Hand Held Products IMAGETEAM 5620 Guida utente
™
IMAGETEAM™ 2020/5620
Cordless System
System Manual
Disclaimer
Hand Held Products, Inc. (“Hand Held Products“) reserves the right to make
changes in specifications and other information contained in this document
without prior notice, and the reader should in all cases consult Hand Held
Products to determine whether any such changes have been made. The
information in this publication does not represent a commitment on the part of
Hand Held Products.
Hand Held Products shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages
resulting from the furnishing, performance, or use of this material.
This document contains proprietary information which is protected by copyright.
All rights are reserved. No part of this document may be photocopied,
reproduced, or translated into another language without the prior written consent
of Hand Held Products.
©2004-2005 Hand Held Products, Inc. All rights reserved.
Web Address: www.handheld.com
Microsoft Pocket PC 2002, Windows, Windows NT, Windows 2000, Windows ME,
Windows XP, ActiveSync, Outlook, and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A.
Statement of Agency Compliance
The IT2020/IT5620 system meets or exceeds the requirements of all applicable
standards organizations for safe operation. However, as with any electrical
equipment, the best way to ensure safe operation is to operate them according
to the agency guidelines that follow. Please read these guidelines carefully
before using your IT2020/IT5620 system.
Regulatory and Safety Approvals for the IT2020/IT5620
FCC Class B Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
••Reorient or relocate the receiving antenna.
••Increase the separation between the equipment and receiver.
••Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
••Consult the dealer or an experienced radio or television technician for help.
Parameter Specification
USA FCC Part 15, Class B
Canada ICES-003
European Community EN 55022 (CISPR 22) Class B
EN60950
EN60825-1
EN55024:1998
If necessary, the user should consult the dealer or an experienced radio/
television technician for additional suggestions. The user may find the following
booklet helpful: “Something About Interference.” This is available at FCC local
regional offices. Hand Held Products, Inc. is not responsible for any radio or
television interference caused by unauthorized modifications of this equipment
or the substitution or attachment of connecting cables and equipment other than
those specified by Hand Held Products, Inc. The correction is the responsibility
of the user. Use only shielded data cables with this system.
In accordance with FCC 15.21, changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
This device and its antenna must not be co-located or operating
in conjunction with any other antenna or transmitter. To maintain
compliance with FCC RF exposure guidelines for body-worn
operation, do not use accessories that contain metallic
components and ensure that the device is at least 15mm (0.6
inches) from the body.
Canadian Compliance
This Class B digital apparatus compiles with Canadian ICES-003. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
3. To prevent radio interference to the licensed service, this device is intended
to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is
subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du
Canada.
CE Compliance
The CE mark on the product indicates that the system has been tested
to and conforms with the provisions noted within the 89/336/EEC
Electromagnetic Compatibility Directive and the 73/23/EEC Low Voltage
Directive.
For CE-related inquiries, please contact:
Hand Held Products, Inc.
Nijverheidsweg 9
5627 BT Eindhoven
The Netherlands
!
Hand Held Products shall not be liable for use of our product with equipment
(i.e., power supplies, personal computers, etc.) that is not CE marked and does
not comply with the Low Voltage Directive.
Regulatory Approvals for Bluetooth Radio Devices
RF devices are designed to comply with the most current applicable standards
on safe levels of RF energy developed by the Institute of Electrical and
Electronics Engineers (IEEE) and the American National Standards Institute
(ANSI) and have been recommended for adoption by the Federal
Communications Commission (FCC).
Bluetooth Radio Device R&TTE Compliance Statement
These devices are in conformity with all essential requirements of the R&TTE
Directive (1999/5/EC). This equipment has been assessed to the following
standards:
This product is marked with in accordance with the product
requirements specified in the R&TTE Directive, 1999/5/EC.
The equipment is intended for use throughout the European Community.
Bluetooth Qualified Product
Bluetooth Qualified Body approved as a Bluetooth Class II radio.
Parameter Specification
RF Approvals
U.S.A. FCC Part 15.247
Canada RSS 210
Parameter Specification
R&TTE EN 300 328-2:2000
EN 301 489-1 (2002-08)
EN 301 489-17 (2002-08)
EN 60950:2000
EN 50361:2001
UL and cUL Statement
UL listed UL1950 and CSA 22.2 No.950. cUL listed UL1950 and CSA 22.2 No
950.
TÜV Statement
TÜV or GS marked to EN60950 and EN60825-1.
C-Tick Statement
Conforms to AS/NZS 3548. C-Tick number: N10410.
Mexico
Patents
Please refer to the IT5620 packaging for patent information.
Solids and Water Protection
The IT5620 has a rating of IP41, immunity of foreign particles and dripping
water.
Certified
Required Safety Labels
IT5620
g
g
%
;0'
+
',
&
&)
%
;
0
%
&
,
DGD
QD&
F
Q,
VW
F
X
G
RU3GOH
+
G
Q
D
+
<1
V
OO
D)
V
H
OHWDHQDN
6
D
Q
L
K&
QL
HGD0
(
JQLGQH3VWQHWD3Q
J
LH
U
R
)
GQD68
(
7,
<526
6(&&$
'
MO
C
DL
E
HD
N
A
H
WWW
IT2020
i
Chapter 1 - Getting Started
About This Manual ............................................................... 1-1
Unpacking the System .......................................................... 1-2
Models .................................................................................. 1-2
Cordless System: Main Components.................................... 1-3
About the Battery.................................................................. 1-3
Proper Disposal of the Battery ....................................... 1-4
Base Charge Mode................................................................ 1-5
Linking Scanner to Base....................................................... 1-6
Scanner Modes...................................................................... 1-6
Unlinking the Scanner.................................................... 1-6
Single Scanner Operation ..................................................... 1-7
Locked Link Mode - Single Scanner ............................. 1-7
Open Link Mode - Single Scanner................................. 1-7
Override Locked Scanner............................................... 1-7
Multiple Scanner Operation.................................................. 1-8
Scanner Name....................................................................... 1-8
Changing Scanner Name - Serially ................................ 1-8
Changing Scanner Name - via Bar Codes...................... 1-9
Scanner Report.................................................................... 1-10
Application Work Groups................................................... 1-10
Application Work Group Selection.............................. 1-11
Resetting the Standard Product Default Settings:
Current Application Work Group .................................... 1-12
Resetting the Standard Product Default Settings: All
Application Work Groups................................................ 1-12
Using the Scanner with Bluetooth Devices ........................ 1-13
Changing Bluetooth PIN Code..................................... 1-13
Out-of-Range Alarm........................................................... 1-13
Duration........................................................................ 1-13
Alarm Sound Type ....................................................... 1-14
Data Accumulation Mode................................................... 1-14
Beeper and LED Sequences and Their Meaning................ 1-14
IT5620 LED Sequences and Their Meaning................ 1-15
IT2020 LED Sequences and Their Meaning................ 1-15
Table of Contents
ii
Basic Operation of the Cordless System............................. 1-16
System Conditions........................................................ 1-17
Communication Between the Cordless System
and the Host .................................................................. 1-18
Connecting the Base When Powered by Host
(Keyboard Wedge) ........................................................... 1-18
Reading Techniques ............................................................ 1-20
Resetting the Standard Product Defaults............................. 1-20
Plug and Play....................................................................... 1-20
Keyboard Wedge Connection ............................................. 1-21
Laptop Direct Connect.................................................. 1-21
RS-232 .......................................................................... 1-21
Wand Emulation Plug & Play ...................................... 1-22
IBM 4683 Ports 5B, 9B, and 17 Interface........................... 1-23
Connecting the Base with USB........................................... 1-24
IBM SurePos ................................................................ 1-25
USB PC or Macintosh Keyboard.................................. 1-25
USB HID ...................................................................... 1-26
USB Com Port Emulation ............................................1-26
Connecting the Base with Serial Wedge............................. 1-27
Chapter 2 - Terminal Interfaces
Terminal ID........................................................................... 2-1
Supported Terminals ............................................................. 2-2
Keyboard Country................................................................. 2-4
Keyboard Style...................................................................... 2-5
Keyboard Modifiers .............................................................. 2-6
Connecting the Base with RS-232 Serial Port ...................... 2-7
RS-232 Baud Rate ..........................................................2-8
RS-232 Word Length: Data Bits, Stop Bits, and Parity .2-9
RS-232 Handshaking.................................................... 2-10
Host ACK Selection ..................................................... 2-10
Host ACK Enable ......................................................... 2-11
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hand Held Products Scanner
Hand Held Products
Hand Held Products 3800ESD Manuale utente
Hand Held Products
Hand Held Products 3820 Manuale utente
Hand Held Products
Hand Held Products SCANTEAM 2070 BASE Manuale utente
Hand Held Products
Hand Held Products 3800ESD Istruzioni operative
Hand Held Products
Hand Held Products 4800dr Manuale utente
Hand Held Products
Hand Held Products IT4410 Manuale utente
Hand Held Products
Hand Held Products IT3800 Manuale utente
Hand Held Products
Hand Held Products 4800dr Manuale utente
Hand Held Products
Hand Held Products 3800ESD Istruzioni operative
