Hartke HyDrive 112b Manuale utente
Owner's Manual
HyDrive 112b Cabinet
Congratulations on the purchase of your Hartke HyDrive 112b bass cabinet! We know
you don’t like reading owners manuals, but you’ve just purchased one of the finest
bass speaker systems around, and we want to tell you about it. So, before you plug
in and start playing, we’d like to suggest you take just a few moments to scan these
pages.
The HyDrive 112b is a 300 watt, 4 ohm bass speaker cabinet featuring our patented
HyDrive hybrid cone bass transducers. HyDrive speakers are constructed using an
outside curved paper cone producing warm low frequencies and an inside anodized
aluminum cone that produces smooth mids and high-end extension. This radical
construction provides a clean sound with a big low end, allowing you to sculpt a wide
range of tones for any musical style.
With proper care and operation, your HyDrive cabinet will operate trouble free for
many years. We recommend you record your serial number in the space provided
below for future reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
NOTE: Should your Hartke Cabinet ever require servicing, a Return Authorization
(RA) number is necessary. Without this number, the unit will not be accepted.
If purchased in the United States, please call Hartke at 1-800-372-6766 for a
Return Authorization number prior to shipping. Please retain the original packing
materials and, if possible, return the unit in its original carton and packing materials.
If purchased outside the United States, please contact your local distributor for
warranty information.
Introduction
Power Handling 300W RMS
Cabinet Impedance 4Ω
LF Speaker 12” paper/aluminum driver
Frequency Response 70Hz–5kHz (-3dB)
-10dB LF Response 35Hz
Inputs 1/4”
Cabinet Type Ported
Cabinet Construction Plywood, extensive bracing, dado joinery
Grille Black perforated steel
Product Dimensions 17” x 19.75” x 15.25”
432mm x 248mm x 387mm
Product Weight 33lb
15kg
Specifications
HyDrive 112b Bass Cabinet
When connecting the HyDrive 112b to an
amplier, only use unshielded speaker cables.
Connect your amplier output to the speaker
input on the HyDrive 112b jack plate.
IMPORTANT:Every amplifier has a minimum
safe operating impedance, so be sure to check
the manufacturer’s recommended impedance
for your amplifier to avoid any damage to your
amplifier or voiding your warranty.
The HyDrive 112b impedance is 4 Ohms. When
two cabinets are connected together in parallel,
the total impedance is 2 Ohms. The impedance
of your speaker has an effect on your amplifier.
In general, the lower the impedance, the more
power your amplifier will output.
Basically, impedance is the amount of current that will flow through a speaker at
a certain voltage. It is measured in Ohms (Ω). The actual impedance of a speaker is
not constant across all frequencies. So, for convenience we use the term “nominal
impedance”, which refers to the impedance that a speaker presents to an amplifier at
a reference frequency.
A speaker typically has an impedance rating of 4Ω, 8Ω, or 16Ω. Generally, the lower
the impedance of a speaker, the more power will be developed by the connected
amplifier. For example, a 4Ω speaker will extract more power from your amplifier
than an 8Ω speaker. If you connect a speaker with an impedance lower than the
amplifier’s output rating, the amplifier can overheat and damage the power output
section. It is important to learn how to connect multiple speaker cabinets safely
without damaging the speakers or the amplifier in this way.
Here is a simple rule of impedance: When two speakers with the same impedance are
wired in parallel, the total system impedance is cut in half, and when two speakers
with the same impedance are wired in series, the total impedance is the sum of the
speakers individual impedance.
Connecting the HyDrive 112b
©2018, v1.1
Hartke
278-B Duffy Ave
Hicksville, New York 117801
Phone: 1-800-372-6766
www.hartke.com
If you want to dispose this product, do not mix it with general household
waste. There is a separate collection system for used electronic products
in accordance with legislation that requires proper treatment, recovery
and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway
may return their used electronic products free of charge to designated collection
facilities or to a retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a
correct method of disposal. By doing so you will ensure that your disposed product
undergoes the necessary treatment, recovery and recycling and thus prevent
potential negative effects on the environment and human health.
Follow us:
@hartkesystems @hartke @hartkesystems
Indice
Altri manuali Hartke Sistema di altoparlanti
Manuali Sistema di altoparlanti popolari di altre marche
Sondpex
Sondpex Active Speaker System and Digital Music... Manuale utente
JVC
JVC NX-PN7 Manuale utente
Marshall Amplification
Marshall Amplification AR-DM61-BT Manuale utente
Yamaha
Yamaha NX-A01 - Speaker Sys Manuale utente
SE Audiotechnik
SE Audiotechnik I-LINE Manuale utente
Gemini
Gemini WRX-843 Series Manuale utente