Handicare SystemRoMedic ReTurn 7600 Manuale utente
SystemRoMedicTM
Manual no: 721 Ver. 13 150819
ReTurn7600
SWL: 205kg/450lbs
7600
User manual – English
Bruksanvisning – Svenska
Brukermanual – Norsk
Brugsvejledning – Dansk
Käyttöohje – Suomi
Gebrauchsanweisung – Deutsch
Handleiding – Nederlands
Manuel d’utilisation – Français
Manuale utente – Italiano
Manual de usuario – Español
English
ReTurn7600 are used indoors for shorter transfers between wheelchair and bed, wheelchair and toilet/portable
toilet/wheelchair or chair/armchair. ReTurn7600 can also be used to aid repositioning farther back in the chair. ReTurn7600
is designed for easy manoeuvring and use in confined spaces. It is easy to assemble and disassemble in just two sections
for easier transport and storage.
Visual inspection
Check the condition and function of the assistive
device regularly. Always inspect the product after
laundering. Check to ensure that seams and material
are free from damage. Check to ensure that fabric
is not worn or faded. If there are signs of wear, the
product must be discarded.
Always read the user manuals for all assistive devices used
during a transfer. Keep the user manual where it is accessible
to users of the product. Always make sure that you have the
right version of the user manual. The most recent editions of
user manuals are available for downloading from our website,
www.handicare.com.
Check Safety Always read the user manual
A. Push the rising ladder/
tube down into the mounting
fixtures on the chassis, so
that the height-adjustment
buttons are facing towards
the caregiver.
B. Insert the fixture knobs
and tighten. Check to ensure
that the fixture knobs are
securely tightened before
using the ReTurn.
Assembly
• ReTurn is intended for shorter transfers.
• Return can only be used on flat floor.
• The caregiver must always apply counter pressure in a safe
way when the user is standing up, sitting down and during the
actual transfer.
Note! Always perform a risk assessment before using ReTurn.
Special requirements and conditionsTransport
The chassis and raising
ladder can be carried
separately. Carry the
chassis by holding the
tube on the front end of
the product.
Transport, e.g., by car,
and storage are easy,
since the ReTurn can
be disassembled in two
pieces.
To transfer with ReTurn, the user must be able to:
• support weight while standing
• stand up and maintain balance (with support)
• grasp handles
• understand instructions
A
B
3
MANUAL
SystemRoMedicTM
SystemRoMedicTM
ReTurn7600
English
The feet are placed one on either side, see foot markings on base plate.
The user’s weight must be centred on the product’s support surface (all
weight between the wheels); i.e., the user must be in a standing position.
The user’s weight must not be outside of the support surface.
Chassis and placement of feet
Adjust the lower-leg support
so that the upper edge of
the plate is about 3 cm/two
fingers below the lower edge
of the kneecaps. Pull the two
pins to loosen. Adjust to the
appropriate height.
Lower-leg support Brakes
There is a brake for each wheel. With your foot, press
down on the red marking on the brake plate. Press all
the way down.
To release the brake, press on the brake plate so that
it resumes its original position (green marking); ensure
that the wheels roll freely.
Testing standing function
ReTurn is ideal for testing a user’s
standing function in cases where
there is uncertainty as to whether
the user is able to rise from a seated
to a standing
position.
Training standing function
ReTurn can be used to train the
user’s standing, sitting and
sit-to-stand function. To measure
improvement, use a stopwatch or
clock with a second hand to time
the user.
Farther back in the chair
If the user slides forward in the wheelchair, the ReTurn
can be used to help the user to slide farther back in
the chair.
Remove/raise the wheelchair foot plates, and then run
the ReTurn in towards the wheelchair. The user places
his/her feet on the foot plate, grasps the raising ladder,
leans forward, and then lifts from the seat. The care-
giver provides counter pressure. Slide the user farther
back in the chair when he/she has lifted slightly from
the seat.
Ensure that the pins lock securely into place. The lower-leg
support can also be adjusted laterally.
Transfers
Bed to wheelchair
Place the wheelchair at some distance from the bed to allow enough working space. Lock the wheelchair wheels. Place the
user’s feet on the base plate. The user grasps the raising ladder, leans forward, and then raises himself/herself.
Pull the ReTurn back somewhat, and then steer in towards the wheelchair.
Position the ReTurn close enough to enable good placement in the wheelchair. The caregiver applies counter pressure
before the user sits down.
4MANUAL SystemRoMedicTM
English
Brake the wheels on the ReTurn. The user then leans
forward and grasps the handles on the ReTurn. The
caregivers then grasp the handles on the ReTurnBelt.
ReTurnBelt allows different gripping alternatives, and
helps and encourages the user to lean forward.
One caregiver helps the user to lean forward and
provides support during raising.
Using ReTurnBelt together with ReTurn7600
See manual for ReTurnBelt.
ReTurnBelt is used for raising from a seated to a standing position, and for support in the standing position in combination
with the use of ReTurn transfer platform. ReTurnBelt has a more rigid lower section for easy application and an elastic
upper section for a better and more comfortable fit. ReTurnBelt has several gripping alternatives and a locking strap for
extra support and safety in connection with the use of the ReTurn platform.
Do not secure the clasp on the ReTurnBelt before rising. When the user is
in a standing position facing the ReTurn, the strap can be placed around
one of the vertical handles.
Secure the clasp on the ReTurnBelt. A click is heard when the clasp is
secured.
Two caregivers with ReTurnBelt One caregiver with ReTurnBelt
Fasten the clasp without tensioning the strap. A click is heard
when the clasp is secured.
Brake the wheels on ReTurn.
The caregiver encourages the user to lean forward while pro-
viding support during raising by grasping either a handle or
the strap.
The user leans forward and grasps the handles on ReTurn.
When it is necessary to attach ReTurnBelt to ReTurn7600
Now, transfer the user with ReTurn. Plan carefully to ensure that the
transfer is as short as possible.
To toilet/shower chair
For transfers to the toilet, space is allowed for the caregiver to assist the user with the pants. The
back also has a small recess that allows the user to get close to the toilet and achieve a good
seated position.
Brake the wheels on the ReTurn. Ensure that the user is standing in a secure position facing the
ReTurn, so that the locking strap is loosened. Undo the clasp and remove the strap from the
ReTurn. Fold it under the edge of the belt, so that it does not catch on anything. Help the user
into a seated position with the help of the ReTurnBelt.
Sitting down
5
MANUAL
SystemRoMedicTM
English
• Art.nr 7600 Complete ReTurn
• 7601 Ladder to 7600
SWL, Max weight: 205 kg/450 lbs (static load)
Total weight: 26 kg/57 lbs
Patented
Technical specifications
Serialnumber
Care of the product
The surface of the product can be cleaned with warm
water or a soap solution. If disinfection is needed,
70 % ethanol, 45 % isopropanol or similar should be
used. Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com for
a complete list of distributors.
Medical Device Class I. The product complies with the
requirements of the Medical Devices Directive 93/42/EEC.
Medical Device Class I
Expected lifetime
Up to 10 years of normal use
6MANUAL SystemRoMedicTM
Indice
Altri manuali Handicare Ausilio alla mobilità
Handicare
Handicare 4000 Manuale utente
Handicare
Handicare SystemRoMedic FlexiGrip Manuale utente
Handicare
Handicare RoMedic OneWaySlide 2069 Manuale utente
Handicare
Handicare FREECURVE MONORAIL Manuale utente
Handicare
Handicare 3002920200 Manuale utente
Handicare
Handicare Linido Solutions Ergogrip 1600 Manuale utente
Handicare
Handicare Van Gogh Rembrandt Vermeer Manuale utente
Handicare
Handicare SystemRoMedic ReTurn7400 Manuale utente
Handicare
Handicare SystemRoMedic ReTurn7500 Manuale utente
Handicare
Handicare FST-300 Manuale utente
Handicare
Handicare Gemino Series Manuale utente
Handicare
Handicare LinidoSolutions LI2614.300 Series Manuale utente
Handicare
Handicare SystemRoMedic ReTurn7500 Manuale utente
Handicare
Handicare Raptor Manuale utente
Handicare
Handicare Puma 20 Manuale utente
Handicare
Handicare 1100 Manuale utente
Handicare
Handicare LinidoSolutions LI2641.000 Series Manuale utente
Handicare
Handicare LinidoSolutions LI0126.5014-02 Manuale utente
Handicare
Handicare IBIS-2 Manuale utente
Handicare
Handicare Cirrus 4 Manuale utente
