3 of 4
STORAGE
1. Remove any ornaments and decorations that were added by you and did not come with the tree.
2. Unplug the tree from the power source in your home.
3. Starting with the top, separate the tree section, pole, and stand gently, being sure not to roughly handle as it
could cause damage to the parts.
4. Compress the tree section by squeezing the branches together so that it will fit more easily into the storage box
or container. You can also tie a ribbon or cord around the section to secure the branches closer together for
storage.
5. Place all the parts gently back into the storage box. The box will help prevent the tree from being damaged
should it get bumped in your garage, basement, or other storage location. Tape the box shut to keep out any
dust or insects. When packing up the tree, please ensure that there is no undue strain or stress on the light sets
to ensure they do not get cut, frayed, or damaged.
6. Be sure to store the tree in a cool, dry area free of water and moisture to prevent mold and mildew from
accumulating and a musty odor developing. Exposing your tree to excessive heat or humidity may damage your
tree. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100ºF. STORE
THE CARTON FLAT AND NOT UPRIGHT ON ITS SHORT END.
TROUBLESHOOTING GUIDE FORLIGHTS
If your lights are not working, the following are some troubleshooting steps to try:
1. Check that the power plug is properly connected to your wall outlet or other power source and tap the foot pedal.
2. Check that there is power to the wall outlet or power source.
3. Check that the power adapter is securely connected to the light set plug.
NOTE: LED bulbs are permanent and cannot be removed from the light sets.
IMPORTANT SAFETY
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS AND WARNING TAGS INCLUDED WITH THIS TREE.
SAVE FOR FUTURE USE.
THIS TREE IS SAFE FOR INDOOR USE ONLY.
• Do not operate this product if the power cord or plug is damaged. Always inspect light sets and electrical cords for
signs of damage or wear. If there are any observable defects, immediately dispose of them and replace it with one
that is in working order.
• Do not immerse the tree or any of its components in water or other liquids.
• Be careful not to overload electrical circuits and do not string more than the manufactured recommended number
of light set cords together.
• This seasonal use product is not intended for permanent installation or use.
• This product is not intended for commercial purposes.
• Do not secure the wiring of this product with staples or nails or place on sharp hooks or nails.
• Do not alter the construction of the wiring in anyway.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, retiring for the night or if left unattended.
• This is an electrical product - not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not
be played with or placed where small children can reach it.
• Do not use this product for anything other than its intended use.
• Do not hang ornaments or other objects from the cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
