H&H AI-007 Manuale utente
www.hh.com.hk
t = 852.24813068
f= 852.24813727
Room 1117, 11/F, Asia Trade Centre, 79 Lei Muk Road, Kwai Chung, N.T., Hong Kong.
AI-007 Hot Air Sealing Machine
Operation Manual
is powered by
H&H Asia Group Limited
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 1 of 43
Table of Content
Precautions Regarding to Safety
Name Plate
Introduction
Specifications
Features
Identification of Components
Front View
Rear View
Cutter Assembly
Heater Positioning Assembly (Front)
Heater Positioning Assembly (Rear)
Main Air Filter Assembly
Compressed air ON/OFF Switch
Pressure Adjustment Panel
Power ON/OFF Switch
Principle of Seam Sealing
Preparation for Installation
Control Method
Touch Screen Control Panel
Foot Switch
Control Menu Navigation
Pressure Adjustment
Start Up And Shut Down Procedures
Start Up Procedures
Shut Down Procedures
Basic Operation
Temperature, Sealing Speed & Pressure Adjustment
Nozzle Position Adjustment
Procedures of Seam Sealing
Tape Cutting
Tape Loading
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 2 of 43
Table of Content (cont.)
Advance Operation
Quill Latch
Foot Hold
Differential Speed
Individual Program for Start/ Middle/ End of Tape
Digital Tensioner
Power Save Mode
Parameter Lock
Maintenance
Preventative
Procedures for Replacing Parts
Trouble Shooting
Appendix A Nozzle Air Flow Cross Reference Table
Appendix B Electrical Scheme
Appendix C Wiring Scheme
Appendix D Pneumatic Scheme
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 3 of 43
> Precautions Regarding to Safety
Please observe these safety tips for a safe, efficient, and injury free operation of your equipment. By
strictly following all instructions contained in this manual you will certainly obtain an excellent
performance from the use of this equipment for many years.
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 4 of 43
> Precautions Regarding to Safety (cont.)
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 5 of 43
> Name Plate
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 6 of 43
> Introduction
Thank you for choosing AI-007 hot air sealing machine by H&H.
The hot air sealing machine described in this manual is one of the most sophisticated machines in the
market today. Built on pure digital platform and designed for the professional users, AI-007
incorporated many new features that makes seam sealing much easier than before. Operators are
recommended to have basic knowledge and skill in seam sealing operation before using this machine.
In order to fully understand how to use this machine properly, and avoid damage to both the machine
and operating personnel, please read this manual carefully and keep it safe for future reference.
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 7 of 43
> Specifications
Model : AI-007
Voltage : AC 220 V
Frequency : 50/ 60 Hz
Power Consumption : 3600 W max, 1500 W typical
Compressed Air : 0.4 - 0.6Mpa
Air Consumption : 100 L/min max
Sealing Speed : 1 - 60 ft/min
Nozzle Temperature : 50 –800C
Nozzle Unit : 22.0 mm standard, other optional
Upper Roller Width : 25.4 mm
Lower Roller Width : 31.0 mm
Overall Dimensions : 1200 mm (L) x 700 mm (W) x 1800 mm (H)
Overall Weight : 120 kg
Note : due to continuous improvement, specifications are subjected to change without prior notification
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 8 of 43
> Features
Differential speed for top and bottom rollers, ideal for reducing stretch fabric puckering.
Digital tape releaser for stable operation.
Large size color operator interface.
Power saving mode.
Separate program for tape start/ tape middle/ tape end control.
Multi-function foot pedal for easy one-footed control operation.
Multi-lingual support for touch screen display interface
AI-007 operation manual
Issue 1 12.10.10, HMI version 13, plc version 29 P. 9 of 43
> Identification of Components
>> Front View
1. heater body
2. lower pedestal
3. adjustable floor stand
4. left foot pedal
5. right foot pedal
6. main control box
7. emergency push button
8. power ON/OFF switch
9. touch screen control panel
4
6
1
7
2
8
3
5
9
Indice
Altri manuali H&H Sistema di saldatura
