Important! Always
follow instructions
closely
Use a single-p ase AC 220~240V/50/60Hz power supply
Use wit in t e required voltage, as voltage exceeding 220V +10% will fail t e unit
Using an incorrect power supply may cause fire, electric shock and malfunction.
Use separate line
Using any other electric appliance with the same line, may cause the branch socket to
become very hot and cause fire.
Turn off t e power switc before inspecting and cleaning t e unit
Otherwise, may cause electric shock.
earth
grounding connection
Ensure t e unit is properly grounded
Otherwise this may cause electric shock during malfunction or a short circuit.
Installation work s ould be done by t e qualified tec nician.
Incorrect wiring connection can cause electric shock and fire
Be sure to install a residual current circuit breaker
Otherwise, this may cause electric shock
Use a type w ose contact points are at least 3mm apart
Please use the product of CCC standard.
Recommended residual current circuit breaker (for ground-fault protection).
(use a single-phase 2-line, AC 220 ~ 240V/50/60Hz cable with a 20A rated current,
15mA-type rated operating current)
Prohibited
Do not let c ildren ang from t e unit.
Otherwise, this may cause the unit to drop.
Important!
Follow instructions
Always use t e unit wit t e drain tank and air filter attac ed
Once water enters the unit inside, short circuit or electric shock occurs.
Wear gloves w en inspecting and cleaning t e unit
Otherwise ,this may cause injury
If t e unit does not start or works abnormally, turn off t e power switc and ground
fault breaker and contact your dealer for inspection and repair.
Otherwise, this may cause electric shock or fire due to short circuit
