Harmopool ZFPX5310 Manuale utente
Imported by:
Zwembad BVBA
Industrieweg 9
3190 Boortmeerbeek
België
www.harmopool.eu
Manual
Air blower ZFPX5310 - ZFPX5320
Table of content
Warnings..................................................................................................................................3
General information ................................................................................................................4
Product specifications .........................................................................................................4
Parts and materials..............................................................................................................4
Usage and installation .............................................................................................................5
Installation structure ...........................................................................................................5
Appendices ..............................................................................................................................6
Technical features ...............................................................................................................6
Configuration possibilities ...................................................................................................6
3
Warnings
○In order to maintain the IP rating, the air blower is required to be mounted horizontally.
○The blower has to be installed by licensed installers
○Means for disconnection must be incorporated in fixed wiring in accordance with the
wiring rules.
○Parts under electrical tension should not be accessible for people in the Spa.
○Parts incorporating electrical components, except remote control devices are not
allowed to touch the water. Do not place these near the Spa.
○The appliance should be supplied through a residual current device (RCD), having the
rated residual operating current below 30 mA.
○Part should be installed in the correct zone. The equipotential bonding should be carried
should be included at the location.
○The appliance should not be used by persons, including children, with lower physical and
mental capabilities or by people with no experience and knowledge, unless they have
been given instructions by a person responsible for their safety.
○Please ensure that children are unable to play with the device.
○When the device cord is damages, it must be replaced by the manufacturer, its service
agent or a similarly qualified professional.
○The air blower must be grounded by a licensed electrician in order to prevent electrical
shocks or injuries.
○The outlet of the air blower cannot be blocked in any way when it is operating.
○If the outlet air flow is too small, the air temperature will increase. Check the outlet to
prevent scald.
○Please ensure that the power is off before checking the air blower.
4
General information
Product specifications
○220-240V /50Hz/ 60 Hz or 110-120V/ 50Hz/ 60Hz
○Insulation Class F
○Thermal protector (VDE or UL approval)
○Noise: Air blower with nozzle 72dB
○Motor including fuse
Parts and materials
○Pump casing: high temperature resistant reinforced plastic.
○Air switch: 15 A, 250 V (Optional)
○Carbon brush: imported materials
5
Usage and installation
○The number of nozzles installed should be higher than the regulated minimum.
○The check valve should be installed higher than the water level in case water runs in to
the air blower (figure 1.).
○The connection pipe of the air blower should be made from heat resistant materials.
○The air blower must be fixed and the connection pipe should be installed horizontally.
○The air blower can be turned on and off by an air pressure pulse. In case the blower
does not work, please insert an air pressure pulse in the connection (white connection
on the hood of the blower).
Installation structure
1. “D” in the figure is the connection with the thread, which can be mounted on pieces of 32 and 33,5.
2. “D” in de figure is the direct connection, which only fits on 32 and 33,5.
MODEL
Size (mm)
Smooth outlet
Threaded outlet
L1
A
H
H1
H2
L
L2
D
L
L2
D
ZFPX5310
276
50.5
32
269
43.5
G1½
52.5
168
179
95
130
ZFPX5320
276
50.5
32
269
43.5
G1½
52.5
168
179
95
130
6
Appendices
Technical features
Model
Power (W)
Current (A)
Nozzles
(quantity)
220-240 V
110-120 V
ZFPX5310
400
2,5
4,0
12-24
ZFPX5320
700
3,3
7,0
16-32
Configuration possibilities
With plug
Without plug
(180W) With heating component (180W)
Without heating component
With air switch
Without air switch
Questo manuale è adatto per i seguenti modelli
1
Indice
