Hamilton Beach 53602-CN Manuale utente
BEFORE USE
使用前阅读
Questions?
Please call us – our friendly
associates are ready to help.
China: 400-852-2655
使用产品前请仔细阅读本使用说明书，
并妥善保管。
Visit www.hamiltonbeach.cn for our
complete line of products and Use and
Care Guides – as well as
delicious recipes, tips, and
to register your product online!
有关我们所有系列产品的使用与维护指
南
–
以及美味食谱、生活小贴士和
产品在线注册的更多信息，请访问
www.hamiltonbeach.cn
。
如有疑问？
请致电我们，我们的团队
随时准备为您提供帮助。
中国大陆客服热线：
400-852-2655
官方网站：www.hamiltonbeach.cn
型号：53602-CN
此说明书中图片仅供参考，
产品以实物为准。
English ..................... 2
简体中文 ................ 14
Quiet Blender
静音罩破壁机
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and/or injury to persons, including the following:
1. Read all instructions.
2.
This appliance is not intended for use by persons
with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety.
3. This appliance should not be used by children.
Keep the appliance and its cord out of reach
of children. Children should be supervised to
ensure they do not play with the appliance.
4.
T
o protect against risk of electrical shock, do
not put cord, plug, base, or motor in water or
other liquid.
5. Unplug cord from socket when not in use,
before putting on or taking off parts, and before
cleaning.
6. Flashing light indicates ready to operate. Avoid
contact with moving parts.
7. Do not operate any appliance with a damaged
supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged
in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer,
its service agent, or similarly qualified persons
in order to avoid a hazard. Call the provided
customer service number for information on
examination, repair, or adjustment.
8. The use of attachments, including canning jars,
not recommended or sold by the appliance
manufacturer may cause a risk of injury to
persons.
9. Do not use outdoors.
3
10. Do not let cord hang over edge of table or
counter or touch hot surfaces, including stove.
11. Do not place on or near a hot gas or electric
burner, or in a heated oven.
12. Blades are sharp; handle carefully—especially
when assembling, disassembling, or cleaning
inside blender jar.
13. Do not use a broken, chipped, or cracked blender
jar.
14. To reduce the risk of injury, never place cutting
blade assembly on base without jar properly
attached.
15. Do not blend hot liquids in the personal jar.
16. Do not use broken, cracked, or loose cutting
blade assembly.
17. Always operate blender with lid in place.
18. Be careful if hot liquid is poured into blender as
it can be ejected out of appliance due to sudden
steaming.
19. When blending hot liquids, open the center vent
lid and close any edge cover opening intended
for pouring. To prevent possible burns: Do not
exceed the 3-cup (710-ml) level. Hot liquids may
push off lid during blending; start blending at
lowest speed.
20. Ensure collar on base of blending jar and
personal jar are tight and secure. Injury can result
if moving blades accidentally become exposed.
21. If the jar should twist or rotate when the motor
is switched ON, switch OFF ( ) immediately and
tighten jar in collar.
22. Do not leave blender unattended while it is
operating.
23. To disconnect cord, switch to OFF ( ). Then
remove plug from wall socket.
24. Do not use appliance for other than intended
purpose.
4
SAVE THESE INSTRUCTIONS
25. CAUTION! In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.
26. Do not operate more than 2 minutes ON at a
time.
27. Do not defeat the Quiet Shield interlock.
Other Consumer Safety Information
This appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices, and other working
environments;
– farm houses;
– by clients in hotels, motels, and other residential-type
environments;
– bed and breakfast-type environments.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in or tripping over a
longer cord. If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the extension cord must
be equal to or greater than the rating of the appliance. Care must
be taken to arrange the extension cord so that it will not drape
over the countertop or tabletop where it can be pulled on by
children or accidentally tripped over.
If the cutting unit blades lock and do not move, it will damage
the motor. Do not use. Call the customer service number for
information.
Do not place blender jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
5
Glass Blender Jar
Parts and Features BEFORE FIRST USE: After unpacking blender, wash everything except blender
base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp
cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken
when cleaning inside of blender jar as cutting blade assembly is very sharp.
Lid
Two-Piece Removable
Quiet Shield
Cutting Blade
Assembly
Sound-Absorbing Jar Pad
20-oz. Personal Jar
Drinking Lid
Personal Blender Jar
(optional accessory
on select models)
Handle
ON (I)/OFF ( ) (Power) Switch
Pour Spout
Vent
Jar Collar
CANCEL Button
PULSE Button
Base
5 Speed Buttons
Program Buttons
Shield Locking Button
Shield Locking Button
Model: 53602-CN
Type: B91
Ratings:
220-240V~ 50-60Hz 400W
CONTROL PANEL
PULSE
CANCEL
SMOOTHIE
ICE CRUSH
CLEAN
6
Parts and Features (cont.)
Lid: The lid is easy to put on, take off, and clean. Always use lid when
machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON (I)/OFF ( ) (Power) Switch: The ON (I)/OFF ( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
Program Buttons: There are three program settings:
SMOOTHIE (), ICE CRUSH ( ), and CLEAN ( ).
Select desired program by pressing button for that
program.
5 Speed Buttons: Five speeds start at low and increase to high.
PULSE ( ) Button: Press and hold down PULSE
button to blend at high speed setting.
CANCEL ( ) Button: Stops blender at any time.
Quiet Shield: The Quiet Shield reduces amount of
noise from your blender. When placed over blender
jar, it muffles sound that your blender produces.
Always operate blender with Quiet Shield in place.
Personal Blender Jar: The personal blender jar makes it easier to
make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 13.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
our customer care center to obtain replacement parts.
Selecting Blender Settings: Select from three program settings or
five speed buttons from low to high ().
wWARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.
7
IMPORTANT: The blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
customer service number to obtain replacement parts.
1. Make sure blender is
unplugged. Place blender
base on clean, dry surface.
Place cutting blade assembly,
blade side up, through
opening in blending jar before
twisting collar onto bottom of
jar. Add Ingredients.
2. Place lid on jar. Place blender
jar on base.
3. Jar handle should be placed
with the mark range. 4. To assembly back shield.
Press both shield locking
buttons in while sliding back
shield around the base.
Using Your Blender
8
PROGRAM SETTINGS: Programs are optimized for recipe categories
and vary in blending speed and duration. The blender automatically
stops at the end of the program. Some recipes may require more or
less blending time.
(SMOOTHIE) – Blends frozen or fresh smoothies.
(ICE CRUSH) – Breaks ice into pieces small enough for slushies or
fine cocktails, using 1 to 1 1/2 cups (237 to 355 ml) ice cubes.
(CLEAN) – Add 5 cups (1.2 L) warm water and two drops dish
detergent to blender jar before starting the program for easy cleaning.
Rinse and dry.
6. Close Quiet Shield. Blender
will not operate until the
back Quiet Shield locked
at the right position and
the front Quiet Shield door
is completed in the down
position at same time.
5. To secure, press back shield
and blender base together.
7. Plug into outlet. Press ON (I)/
OFF ( ) switch to turn on
power to blender. The control
panel will flash and CANCEL
() button will continue to
flash, indicating blender is
ready for blending. Press
ON (I)/OFF ( ) switch to OFF
() position anytime machine
is left unattended.
Using Your Blender (cont.)
9
Using Manual Mode
1. Select speed and push
button.
2. Press a different speed button
during blending to increase
or decrease blending speed.
If using PULSE ( ), blender
will run at the high speed only
when PULSE ( ) button is
held down.
3. At end of blending cycle,
press CANCEL () button
to stop blending. Turn off
blender with ON (I)/OFF ( )
switch on right side of base.
Unplug blender from power
supply.
4. wWARNING Burn
Hazard. Do not fill blender
jar with hot liquid beyond the
3-cup (710-ml) level. Start
blending at lowest speed.
5. Lift Quiet Shield.
wWARNING Burn Hazard.
Metal parts
under blending
jar get hot after
extended use.
6. Remove blender jar. 7. Pour with lid on.
10
Using Personal Jar (optional)
1. Add ingredients. Carefully
place cutting blade assembly
and collar onto personal jar.
2. Turn personal jar upside
down and shake. Place onto
base.
3. Close Quiet Shield and plug
blender into outlet. Press
ON (I)/OFF ( ) switch to turn
on power to blender. Push
desired speed button. When
using PULSE ( ) button, the
blender will only run when
PULSE ( ) button is held
down. Press CANCEL ()
button to stop blending.
wWARNING Burn Hazard.
Do not blend hot ingredients.
Pressure may build, causing jar
to pop off and hot ingredients to
erupt.
wWARNING Laceration Hazard.
Handle blade carefully; it is very
sharp. Make sure unit is turned
OFF ( ) and is unplugged.
4. Unplug. Turn off blender with ON
(I)/OFF ( ) switch on right side of
base. Lift Quiet Shield. Remove
personal jar from base. Turn
bottom up; remove collar and
cutting blade assembly from jar.
5. Hand-tighten drinking lid onto
personal jar.
Indice
Altri manuali Hamilton Beach Miscelatore
Hamilton Beach
Hamilton Beach 52145H Manuale utente
Hamilton Beach
Hamilton Beach HBF500 Manuale utente
Hamilton Beach
Hamilton Beach 840243701 Manuale utente
Hamilton Beach
Hamilton Beach 58175 Manuale utente
Hamilton Beach
Hamilton Beach 58928-CE Manuale utente
Hamilton Beach
Hamilton Beach 50157 Manuale utente
Hamilton Beach
Hamilton Beach HBH855 Series Manuale utente
Hamilton Beach
Hamilton Beach HBH850 - 64 oz Commercial Blender Manuale utente
Hamilton Beach
Hamilton Beach 52230C Manuale utente
Hamilton Beach
Hamilton Beach Aguas Frescas 50162 Manuale utente
Hamilton Beach
Hamilton Beach Space-Saving Blender Manuale utente
Hamilton Beach
Hamilton Beach 51142 Manuale utente
Hamilton Beach
Hamilton Beach 58141 Manuale utente
Hamilton Beach
Hamilton Beach Turbo-Twister 59770 Manuale utente
Hamilton Beach
Hamilton Beach Tempest Series Manuale utente
Hamilton Beach
Hamilton Beach 58146-CL Manuale utente
Hamilton Beach
Hamilton Beach 840193603 Manuale utente
Hamilton Beach
Hamilton Beach MultiBlend 58151-SC Manuale utente
Hamilton Beach
Hamilton Beach HB12 Manuale utente
Hamilton Beach
Hamilton Beach 1G901 Manuale utente
