Parameter No.15 VALUE OF THE BASIC SET
Motion Sensor can reverse its value of BASIC SET when motion is triggered.
0–Send BASIC SET VALUE = 255 to nodes associated with group 2 when motion alarm is
triggered.
Send BASIC SET VALUE = 0 to nodes associated with group 2 when motion alarm is canceled.
1–Send BASIC SET VALUE = 0 to nodes associated with group 2 when motion alarm is triggered.
Send BASIC SET VALUE = 255 to nodes associated with group 2 when motion alarm is
canceled.
Default setting: 0
Parameter size: 1[byte]
Parameter No.18 MOTION ALARM CANCELLATION DELAY
Motion alarm will be canceled in the main controller after 3 seconds, the alarm cancellation can
be delay by this parameter. Any motion detected during the cancellation delay time countdown
will result in the countdown being restarted.
Available settings: 0-65535 (seconds)
Default setting: 30 (seconds)
Parameter size: 2[byte]
Parameter No.32 LEVEL OF LOW BATTERY
Define a battery level as the “low battery”.
Available settings: 10-50 (10- 50%)
Default setting: 20 (20%)
Parameter size: 1[byte]
Ⅸ.FCC NOTICE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by unauthorized
modifications or change to this equipment. Such modifications or change could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
