harmoni Pro Series Manuale utente
harmoni
harmoni pro series thermostat
Instruction manual
2
Download the App
The Harmoni Pro+is Wi-Fi enabled
and can be controlled via an app
on a smartphone.
The app is compatible with iOS &
Android, and can be downloaded
using the QR code opposite.
3
Introduction 4
Technical specifications 4
Installation 5
Wiring instructions 6
Thermostat symbols 7
Wi-Fi connection 8
Operation & functions 10
Troubleshooting 16
Dimensions 17
Contents
4
Introduction
The Harmoni Pro series is an intuitive programmable thermostat used to
control either electrical or water underfloor heating systems.
It will keep the room at a comfortable temperature whilst minimising energy use.
Install the app on a smart phone to control the heating system remotely via the
Wi-Fi thermostat.
Technical specifications
Electric Water
Supply voltage 85–265Vac 50/60Hz 85–265Vac 50/60Hz
Standby power <1W <1W
Max load 16A 3A
IP class IP21 IP21
Cable specification ≤2.5mm² ≤2.5mm²
5
Loosen the fixing screw
located in the bottom
of the thermostat to
remove the front panel
Connect the thermostat
according to the wiring
instructions on page 6
Insert the back panel
into the wall box and
fix with the screws
provided
Align the tops of the
front and back panel
to refit these two parts
together. Then retighten
the fixing screw
Installation
STEP 1 STEP 2 STEP 3 STEP 4
6
Wiring instructions
SENSOR
L1N1 N L SENSOR
L1N1 N L
Electric underfloor heating
16A
Water underfloor heating
3A
Note: Please keep the maximum load to
around 90% of 16A to prolong the lifetime
of the system
Ensure power is
disconnected when wiring
7
Thermostat symbols
Frost symbol
Day indicator
Period indicator
Holiday
Hold left
Clock
Degrees Celsius
Degrees Fahrenheit
Floor limit symbol
Advanced setup
Hold parameter edit
Down
Up
Wi-Fi
Key lock indicator
Floor temperature
Room temperature
Set
Flame symbol
Temperature
Program parameter edit
Holiday parameter edit
Clock parameter edit
Confirm
Return
Power
HIGH
TEMP
SET
ROOM TEMP
FLOOR TEMP
HOLD LEFT
h
HOLIDAY
EDIT
SATFRITHUWEDMON TUE SUN
WAKE LEAVE RETURN SLEEP
HOLIDAY HOLD SETUP
°F
°C
TOUCH CONTROL PANEL
8
Wi-Fi connection
1
Scan the QR code or
download from the APP
store/Google Play
2
Register and log in to the
APP with mobile number/
email address
3
Click ‘Add Device’ or ‘+’
on the top-right to add
device
4
Click ‘Wi-Fi thermostat’
Note: Please read and agree to the
‘Privacy Policy & Service Agreement’
before registration.
9
5
Operate thermostat. If the
Wi-Fi icon quickly flashes,
Click ‘Press to connect’
6
Enter Wi-Fi password then
click ‘Confirm’
7
If device is successfully
added, device name can
be changed and region
set. Then click ‘Done’
8
Check the actual
temperature and set
temperature etc., on the
control interface
Note: If failed, confirm the Wi-Fi is 2.4G version
and check the Wi-Fi signal, then, use the ‘AP
mode’ in the top right to connect again.
10
Operation & functions
ON/OFF
Press to turn On/Off.
TEMPORARY OVERRIDE TEMPERATURE
The temporary override temperature function is only valid at the current event
and it will not be saved.
Press to set temporary override temperature
Press to confirm, the screen will return to showing the current temperature
KEY LOCK
Lock all keys to prevent the settings from being changed. On the touch control
panel, press and hold for 3 seconds to lock or unlock all the keys.
Note: When frost protection is active, the thermostat will maintain the frost
protection temperature even when the power is off.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali harmoni Termostato
