Hama Cube Series Manuale utente

Mobile Speaker

RadioControlledAlarm Clock“Cube”

Funkwecker

RUS

ALARM

SNOOZE/LIGHT

MODE +/RCC

-/°C/°F

14:06

DIE

21.5

DATE

DAY TEMP

MONTH

Gebruiksaanwijzing

Οδηγίες χρήσης

Instrukcja obsługi

Használati útmutató

Návod kpoužití

Návod na použitie

Manual de instruções

Manual de utilizare

Bruksanvisning

Käyttöohje

Работна инструкция

GB Operating Instructions

Bedienungsanleitung

Mode d‘emploi

Instrucciones de uso

Руководство по эксплуатации

Istruzioni per l‘uso

FIN

00186304

00186305

00176910

00176911

00176912

Technical data/Technische Daten

Power supply /Stromversorgung/Alimentation

électrique /Alimentación de corriente/ Питание

/Alimentazione elettrica /Stroomvoorziening /

Ηλεκτρική τροφοδοσία /Zasilanie elektryczne /

Tápellátás /Napájení /Napájanie /Alimentação

elétrica /Alimentarecucurent /Strömförsörjning

/Virransyöttö / Електрозахранване

2xAAA batteries

Battery /Batterie/ pile /pila /

батарея /batteria /batterijen

/μπαταρίες/bateria /elem /

baterie/batéria /pilha /baterie/

batteri /paristo / батерия

Frequenz/Frequenz /fréquences/frecuencia

/частот /frequenza /Frequentie / συχνοτήτων/

Częstotliwość/frekvencia /Frekvence /Frekvencia

/frequências /frecvențe/frekvensband /

Radiotaajuudet / Радиочестотни

77.5 kHz

Temperaturemeasuring range/ Messbereich

Temperatur/ Plage de mesuredelatempérature/

Rango de medición de temperatura/

Диапазон измерения температуры/Campo

di misurazione temperatura/ Meetbereik

temperatuur/ Εύρος μέτρησης θερμοκρασίας/

Zakres pomiaru temperatur/ Hőmérséklet mérési

tartomány/ Rozsah měření teploty/ Rozsah

merania teploty/ Amplitude de medição da

temperatura/ Domeniu măsuraretemperatură/

Mätområde temperatur/ Lämpötilan mittausalue/

Диапазон на измерване на температурата

0°C –+50°C

32°F –122°F

14-

MON

21.4 C

DST

DATE

DAYTEMP

MONTH

12:26

ALARM MODE

SNOOZE /LIGHT

+/RCC -/°C/°F

910

1. Controls and display

1. Time

2. Date

3. Day

4. Temperature

5. DCF radio signal

6. DST–summer time

7. Alarm symbol

8. ALARM button

=sets the alarm/activates and

deactivates the alarm clock

9. MODE button

=settings/conrms the setting

10. +/RCC button

=activates and deactivates manual

radio signal reception/switches

between 12 and 24-hour format/

increases the current setting

11. -/°C/°F button

=decreases the current setting/

switches between °C and °F

12. SNOOZE/LIGHT button

=activates the backlight/interrupts the

alarm for approximately 10 minutes

13. Battery compartment

GOperating instruction

2. Package Contents

•Cube radio-controlled alarm clock,

•2xAAA batteries

•These operating instructions

3. Safety Notes

•Do not use the product in areas wherethe use of electronic devices is not permitted.

•Only connect the product to asocket that has been approved for the device. The

socket must be installed close to the product and easily accessible.

•Do not attempt to service or repair the product yourself.Leave any and all service

work to qualied experts.

•Do not modify the product in any way.Doing so voids the warranty.

Warning –Batteries

•Only use batteries (or rechargeable batteries) that match the specied type.

•Do not mix old and new batteries or batteries of adifferent type or make.

•When inserting batteries, note the correct polarity (+ and -markings) and insert the

batteries accordingly.Failure to do so could result in the batteries leaking or exploding.

•Only use batteries (or rechargeable batteries) that match the specied type.

•Do not overcharge batteries.

•Do not short circuit the batteries/rechargeable batteries and keep them away from

uncoated metal objects.

4. Getting started

4.1 Inserting the batteries

Open the battery compartment (13), remove the contact breaker and then close the

battery compartment (13).

4.2. Replacing the batteries

•Open the battery compartment (13), remove and properly dispose of the dead

batteries and insert two new AAA batteries with the correct polarity.Replace the

battery compartment (13) cover.

5. Operation

5.1 Automatic date/time setting using the DCF signal

•Once you have inserted the battery,the display is switched on, an acoustic signal

sounds and the alarm clock automatically starts searching for aDCF signal. During

the search, the radio symbol ashes.

•

Once radio signalreceiving is successful, the displayshows the symbol “radio tower“

continuously.no ashing. This process cantake7to5minutes.

•When the wireless signal is received, the date and time areautomatically set.

Display Searching for the DCF signal

Display ashing Active

Display steady Successful -signal reception

Not displayed Inactive –nosignal reception

Note –Cancellation of search process

•The search for the DCF signal can be cancelled by pressing the +/RCC button (10).

•Then set the time and date as described in 5.2 Manually setting the date/

time.

•Asearch for aDCF signal is nonetheless carried out daily (between 1amand 5

am) in order to update the time and date. If the signal is received successfully,the

time and date areautomatically overwritten.

Note –Time settings

•If,during initial setup of the device, no DCF radio signal is received within the rst

few minutes, the search is aborted. The radio icon (6) will go out.

•If thereare reception problems, we recommend leaving the clock to sit overnight,

since interference is generally less at night.

•In the meantime, you can start amanual search for the DCF radio signal at

another location or you can manually set the time and date.

•The clock automatically continues to search for the DCF signal on adaily

basis (at 1amand 5am). If the signal is received successfully,the manually

set time and date areoverwritten.

Press and hold the +/RCC button (10) for approx. 3seconds to start amanual search

for the DCF radio signal.

Note –Manual search

•The manual search is automatically aborted after 7minutes.

•Using the RCC button (10) frequently will drain the battery.Werecommend only

using this function to seek out an optimal location for the device.

Note –Summer time

•The clock automatically switches to summer time. DST (6) appears on the display

as long as summer time is activated.

5.2 Manually setting the date/time

•Press and hold the MODE button(9) for approximately3seconds until thehours display

beginstoash.

•Set thefollowinginformation in the order listed:

Time zone (+12/-12), Hours, Minutes, Year,Month,Day,Language

•Toselectthe individualvalues, press the +/RCC button (10)orthe -/°C/°F button(11),

andconrm each selectionbypressingthe MODE button(9).

•Press the MODE button (9) immediately to adopt the setvalue displayed and skip ahead.

•Ifyou do notmake an entry for 20 seconds,you automatically exit thesetting mode.

Note –Day of the week

•For the weekday display (3), you can choose from the following languages:

German (GER), English (ENG), Italian (ITA), Spanish (ESP), Dutch (NET), Danish

(DAN)and French (FRE).

Note –Time zone

•The DCFsignal canbereceivedover long distances,but alwaystransmitsthe current

CentralEuropeanTime in Germany.Make sure youaccount forthe time difference in

countries in othertimezones.

•Ifyou areinMoscow,the timeis3hours later than in Germany.Thismeans that

you should set+3for the timezone. The clockthensetsthe timeautomatically to 3

hoursahead after receiving theDCF signaloraccordingtothe manuallyset time.

Selecting 12 or 24-hour format

•Press the +/RCC button (10) to switch between the 12 and 24-hour formats.

Backlight

•Press the SNOOZE/LIGHT button (12) to light up the display for approximately 5

seconds.

5.3 Alarm clock

Setting the alarm time

•Press the ALARM button (8) to go to alarm mode.

•Press and hold the ALARM button (8) to set the alarm time for the alarm displayed.

The hours display begins to ash.

•Press the +/RCC button (10) or the -/°C/°F button (11) to select the hour for the

alarm time, and conrm your selection by pressing the ALARM button (8). The

minutes display begins to ash.

•Repeat the process to set the minutes for the alarm time.

•Press the ALARM button (8) repeatedly to go back to the time display.

•Ifyou do not make an entry for 20 seconds, the device automatically exits the

settings mode and the settings you made aresaved.

Activating/deactivating the alarm clock

•Press the Alarm button (8) repeatedly to activate/deactivate the alarm time.

•Ifthe alarm is activated, the corresponding symbol is displayed.

Stopping the alarm clock/snooze function

•Ifthe alarm is triggered, an alarm signal will sound for 2minutes. The frequency of

the alarm signal increases the longer the alarm continues.

•Press the ALARM button (8) to stop the alarm.

Note –Snooze function

•While the alarm signal is sounding, press the SNOOZE/LIGHT button (12) to

activate the snooze function.

begins to ash on the display.The alarm signal will be stopped for 10 minutes,

after which it will sound again.

5.4. Temperature indicator

•Press the -/°C/°F button (11) to choose between °C and °F for the temperature

display.

6. Care and Maintenance

•Only clean this product with aslightly damp, lint-free cloth and do not use aggressive

cleaning agents.

•Make surethat water does not get into the product.

7. Warranty Disclaimer

Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting

from improper installation/mounting, improper use of the product or from failuretoobserve

the operating instructions and/or safety notes.

8. Declaration of Conformity

Hereby,Hama GmbH &CoKG declares that the radio equipment type

[00176910, 00176911, 00176912, 00186304, 00186305] is in compliance

with Directive 2014/53/EU.The full text of the EU declaration of conformity

is available at the following internet address: www.hama.com -> 00176910, 00176911,

00176912, 00186304, 00186305->Downloads.

1. Bedienungselemente und Anzeigen

1. Uhrzeit

2. Datum

3. Tag

4. Temperatur

5. DCF-Funksignal

6. DST–Sommerzeit

7. Alarmsymbol

8. ALARM-Taste

=Einstellung Wecker /Aktivierung/

Deaktivierung Wecker

9. MODE-Taste

=Einstellungen/Bestätigung des

Einstellungswerts

10. +/RCC-Taste

=Aktivierung/Deaktivierung

manueller Funksignal-Empfang/

Wechsel 12-/24-Stundenformat

/Erhöhung des aktuellen

Einstellungswerts

11. -/°C/°F-Taste

=Verminderung des aktuellen

Einstellungswerts/Wechsel zwischen

°C und °F

12. SNOOZE/LIGHT-Taste

=Aktivierung

Hintergrundbeleuchtung/

Unterbrechung des Wecksignals für

ca. 10 Minuten

13. Batteriefach

DBedienungsanleitung

2. Packungsinhalt

•Funkwecker Cube

•2AAA Batterien

•diese Bedienungsanleitung

3. Sicherheitshinweise

•Benutzen Sie das Produkt nicht in Bereichen, in denen elektronische Produkte nicht

erlaubt sind.

•Positionieren Sie das Produkt nicht in der Nähe von Störfeldern, Metallrahmen,

Computern und Fernsehern etc. Elektronische Geräte sowie Fensterrahmen

beeinträchtigen die Funktion des Produktes negativ.

•Versuchen Sie nicht, das Produkt selbst zu warten oder zu reparieren. Überlassen Sie

jegliche Wartungsarbeit dem zuständigen Fachpersonal.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Sveglia popolari di altre marche

Steren

Steren CLK-210 Manuale utente

COP-USA

COP-USA ALCDVR32-SL Manuale utente

Philips

Philips HF3505/70 Manuale tecnico

Casio

Casio PQ-70 Manuale utente

iHome

iHome IA63 Manuale utente

Coopers

Coopers 9765 Manuale utente

ANJANK

ANJANK AC-190 Guida

TFA

TFA 98.1075 Manuale utente

Sharper Image

Sharper Image 204050 Manuale utente

Lumie

Lumie Zest Manuale utente

Dexford

Dexford RCT200 Manuale utente

Philips

Philips AJL303/37B Manuale utente

RST

RST Q754 Manuale utente

iHome

iHome iKT50 Manuale utente

Sony

Sony dash HID-B7 Manuale utente

SVINZ

SVINZ SCC009 Manuale utente

Clas Ohlson

Clas Ohlson 918863 Manuale utente

IKEA

IKEA FNURRA Manuale utente