Hammer A2-26 Manuale utente

Operating instructions

Keep this manual to hand and in good condition for future reference!

Please read this operating manual carefully before using the machine!

Translation of the original operating instructions

A2-26

Planer thicknesser

Download your local language

http://fg.am/ba-manuals

CZ ESDEDA EN

HUFR PL

RO RU

511010-901, 1, en_GB

FELDER KG

KR-Felder Straße 1, 6060 HALL in Tirol, AUSTRIA

Telephone: +43 5223 5850 0

Email: info@felder-group.com

Internet: www.felder-group.com

A2-26

Table of contents

1 Information about the manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Symbol legend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.2 Contents of the operating manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.3 Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4 Liability and warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.5 Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.1 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.2 Making changes and modifications to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.3 Responsibilities of the operator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.4 Requirements of the personnel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Work safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.6 Personal protective equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.6.1 Prohibitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.6.2 Mandatory safety equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.7 Residual risks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.7.1 Transport, setup, installation and disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.7.2 Operate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.7.3 Maintain and troubleshoot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.8 Foreseeable misuses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4 Technical information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.1 Dimensions and weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

4.2 Operation and storage conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.3 Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.4 Drive motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.5 Planing unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.6 Dust extraction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.7 Dust emission. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.8 Noise level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5 Machine overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Overview control elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.2 Pictograms, signs and labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

5.3 Information on the machine data plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.4 Operation and display elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.4.1 Thicknessing unit controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5.4.2 Planer controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Table of contents

5.5 Safety devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.5.1 Safety limit switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

5.5.2 Cutterblock cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5.5.3 Kickback guards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.6 Optional equipment and accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.6.1 Digital display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

5.6.2 Rolling carriage and lifting bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6 Transporting, packing, storing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.1 Transport inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.2 Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.3 Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.4 Transport locking device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.5 Information relating to transportation and unloading. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

6.6 Means of transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.6.1 Unloading with a pallet truck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

6.6.2 Transporting with a forklift. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

6.6.3 Transport with a rolling carriage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

7 Setup and installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

7.1 Requirements of the location, where the machine is to be installed. . . . . . . . . . . . . . . . . . 37

7.2 Set-up and level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

7.3 Install. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

7.3.1 Assemble the planer fence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

7.3.2 Mount the planer fence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

7.3.3 Mount the cutterblock cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

7.3.4 Mount the handwheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

7.4 Install the dust extraction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.5 Connect electrics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

7.5.1 Connect the machine plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

8 Adjustments and tool changes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1 Adjusting the planer unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1.1 Adjust the planer cutterblock depth of cut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1.2 Adjusting the joint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

8.1.3 Adjust outfeed planer table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

8.1.4 Check the setting of the planer table on the outfeed side. . . . . . . . . . . . . . . . . . . . . . . . 49

8.1.5 Adjusting the planer fence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

8.1.6 Changing over from a planer to a thicknesser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

8.2 Changing over from the thicknesser to the planer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

8.3 Adjust the thicknesser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

8.3.1 Thicknesser clearance height - general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

8.3.2 Thicknessing bed adjustment with handwheel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

A2-26

Table of contents

9 Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

9.1 Switch on / switch off / shutdown due to an emergency stop. . . . . . . . . . . . . . . . . . . . . . 56

9.2 Planing - General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

9.2.1 Working positions - Planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

9.2.2 Permitted processing techniques planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

9.2.3 Prohibited work techniques planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

9.2.4 Workpiece dimensions (planing). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

9.2.5 Work process with permitted working methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

9.3 Processing techniques when planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

9.3.1 Planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

9.3.2 Planing the narrow edge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

9.3.3 Planing of smaller workpieces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

9.3.4 Bevelling and chamfering. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

9.4 Thickness planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.4.1 Working positions - thickness planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.4.2 Authorised thickness planing working methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.4.3 Prohibited thickness planing working methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

9.4.4 Workpiece dimensions (thickness planing). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

9.4.5 Thickness planing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

10 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

10.1 Maintenance schedule. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

10.2 Cleaning and lubricating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

10.3 Clean the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

10.4 Preparation - Remove the maintenance cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

10.5 Transport rollers and kickback guards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

10.6 Check belt tension and belt condition. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

10.7 Drive chain feed rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

10.8 Lubricate the thicknessing table height adjustment spindles. . . . . . . . . . . . . . . . . . . . . . . . 73

10.9 Check safety devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

11 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

11.1 What to do in the event of malfunctions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

11.2 What to do after rectifying the fault. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

11.3 Faults, causes and repairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

11.4 Correct the planing fence angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

11.5 Tighten/replace the drive belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

11.6 Reversing/replacing the system planer blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

12 Attachment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

12.1 About spare parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

12.2 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Table of contents

12.3 Spare parts list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

12.4 Circuit diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

A2-26

Information about the manual

1 Information about the manual

1.1 Symbol legend

Safety instructions

Safety instructions in this manual are indicated with symbols. The safety instruc-

tions are introduced by key words which state in words the extent of the hazard.

Comply with safety instructions under all circumstances, and act with care in order

to avoid accidents, personal injury, or material damage.

DANGER

… indicates a situation of immediate danger which will result in

death or severe injuries if it is not avoided.

WARNING

… indicates a situation of possible danger which can result in

death or severe injuries if it is not avoided.

CAUTION

… indicates a situation of possible danger which can result in

minor or slight injuries if it is not avoided.

NOTICE

… indicates a situation of possible danger which can result in

material damages if it is not avoided.

Tips and recommendations

… emphasises useful tips and recommendations as well as infor-

mation for efficient and trouble-free operation.

1.2 Contents of the operating manual

●This operating manual describes the safe and proper use of the machine.

●All specified safety information and instructions as well as the local accident

prevention regulations and general safety regulations applicable to the area

of use must be adhered to.

●All instructions in this manual must be strictly followed without exception.

●The operating manual is an integral part of the machine. It must therefore be

kept in the direct vicinity of the machine and be accessible at all times.

●The operating manual must always accompany the machine.

Information about the manual

1.3 Copyright

●This instruction manual is to be treated as confidential. It is intended solely

for those people who are to work on or with the machine.

●All descriptions, texts, drawings, photos and other depictions are protected

by copyright and other commercial laws.

●Any unauthorised use is prohibited.

●This manual, in its entirety or parts thereof, may not be transferred to

third parties or copied in any way or form, and its contents may not be

used or otherwise communicated without the express written consent of the

manufacturer. Infringement of these rights may lead to a claim for compensa-

tion. The right to further claims is reserved.

●We reserve all rights in exercising commercial protection laws.

1.4 Liability and warranty

●The contents and instructions in this manual have been compiled in consider-

ation of current regulations and state-of-the-art technology as well as based

on our know-how and experience acquired over many years.

●The manufacturer shall not be liable for damage and/or faults resulting from

the disregard of instructions in the manual.

●The text and images do not necessarily represent the exact product that has

been delivered. The images and graphics are not depicted on a 1:1 scale.

The product that has been delivered, may have custom-built specifications,

add-on options or recent technical modifications and may therefore deviate

from the descriptions, instructions and images contained in the manual.

●We reserve the right to make technical changes to the product in order to

improve the properties of use and further product development.

●The guarantee period is in accordance with national guidelines. Details may

be found on our website, www.felder-group.com.

●Should any questions arise, please contact the manufacturer.

1.5 Training

●All those appointed to work on or with the machine must have fully read and

understood the manual before commencing any work. This requirement must

be met even if the appointed person is familiar with the operation of such a

machine or a similar one, or has been trained by the manufacturer.

●Knowledge about the contents of this manual is a prerequisite for protecting

personnel from hazards and avoiding mistakes so that the machine may be

operated in a safe and trouble free manner.

●It is recommended that the operator requests proof from the personnel that

the contents of the manual have been read and understood.

A2-26

Safety instructions

2 Safety instructions

2.1 Intended use

●The machine described in this manual is intended solely for the processing

of wood, synthetic materials, and similar machinable materials. Operational

safety is only guaranteed when the machine is used for the intended pur-

poses.

●Any use, other than that of the machine‘s intended purpose shall be consid-

ered improper and is therefore not permitted. All claims regarding damage

resulting from improper use that are made against the manufacturer and its

authorised representatives will be rejected.

●The operator is solely liable for any damage that results from improper use

of the machine.

●The term “proper use” also refers to correctly observing the operating con-

ditions as well as the specifications and instructions in this manual. The

machine may only be operated with parts and accessories recommended by

the manufacturer.

2.2 Making changes and modifications to the machine

●In order to avoid potential hazards and to ensure optimum performance, no

modifications, alterations or changes may be made to the machine that have

not been explicitly approved by the manufacturer.

●All the pictograms, signs and labels affixed to the machine must be kept

visible, readable and may not be removed.

●Pictograms, signs and labels that have become damaged or unreadable

must be replaced promptly.

2.3 Responsibilities of the operator

●This manual must be kept in the immediate vicinity of the machine.

●The manual must be accessible at all times to all persons working on or with

the machine.

●The machine may only be operated if it is in proper working order and in

safe condition.

●The general condition of the machine must be checked and the machine

must be inspected for visible defects each time before it is switched on.

●Do not leave the machine running unattended.

●Secure the switched-off machine against unauthorised operation (padlock on

the main switch, remove the key from the operating mode selector switch,

block off the area around the machine, pull out the mains plug etc.).

●In addition to the safety advice and instructions specified in this operating

manual, any local accident prevention regulations and general safety regula-

tions applicable to the machine's area of use, as well as any applicable

environmental protection regulations, must be observed and complied with.

●The operator and designated personnel are responsible for the trouble-free

operation of the machine as well as for clearly establishing who is in charge

of installing, servicing, maintaining and cleaning the machine. Keep children

away from machines, tools and accessories.

Safety instructions

2.4 Requirements of the personnel

●Only authorised and trained personnel may work on and with the machine.

"Qualified personnel" is a term that refers to those who – due to their

professional training, know-how, experience, and knowledge of relevant reg-

ulations – are in a position to assess delegated tasks and recognise potential

risks.

●Personnel must be briefed about all functions and potential dangers of the

machine.

●If the personnel lack the necessary knowledge for working on or with the

machine, they must be trained. Responsibility for working with the machine

(installation, service, maintenance, overhaul) must be clearly defined and

strictly observed.

●Only those people who can be expected to carry out their work reliably may

be given permission to work on or with the machine.

●Personnel must refrain from working in ways that could harm others, the

environment or the machine itself.

●It is absolutely forbidden for anyone who is under the influence of drugs,

alcohol or reaction-impairing medication to work on or with the machine.

●When appointing personnel to work on the machine, it is necessary to

observe all local regulations regarding age and professional status.

●The machine may only be operated by an adult, that is without mental

limitations or under the supervision of such a person.

●All operators must ensure that unauthorised persons are kept at a safe dis-

tance from the machine.

●Personnel are obliged to immediately report any irregularities with the

machine that might compromise safety to the operator.

2.5 Work safety

●Following the safety advice and instructions given in this manual can prevent

bodily injury and material damage while working on and with the machine.

●Failure to observe these instructions can lead to bodily injury and damage to

or destruction of the machine.

●Disregard of the safety advice and instructions given in this manual as well

as the accident prevention regulations and general safety regulations appli-

cable to the operative range of the machine shall release the manufacturer

and their authorised representatives from any liability and from any compen-

sation claims.

2.6 Personal protective equipment

2.6.1 Prohibitions

When working on or with the machine, the following must be strictly observed:

Please note

Long, loose hair is forbidden.

With long hair and beards a hair net must be worn.

Indice

Altri manuali Hammer Pialla

Hammer

Hammer A3-26 Manuale utente

Manuali Pialla popolari di altre marche

Felisatti

Felisatti PF180/1500 Manuale utente

DeWalt

DeWalt DW 1150 Guida

Triton

Triton TRP UL Guida rapida

Melbourne

Melbourne MTC-49407 Manuale utente

VARO

VARO POWERplus POW1520 Manuale utente

Powermatic

Powermatic 209 Manuale di servizio

Skil

Skil 1565 Manuale utente

Makita

Makita 1051D Manuale utente

Scheppach

Scheppach Plana 3.0 Istruzioni per il montaggio

Grizzly

Grizzly G1033X Manuale utente

Stanley

Stanley STPP7502 Manuale utente

Palmgren

Palmgren 84115 Manuale utente

Draper

Draper PT610V Manuale utente

Makita

Makita PC5000C Manuale utente

Berner

Berner BP 40-82 C Manuale utente

Grizzly

Grizzly G0603X Manuale utente

King Industrial

King Industrial CT-381FX Manuale utente

FXA

FXA FXAJD8220 Manuale utente