Halo Power Wallet Manuale utente
TM
BY HALO
WITH RFID PROTECTION
Operating Instructions
h
r
h
h
h
h
TM
1
What’s Included With Your HALO
Detachable
Standard USB-
Micro USB cable
Detachable
Standard USB-
Lightning cable
Detachable
Standard USB-
30 pin cable
Getting To Know Your HALO Phone Charger
h
r
h
h
h
Power button/LED battery indicator/Standard USBOUT port (2A)
Standard
USB
OUT port (1A)
Built-in Standard USB IN cable
Wall Adapter
(not included)
Computer
h
h
h
h
h
h
Power On/Off Button
2
To Turn On/Off the HALO Charger
To turn on, press the power button/USB OUT port on
the top of the HALO charger and the LED lights around
the port will illuminate. Press and hold the power
button/USB OUT port for three seconds to turn off.
Charging the HALO Charger
Using the built-in Standard USB IN cable, plug the
USB tip into the Standard USB port on your computer
or an AC adapter (not included) that accepts Standard
USB. Your HALO charger will automatically begin
charging.
Check Your HALO Charger’s Battery Level
Indicator Light How To Read Amount of Charge
Red light 0%-33%
Yellow light 34%-66%
Green light 67%-100%
Reading Your LED Battery Indicator
While Charging Your HALO Charger
Indicator Lights How To Read Amount of Charge
Red light blinking 0%-33%
Yellow light blinking 34%-66%
Green light blinking 67%-99%
Solid green light 100% fully charged
3
Choosing the Appropriate Cable to Charge Your
Personal Electronic Device
Model Corresponding Cable/Tip
iPhone 4, 4s, iPod classic,
iPad 1, 2, 3, iPod nano
& earlier models
Standard USB-30 pin Cable
iPhone 5, 5c, 5s, iPad 4,
iPad Mini, iPad w/retina,
iPod nano w/multi-touch
and retina displays
Standard USB-Lightning Cable
Android, Samsung
and Windows Phones
& Tablets
Standard USB-Micro USB Cable
Charging Your Personal Electronic Device
iPhone 4, 4s, iPod Classic, iPod Nano and
Earlier iPhone/iPod Models
1. Using the provided Standard USB-30 pin cable, plug
the Standard USB end into one of the USB OUT ports
on the HALO charger.
2. Plug your personal electronic device into the 30-pin
tip end of the cable and your device will automatically
begin charging.
h
r
h
h
r
h
h
h
iPhone 5, 5c, 5s iPod Nano w/Multi-Touch
and Retina Displays
1. Using the provided Standard USB-Lightning cable,
plug the Standard USB end into one of the USB OUT
ports on the HALO charger.
2. Plug your personal electronic device into the
Lightning end of the cable. Your device will
automatically begin charging.
Android, Samsung and Windows Phones/Tablets
1. Using the provided Standard USB-Micro USB
cable, plug the Standard USB end into one of the
USB OUT ports on the HALO charger.
2. Plug your personal electronic device into the Micro
USB end of the cable. Your device will automatically
begin charging.
For Other Personal Electronic Devices
Certain electronic devices (such as Nook Color, Nook
HD, Samsung Galaxy Tab 2 & 3) have special
connectors. If your personal electronic device does
not accept one of the provided connectors, please
use the cable provided with your device for charging.
Plug the Standard USB end of the cable that came
with your device into one of the Standard USB OUT
ports on the HALO charger. Plug your personal
electronic device into the other end of the cable and
your device will automatically begin charging.
To contact us, email us at
or call 888-907-6274
HALO2CLOUD, LLC
148 Eastern Boulevard
Glastonbury, CT 06033 USA
www.halo2cloud.com
The HALO cloud logo is
a registered trademark of
HALO2CLOUD, LLC
Charging Two Electronic Devices
You can charge two devices simultaneously by using
both Standard USB OUT ports on your HALO charger
at the same time. You can use two of the three
provided cables at the same time, or you can use one
of the provided cables plus your own cable that came
with your personal electronic device.
Charging Tablets
Your HALO charger is equipped with two Standard
USB out ports: a 1A port and a 2A port. Both can be
used for charging your personal electronic devices
and can be used simultaneously. When charging
tablets and other large electronic devices, it is
recommended to use the 2A (port/power button/LED
battery indicator). The 1A port can also be used and
will not harm your tablet or personal electronic
device; however, the 2A port will charge your larger
devices faster than the 1A port.
Intelligent Recognition
The HALO charger is programmed with an intelligent
recognition system to achieve higher compatibility for
charging different mobile phones. If it does not charge
when connected to your mobile phone, please restart
the power charger.
Compatible with:
Mobile phones, Tablets, PSP, NDS, MP3, MP4, MP5,
Bluetooth GPS, Cameras and more
About RFID
RFID stands for ‘Radio Frequency Identification.’ Newer
credit cards and Passports may contain an RFID chip,
which allows wireless, automatic transfer of data.
Check with your credit card company or
Passport issuer to see if yours contain an RFID chip.
Your HALO Power Wallet is lined with RFID blocking
material that blocks transfer of data between your
personal credit cards and wireless RFID readers. The
RFID material is located throughout the main lining of
the wallet, however, in order to be fully protected and
blocked, your wallet must be closed, so all contents are
effectively shielded. Exposing your wallet to high heat
(e.g. with an iron, oven, dryer, etc.), high humidity or
getting it wet will damage the RFID material and may
cause it not to work.
Storing/Handling/Cleaning
- Do not get wet or store in extreme temperature
conditions.
- Do not disassemble or attempt to repair yourself.
- Use a soft cloth with soap to clean the exterior of your
HALO charger. Do not use liquid detergent or chemicals
of any kind.
Safety Precautions
- This HALO charger has been designed and
manufactured to ensure personal safety. Please read
the following carefully before using. Incorrect operation
or incompatibility with your personal electronic device
may result in reduced battery performance or damage.
- Carefully read the operating instructions, and use the
HALO charger correctly
- Caution: The lithium-ion rechargeable battery used in
this charging device may present a risk of fire or chemical
burn if mistreated. Do not disassemble, expose to heat
above 212°F (100°C) or incinerate.
- Misusing or incorrectly connecting the HALO charger
may cause electric shock to users and damage
equipment. The HALO charger may become warm under
extended high power operation. During operation, keep
the HALO charger away from materials that may be
affected by these temperatures.
- When used correctly, lithium-ion rechargeable batteries
provide a safe and dependable source of portable power.
However, if they are misused or abused, this may result in
leakage, burns, fire or explosion, causing personal injury
or damage to other devices.
- Do not disassemble the HALO charger. There are no
user-serviceable parts inside. Incorrect reassembly
may result in shock or fire hazard.
- Do not drop or subject to strong impacts. Do not
operate the HALO charger if it has received a sharp blow,
or otherwise been damaged in any way.
- Do not expose the HALO charger to moisture, water,
rain, or snow.
- Do not insert any object into the ports or openings of the
HALO charger.
- Never charge the HALO charger unattended.
- There is a risk of the batteries exploding,
overheating, or igniting. Do not disassemble, modify, heat
or short-circuit the batteries. Do not place in fire or leave
Indice
