Harbor Freight Tools 57293 Istruzioni per il montaggio
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 20j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s r eq ui r ed f o r as s em bl y a nd se rvice m ay not be in cluded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 57293
Important Safety Information
1. Do not allow children younger
than age 8 to use this Helicopter.
Children should not operate
without adult supervision.
2. Keep out of reach of children
younger than 8. Contains small parts
that may present a choking hazard.
3. Only fly outdoors during daylight
hours in an area with no
obstructions, power lines, vehicles,
animals or people nearby.
4. Do not fly in temperatures above
113° F or below 50° F.
Do not fly in wet or windy conditions.
5. Keep spectators and pets away.
Spectators should only watch
from a safe distance.
6. Position remote control batteries in
proper polarity. Do not install batteries
of different types, charge levels, or
capacities together in remote control.
7. Do not mix old and new batteries.
Do not mix alkaline, standard
(carbon-zinc), or rechargeable
(nickel-cadmium) batteries. Do not
use swollen or leaking batteries.
8. Do not open the Helicopter’s
housing or modify its design.
Doing so may cause damage
and/or make it dangerous.
9. Do not use if parts are loose
or damaged. If the toy has been
damaged, immediately stop using it.
10. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields in close
proximity to heart pacemaker could
cause pacemaker interference
or pacemaker failure.
11. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may
occur. It must be understood by the
operator that common sense and
caution are factors which cannot
be built into this product, but must
be supplied by the operator.
12. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Page 3For technical questions, please call 1-888-866-5797.Item 57293
Lithium Battery Charging Safety
1. Do not leave Helicopter
unattended while charging.
2. Battery charging should be
done by adults only.
3. Use the supplied charger only.
4. Charge on non-flammable surface and
keep away from flammable items.
5. Disconnect AC wall chargers
from outlets while not in use.
6. If battery-powered device has been
damaged, immediately stop use,
unplug, and safely move away
from flammable materials.
7. Follow instructions for charging
battery. DO NOT charge
longer than recommended.
8. Allow a clearance of at least 4"
on all sides during charging.
Personal Safety
1. Operator and spectators must
wear ANSI-approved safety
goggles during use.
2. Do not wear loose clothing or jewelry.
Keep hair and clothing, and
away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
3. Do not use the Helicopter while tired or
under the influence of drugs, alcohol, or
medications. A moment of interruption
can result in serious personal injury.
Page 4 For technical questions, please call 1-888-866-5797. Item 57293
Specifications
Remote Control Battery Type 6-AA (sold separately)
Helicopter Battery Type 3.7V / 120 mAh rechargeable Lithium-ion
Battery Charging Time Approximately 30 minutes
Flying Time Approximately 6 minutes
Cool Down Time Between Charges 30 minutes
Range 25 feet
Page 5For technical questions, please call 1-888-866-5797.Item 57293
Set Up
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Switch the Helicopter and Remote Control OFFbefore
performing any procedure in this section.
Charging Helicopter
CAUTION! Do not leave Helicopter
unattended while charging. Battery
charging should be done by adults only.
DO NOT charge longer than 100 minutes.
1. Make sure the Remote is turned off.
Open compartment at the bottom of the
Remote and pull out charging wire.
Charging
Wire
Remote
Control
2. Make sure the Helicopter is turned
off. Locate charging compartment
underneath Helicopter and insert
charging wire into the socket.
3. Turn the Remote ON. The
Charging Light on the Remote
will turn green. Once charging is
complete the light will turn off.
LED Charging
Light
4. When charging is complete, disconnect
Remote from Helicopter and place
charging wire back into its comparment.
CAUTION! Allow Battery to cool down
for 9-12 minutes between charges.
Remote Control
CAUTION! Do not mix old and
new batteries. Do not mix alkaline,
standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries. Position
batteries in proper polarity. Do not
use swollen or leaking batteries.
1. Remove Battery Cover on
back of Remote Control.
2. Insert six AA batteries (sold separately).
3. Replace Battery Cover.
Battery
Compartment
Page 6 For technical questions, please call 1-888-866-5797. Item 57293
Components and Controls
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use. Upper
Rotor Blade
Lower
Rotor Blade
Balance
Bar
Tail Rotor
Page 7For technical questions, please call 1-888-866-5797.Item 57293
Power Indicator
Light
Charging
Indicator Light
Trim
Controls
Power
Switch
Throttle Directional
Stick
Band
Selector
FUNCTIONS
UP Throttle Joystick Up
DOWN Throttle Joystick Down
FORWARD Directional Joystick Up
BACKWARD Directional Joystick Down
LEFT Directional Joystick Left
RIGHT Directional Joystick Right
Page 8 For technical questions, please call 1-888-866-5797. Item 57293
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
TO PREVENT SERIOUS INJURY:
Operator and spectators must wear ANSI-approved safety goggles during use.
Keep Helicopter within 25 feet of Remote Control. If Helicopter
goes out of range, it will stop working and fall.
WARNING! To prevent serious
injury, avoid sudden movements
of controls while flying.
CAUTION! Only fly outdoors during
daylight hours in an area with no
obstructions, power lines, vehicles,
animals or people nearby.
1. To pair the Helicopter to the Remote
Control, turn Helicopter Power Switch
ON and place on a level surface.
2. Turn Remote Control ON, Power
Indicator Light will blink.
3. Select any setting on the
Remote’s Band Selector.
4. Point Remote Control at the Helicopter
and push Throttle all the way up, then all
the way down. When Power Light stops
blinking, Remote Control is transmitting.
CAUTION! If Remote Control’s
Indicator Light does not stop
flashing, replace its batteries.
5. Position Helicopter with its tail toward
you, then stand 10 feet away.
CAUTION! If the Remote Control’s
Indicator Light flashes during flight,
land the helicopter safely, and replace
the batteries before further use.
6. When finished, turn
Remote Control OFF, then
turn Helicopter OFF.
7. Clean and store according to
“Inspection and Maintenance”
on page 10.
Checking Trim
1. Using a light touch, slowly push
Throttle up until Helicopter is barely
hovering. Helicopter should stay in
one place without excessive rotation.
a. If Helicopter rotates to left, tap
the Right Trim Control repeatedly
until Helicopter stops rotating.
b. If Helicopter rotates to right, tap
Left Trim Control repeatedly
until Helicopter stops rotating.
Page 9For technical questions, please call 1-888-866-5797.Item 57293
Practicing
NOTICE: To avoid damage to the
Helicopter, keep Helicopter between 1-3
feet off the ground while practicing. Master
each step before going on to the next one.
1. Taking Off: Slowly raise the Throttle
until Helicopter rises off the ground.
2. Hovering: Practice keeping the
Helicopter as motionless as possible
in the following 4 positions:
a. Tail facing you.
b. Left side facing you.
c. Nose facing you.
d. Right side facing you.
3. Landing: Slowly lower Throttle until
Helicopter almost touches the ground.
Ease off Throttle slightly to avoid
bouncing, then lower all the way.
4. Forward/Backward: Practice
moving forward and backward
in the following 4 positions:
a. Tail facing you.
b. Left side facing you.
c. Nose facing you.
d. Right side facing you.
5. Left/Right: Practice moving to the left
and right in the following 4 positions:
a. Tail facing you.
b. Left side facing you.
c. Nose facing you.
d. Right side facing you.
6. Box: Practice flying a box pattern,
stopping and turning at each corner.
Figure A
7. Circle: Practice flying in a
circle with the Helicopter in
the following 4 positions:
a. Tail facing you.
b. Left side facing you.
c. Nose facing you.
d. Right side facing you.
Figure B: Tail Facing You
Page 10 For technical questions, please call 1-888-866-5797. Item 57293
Inspection and Maintenance
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:
Make sure that the Helicopter is OFF before performing any procedure in this section.
Inspection
1. BEFORE EACH USE, inspect
the general condition of the
Helicopter. Check for:
• stripped gears,
• bent main shaft,
• cracked or broken rotors, and
• any other condition that may
affect its safe operation.
Cleaning and Storage
1. AFTER USE, use a mild detergent
on a clean cloth to remove any
dirt from the Helicopter.
2. Remove batteries from Remote
Control, then store the Helicopter,
and accessories in a dry area
away from direct sunlight and
out of the reach of children.
3. Li-Ion BATTERY MUST BE RECYCLED
OR DISPOSED OF PROPERLY.
Do not short, incinerate or open battery.
Replacing Rotors
Main
1. Remove Screw holding the Rotor in place.
2. Gently lift up Tab holding Rotor onto Shaft. Lift Rotor off Shaft and remove. See below.
Hole
Tab
Shaft
Rotor
Side View
3. Replace Rotor and Screw,
tighten screws enough so that
Rotor can move freely.
Note; The replacement Upper Rotor
is marked as ‘A1.’ The replacement
Lower Rotor is marked as ‘B2.’
Indice
Altri manuali Harbor Freight Tools Giocattolo
Harbor Freight Tools
Harbor Freight Tools 95149 Manuale utente
Harbor Freight Tools
Harbor Freight Tools 91131 Manuale utente
Harbor Freight Tools
Harbor Freight Tools 3514 Manuale utente
Harbor Freight Tools
Harbor Freight Tools 95125 Manuale elenco delle parti
Harbor Freight Tools
Harbor Freight Tools 56513 Istruzioni per il montaggio
Harbor Freight Tools
Harbor Freight Tools 95641 Manuale elenco delle parti
Harbor Freight Tools
Harbor Freight Tools BUCK HORN WAGON WOODEN MODEL 9141 Manuale utente
Harbor Freight Tools
Harbor Freight Tools AIR PIXIE HELICOPTER Manuale di installazione
Harbor Freight Tools
Harbor Freight Tools 95641 Manuale elenco delle parti
Harbor Freight Tools
Harbor Freight Tools 94737 Manuale utente
Harbor Freight Tools
Harbor Freight Tools River Boat Manuale utente
Harbor Freight Tools
Harbor Freight Tools 94774 Manuale di installazione
Harbor Freight Tools
Harbor Freight Tools 91311 Guida di riferimento rapido
Harbor Freight Tools
Harbor Freight Tools 92304 Guida di riferimento rapido
Harbor Freight Tools
Harbor Freight Tools Lightning Airplane with Charger 42619 Manuale di installazione
Harbor Freight Tools
Harbor Freight Tools 94840 Guida di riferimento rapido
Harbor Freight Tools
Harbor Freight Tools 94840 Manuale di installazione
Harbor Freight Tools
Harbor Freight Tools U.S. GENERAL Junior 56515 Istruzioni per il montaggio
Harbor Freight Tools
Harbor Freight Tools 90033 Guida di riferimento rapido
Harbor Freight Tools
Harbor Freight Tools 62578 Istruzioni per il montaggio
