Hammerhead HDHD060 Manuale utente
6.0 AMP HAMMER DRILL
MODEL HDHD060
ATTACH YOUR RECEIPT HERE
Serial Number _____________________ Purchase Date ______________________
Questions, problems, missing parts? Before returning to your retailer, call
our customer service department at 1-877-888-1880, 8:30 a.m. – 8:00 p.m.
EST (Monday – Friday) & 10:00 a.m. – 6:00 p.m. EST (Saturday and Sunday).
2 6.0 AMP HAMMER DRILL
TABLE OF CONTENTS
Product Specifications ....................................................2
Safety Information .......................................................3
Preparation.............................................................7
Package Contents........................................................8
Operating Instructions ....................................................9
Care and Maintenance ...................................................17
Troubleshooting ........................................................18
Warranty..............................................................18
PRODUCT SPECIFICATIONS
COMPONENT SPECIFICATIONS
Motor 120V~, 60Hz, 6.0A
No-load speed 0-2,700 RPM
Hammer speed 0-43,200 BPM
Keyed chuck 1/2" (13 mm)
Maximum drilling capacity:
In wood
In metal
In concrete
1" (25.4 mm)
1/2" (13 mm)
1/2" (13 mm)
Tool weight 4 lbs. 14 oz. (2.2 kg)
6.0 AMP HAMMER DRILL 3
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or operate
this product. If you have any questions regarding the product, please call Hammerhead
customer service at 1-877-888-1880, 8:30 a.m. – 8:00 p.m. EST (Monday – Friday) &
10:00 a.m. – 6:00 p.m. EST (Saturday and Sunday).
WARNING
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power-tool operation, always
wear safety goggles or safety glasses with side shields and a full-face shield, when
needed. We recommend using a wide vision safety mask over eyeglasses or standard
safety glasses with shields. Always use eye protection marked to comply with ANSI Z87.1.
DANGER
People with electronic devices, such as pacemakers, should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemical: work in a well-ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to filter
out microscopic particles.
4 6.0 AMP HAMMER DRILL
SAFETY INFORMATION
Know the Tool
To operate this tool, carefully read this manual and all labels affixed to the hammer drill
before using it. Keep this manual available for future reference.
Some of the following symbols may be used on this hammer drill. Please study them and
their meaning. Proper interpretation of these symbols will allow you to operate the tool
better and more safely.
SYMBOL DEFINITION SYMBOL DEFINITION
VVolts n 0No-load Speed
AAmps /min Revolutions, Strokes, Beats or
Impacts per Minute
Hz Hertz Class II Construction
WWatts Direct Current
A danger, warning or caution.
It means ‘ATTENTION! Your
safety is involved.’
Alternating Current
IMPORTANT: This tool should only be serviced only by a qualified service technician.
IMPORANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS-This manual contains important safety and operating
instructions for hammer drill Model HDHD060.
DANGER
To reduce the risk of fire or electric shock, carefully follow these operating instructions
General Power Tool Safety Warnings
WARNING
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
6.0 AMP HAMMER DRILL 5
SAFETY INFORMATION
Work Area Safety
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can
cause you to lose control.
Electrical safety
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tools in a damp location is unavoidable, use a ground-fault circuit
interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.
Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may
result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
6 6.0 AMP HAMMER DRILL
SAFETY INFORMATION
• Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in
moving parts.
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust devices can
reduce dust related hazards.
Power Tool Use and Care
• Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and more safely at the rate for which it was
designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6.0 AMP HAMMER DRILL 7
SAFETY INFORMATION
Specific Safety Rules for Hammer Drill
• Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
• Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
• Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal
injury.
• Do not use the power tool with a damaged cord. Do not touch the damaged
cord and pull the plug from the outlet when the cord is damaged while working.
Damaged cords increase the risk of an electric shock.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held
more secure than by hand.
• Always wait until the power tool has come to a complete stop before placing it
down. The tool insert can jam and lead to loss of control over the power tool.
PREPARATION
Before attempting to use the hammer drill, familiarize yourself with all of its operating
features and safety requirements.
8 6.0 AMP HAMMER DRILL
PACKAGE CONTENTS
N
L
G
I
A
M
J
K
H
EF
B
C
D
PARTS DESCRIPTION
AChuck jaws
BChuck
CChuck-key holes
DChuck sleeve
EHammer / drilling selection switch
FDepth-stop gauge
GLock-on button
HChuck key
IChuck-key strap
JVariable-speed trigger switch
KSpeed adjustment dial
LDirection-of-rotation lever
MAuxiliary handle
NPrimary handle
6.0 AMP HAMMER DRILL 9
OPERATING INSTRUCTIONS
1. Variable-Speed Trigger Switch
a. Connect the power cord of your
hammer drill to a standard
household power outlet.
b. To turn the hammer drill ON, press
the trigger switch.
c. To turn the hammer drill OFF,
release the trigger switch.
NOTICE: The variable-speed trigger
switch delivers higher speed with
increased trigger pressure and lower
speed with decreased trigger pressure.
2. Lock-On Button
This hammer drill is equipped with a
lock-on button, which is convenient
for continuous drilling for extended
periods of time.
a. To drill continuously, press and
hold the trigger switch and then
press the lock-on button. Release
the trigger switch.
b. To unlock the lock-on button and
stop continuous drilling, press the
trigger switch and the lock-on
button will release automatically.
1
VARIABLE-
SPEED TRIGGER
SWITCH
2
LOCK-ON
BUTTON
10 6.0 AMP HAMMER DRILL
OPERATING INSTRUCTIONS
3. Speed Adjustment Dial
This hammer drill is equipped with a
speed adjustment dial; the required
speed may be adjusted according to
the material and the working condi-
tions.
The speed adjustment dial can be
adjusted even if the drill is running.
Turn the variable-speed adjustment
dial counterclockwise for a higher
speed range; turn the variable-speed
adjustment dial clockwise for a lower
speed range.
4. Direction-Of-Rotation Selector
The direction of bit rotation is revers-
ible and is controlled by a selector
located above the trigger switch. With
the drill held toward you:
a. Position the direction-of-rotation
selector to the right of the tool for
forward rotation.
b. Position the direction-of-rotation
selector to the left of the tool for
reverse rotation.
NOTICE: To prevent gear damage, always
allow the hammer drill to come to a complete stop before changing the direction of rotation.
3
SPEED
ADJUSTMENT DIAL
4
DIRECTION-
OF-ROTATION
SELECTOR
REVERSE FORWARD
Indice
Lingue:
Altri manuali Hammerhead Trapano
