OFF
ON
OFF
ON
OFF
ON
ON
OFF
x1- x8 (x1)
AREA SEL AREA 1, 2, 3, or 4
AREA STATE ON/OFF
TOP
DOWN
LEFT
RIGHT
AREA SEL AREA 1, 2, 3, or 4
AREA STATE ON/OFF
TOP
DOWN
LEFT
RIGHT
LEVEL 0~31 (8)
Main Menu
9
OSD Menu Instructions
OSD Menu Control
MENU KEY - Used to access menu mode, Also used to confirm the setting
UP / DOWN KEY - Used to choose the desired menu selection.
LEFT / RIGHT KEY - Used to choose the desired menu feature adjustment.
OSD Menu ENTER / EXIT
A. OSD MENU ENTER
• Push Menu Key
B. OSD MENU EXIT
• Press EXIT Menu from Main Menu
10
OSD Menu Instructions
Main Menu
A. LENS
This function is used to adjust the brightness of the screen.
• DC: The brightness can be adjusted in DC mode. The brightness can be
adjusted within the range of 1 to 70.
B. SHUTTER
This function is used to control the condition and speed.
• NONE: Shutter is off.
• FLK: Select ‘FLK’ mode when flickering occurs on the screen due to imbalance
between illumination and frequency.
• ESC: Select ‘ESC’ mode for automatic control of shutter speed. The speed is
controlled automatically according to the brightness of the screen.
C. WHITE BALANCE
This function is used to balance the screen color.
• ATW (Auto Tracking White Balance):
Select ‘ATW’ when using within the color temperature range of 1,800°K to 10,500°K (Ex.
Fluorescent light, outdoor, sodium vapor lamp or inside tunnels)
• AWC (Auto White Balance Control):
Select SETUP button while the camera is directed at a piece of white paper to obtain the
optimum state under current illumination. If the environment including the light source is
changed, you have to adjust the white balance again.
• MANUAL (Auto White Balance Control):
Select ATW or AWC first before selecting Manual mode. Once Manual mode is selected,
select SETUP. Set the appropriate color temperature, and increase or decrease the red
and blue color values while monitoring the color changes on the object. The Manual mode
enables finer adjustment.
Indice
Altri manuali HAI Telecamera di sicurezza
